My sony hdv 1080i mini dv camera won't capture

I've been trying to capture a video that I recorded with my SONY (HDV) HDR-FX1E camera from sony hdv 1080i mini dv but the camera would go on playing but it won't display any frame and it would show this error when i click stop stating that "recorder captured no frames". When its playing from the sony hdv 1080i mini dv camera it shows DV SP PAL on the lcd monitor.
PLEASE, someone should help me, I need to capture this video now.

As far as I know, HDV does not display during transfter from camcorder via Firewire
Try this for HD capture http://strony.aster.pl/paviko/hdvsplit.htm

Similar Messages

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Camera won't capture credit card for Apple pay

When I attempt to use the little blue camera icon option in Apple Pay to capture a credit card and it's info, nothing happens. The camera won't capture a picture of my credit card. I hold my phone camera hovering very still over my credit card making it's sure it's within the guideline over and over and nothing happens.
I know my bank and my credit card support Apple Pay.

Hi ...
Make sure your iPhone is updated to iOS 8.1
Tap Settings > General > Software Update
If it's already running 8.1, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings then try again.
Instructions for setting up Apple Pay > Apple Pay

My Video Camera won't capture sound!

My camera will not capture sound! I have done loud things to test it while recording, turned my sound all the way up, and played it to hear nothing. I put in headphones to try it, and once again i heard nothing. I was sure it was recording when I spoke and I know that there was supposed to be noise. What is wrong with my Nano?

Run through these troubleshooting steps to see if this solves your problem. Let us know if this does it for you.
http://www.apple.com/support/ipod/five_rs/nano5gen/
i

Camera won't capture image

Camera will not capture images. Purely states 'unable to capture image'. Video camera comes up with coloured lines, no image. Reasonably new handset, have tried rebooting and clearing down all apps. Any ideas??

Sounds like a hardware problem to me but i could be wrong. Try backing it up and doing a security wipe and see if it helps.

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

I need help connecting my HDV 1080i to my Macbook Pro

I bought a Sony HDV 1080i, and I cannot get it to record onto my 2011 macbook pro.
Serial # HDR-HC1
I have a firewire cable, but when I connect my camera nothing shows up...
I really want this film on my computer.. If anyone could help id be more then thankful!
Thanks,
Miranda AND Seamus

Let me see if I can answer these questions. I’m somewhat new to wireless networks.
Do you mean you've assigned a fixed IP based on AppleTV's wireless MAC code?
I assigned the IP address from the Apple TV to my list of accepted IP’s on the network
What sort of 'security' are you using to stop it connecting?
Just simple WEP.
When you secure the network does AppleTV still see it but give an error?
Yes, it sees it fine and the signal strength is FULL.
Any peculiar characters in the password or SSID?
None
Have you manually entered the settings in AppleTV too incuding the IP address?
I tried both Automatic and Manual.
On both the prompt says it's connect to my network however; it will not connect to Itunes, Youtube, etc…

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Can Sony's HVR-M10U deck's playback of HDV 1080i 60i footage be captured?

Does anyone know definitively if Sony's HVR-M10U playback of HDV 1080i 60i footage can be captured in FCP?

After a lot of research & trail/error I have successfully captured 1080i 60i footage into FCP 5 using Sony's HVR-M10U deck.
For anyone that's interested here are the links that helped me along:
http://www.kenstone.net/fcphomepage/review_z1u_hdvfullmer.html
http://www.kenstone.net/fcphomepage/hdvxdvwright.html

IPad mini camera won't load, what's wrong?

I click my camera button and the camera won't load. It's hard to describe, but just the lense-like black shutters show

Try resetting your iPad. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
Then try the camera again.

No external video from HDV timeline through Sony HDV deck.

Without buying an external video card, is there a way to view an HDV timeline on an external monitor? I can capture HDV footage easily and see it play back fine in the Canvas on my Mac Pro, but I can't see the captured HDV footage on my external monitor that's hooked up via FireWire to my Sony HVR-M25 deck.
Here are the Audio/Video Settings I'm using:
Sequence Preset is HDV - 1080i60
Capture Preset is HDV
Device Control Preset os Sony HDV Firewire
I'm also noticing that the Video Playback HDV options are grayed out, so I'm assuming I would either need an external video card to play back the capture HDV footage the timeline on my external monitor, or use another combination of codecs to (maybe) use my stock Mac Pro setup. Whew.
Thanks in advance.

No. Sorry, but the format doesn't allow it. You can send a downconverted SD signal out via firewire in realtime, but it won't be your full HD image. If you want the full HD image, you need an HD capture device. #25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor in high definition you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
The real reason why you can't monitor HDV through a Firewire camera is because Firewire HDV cameras don't decode incoming HDV streams and route them to their outputs like DV cameras do.
Good options for you are the Matrox MXO2 mini...$450...coupled with an HDTV. Or a Matrox MXO (DVI connection) coupled with an Apple 23" display gets you good quality.
And there are the Decklink Intensity and Intensity PRO cards as well, and the AJA I/O Express...
You can, however, view HDV out via firewire as DV...lowering the resolution to that of DV, but still viewable. This is not full quality nor should it be used to judge the quality of your footage or used to color correct to. This is just a way to view the footage on a large monitor.
Here are some examples of some of the possibilities:
- DV or HDV sequence output to an SDI signal on a third-party interface
- An uncompressed NTSC or PAL sequence output to a DV FireWire output
- An HDV sequence output to a DV FireWire output
Sequence and output formats must have compatible frame rates. For example,
sequences with a frame rate of 60, 30, or 24 fps can be output to a 30 fps device,
but not to a 25 or 50 fps device.
Shane

Unable to export with Sony HDV

Newbie needs help!
I am using the Sony HDV 1080 recorder Model HDR-HC5.I can import into Final cut pro 7.0.1. and I am connecting via firewire/i link. But I can not export. The camera turns on as if it is going to record but the screen stays blue and it recorde nothing. What I am I doing wrong?? I have tried all kinds of different settings but nothing is working?
The sequence is 1920x1080 HDTV 1080i (16:9) not sure what else you might need...

okay. did you capture via firewire? did you capture as HDV, or did you convert to any other codec when you captured?
If you captured HDV, then having your footage in an HDV sequence, rendering/conforming, should do the trick, and you'll be able to export.
Exporting to HDV via FW is time consuming, because it needs to rebuild the GOP structure and create a new HDV file to send out to the tape.

Canon mini Disk camera doesn't work if external drive connected

A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago. Both "live" video and from the recorded mini cassette tape. Then all of a sudden not one of the software recognized my camera anymore. I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. I checked my Sony WX-5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the USB connection.
The problem started like this.
I was downloading a file. Had to work for an hour and when I came back upstairs. I noticed that the screen was frozen.   So, I shut the Mac down. And when I started it again, well nothing happened except for a grey screen. A half~sized cursor was stuck up in the top left. But, my mouse also had a cursor which was movable.
It wouldn't even recognize the OSX Install Disk holding down "C" or "Option". Only starting with "Shift" held down, "Safe Boot" could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express they still couldn't recognize my camera. I had been using the Canon FV M10 camera for a few years with both external hard drives on. There were never any problems until just before I sent it into the shop.
There was only one way to use my camera. Un-Plug the external HD6. Then the camera functions fine. but remember I had been using this camera with both HD's for around two years without any problems.
Notes on symptoms: and what actions I took.
Front connections: FW400 Canon camera. FW800 (Tried connecting HD6)
Rear Connections: USB2 1) MidiMan 2 x2   2) mouse 3) Canon Printer
                               FW400 HD5 FW800 (tried HD6)
With HD6 Connected.
iMovie 11 9.02 : Start iMovie O.K. No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie.
2nd start: Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
iMovie shows (not responding) When I turn off the camera. (not responding) disappears and iMovie is working again. But, "No Camera Connected" shows again. Quit!
Un-Plugged (Ejected) HD6.
When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.
"No Camera Connected" I Quit iMovie.
Re-start iMovie: Camera on… Live video and record miniDV tape can both be seen.
Skype: Both live video and mini DV tape recording even plays back over Skype screen.
iChat (same as Skype) O.K.
Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00 (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
The call to Apple Tokyo today.
Just talked to Apple (Mac) Tokyo about my computer problem. Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and here is the basic problem.
I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few years (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives. And Apple said that it's a 3-party problem. (different makers etc.) But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac) to the board.
When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6 all of them work fine. The camera "live" or the camera playing back the mini DV tape video.
Wouldn't this be a problem between the connections (front & back) to the new video board? Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help! thanks

+My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

Final Cut Pro 7 not recognizing Sony HDV Deck on older 2008 version MacPro's

I am trying to connect a Sony HDV deck to Final Cut Pro version 7 on an older 2008 version MacPro. The problem was with the firewire mini port on the back i believe because i used a different deck which was the same model - but the only difference was it had a firewire 400 port instead of mini firewire port. Anyway, the deck with the 400 firewire port worked for logging and capturing, etc... (this also worked when i re-tested it on the 2008 MacPro) Im wondering if anyone else has had problems with the firewire mini port on the Sony HDV deck because it seems like almost every HDV deck i have with mini firewire has problems connecting to final cut pro or any editing application. I know now that the deck i had in question the mini port is not working correctly but is there a way to fix this or prevent the cable - deck from terminating the connection with the mini cable being used. I dont need an answer to the deck problem because i figured it out but just wondering if anyone has some insight on this deck problem. Thank you...
Kyle

>I dont need an answer to the deck problem ... just wondering if anyone has some insight on this deck problem
So you don't want an answer, just insight. OK, I'll give it a go. I've had several Sony VTRs with the 4pin Firewire port (proper name for what you refer to as "mini"), which is the same type of port that most DV and HDV cameras use as well. One of the main things you need to be wary of is plugging in and unplugging a Firewire cable while either the device or the computer is powered on. I know that marketing hype claims that Firewire is hot swap-able, but it really isn't safe to do so. The pins in both the 4 pin connector as well as the 6 pin connectors are very close together and if they aren't aligned exactly right with the socket, can easily cause arching and damage a Firewire port on either or both ends. Is that the kind of insight you were looking for?
-DH

IM IN SERIOUS NEED OF YOUR HELP! HDV 1080i 50 capture into Final cut pro 7?

Hi everyone, Ive just recently got myself an IMAC with final cut studio. I also have a Sony HVR Z5. I have been shooting on the following settings:
HDV 1080i 50 (scan type 50)
Ive connected the camera to my computer via firewire but have been having huge problems working out what settings to use? Ive tryed the easy set ups but still no joy? I keep getting the following message pop up:
'No date device. Capture was aborted due to lack of incoming data from device. Check your connections and that the disk is palying'
The disk is def playing on my camera (I can see it on the viewfinder) but not on the computer?
If anyone knows hot to solve this problem could they plare give me step by step instructions on how to set up final cuts capture settings?
Thanks very much

There is only one correct capture preset. Don't go screwing around with trying different ones, you'll just mess up your preferences file and corrupt it.
To start trash your preferences.
http://www.fcpbook.com/Misc1.html
Set the HDV 1080i50 preset. Make sure the camera is set to output HDV and that iLink is switched off.

My sony hdv 1080i mini dv camera won't capture

Similar Messages

Maybe you are looking for