My sound device does not work after yesterdays update

after the last update my sound device is out of system.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Similar Messages

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Satellite U400-17R - Sound device is not working after installing XP

Hi there,
I purchased a U400-17R Model with Vista Home. i Formatted it and installed Windows XP Professional downloading the XP drivers from Toshiba site.
Everything works but my Sound Device is not working. when i check in the Device Manager the Sound Drivers are there and it says working properly.
I am Lost...Can anyone please help?

Hi!
On Windows XP you have to install two patches from the Microsoft Knowledge Base for high definition audio cards. If you only have SP1 or SP2 you need the patches but if you have SP3 you dont need it because they are a part of SP3.
Both patches or SP3 must be installed *first* and then the sound driver. So if you have installed the sound driver first you must remove it and then install the patches again. After this it should work with the sound:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Bye

USB device does not work after sleep

The problem in the following:
X230t in tablet mode,
connect to the USB port of the adapter USB to COM Port (ftdi232) all works fine,
but if not disconnect the adapter from the USB port and put the laptop into sleep (or hibernation) the following inclusion is not determined USB adapter (or other device) and does not work pen (stylus)
until you restart the laptop.
What to do?
How to fix it?
Please help, this is terribly annoying.

Thank you friend, I do not work and a stylus. Since he is also on usb!
Lenovo and for some reason does not want to fix it.

MacBook Pro Late 2011 Model - Does not work after Yosemite update

i recently updated my OS to Yosemite and had in problems for two days but yesterday it ceased to work in the middle of printing a document.
I need my laptop back up and running since I have school exams soon and vital information and files are in this laptop.
i Have never had a problem with the laptop before.
Issues that I have had
logging in takes at least 20 minutes
cannot progress further than that, desktop is blank and nothing loads, only the dock.
battery drains extremely fast
Safe boot does not even load
I've tried clearing that VRAM and the other one.
Cannot access anything at all
This is appalling and at the worst possible time.

Please describe exactly what you're doing and what happens.

HT1192 caps lock function does not work after latest update

Hi there,
I have a Macbook 13" Early 2011 and recently after updating my operating system to Mac OS X 10.7.4, i have found that the caps lock button isn't functioning.
At present if i hold or press the button, it is failing to light up or function at all.
Is there a fix for this issue, as i have read that there was an update by Apple to stop accidental pressing of this key, however not being able to access its function at all seems to be unusual.
Your thoughts and opinions would be much appreciated,
Thanks,
Robsterhill101

My Macbook Pro Early 2011 15" (base model) did this to me last night.
I did a PRAM Reset, the generic "Cure All Procedure" for Macs. It worked after, but I noticed that the button had to be pressed at just the right angle and with enough pressure. The light would come on and off and Caps Lock functions properly. Continued as normal.
I put the computer to sleep by simply closing the lid, and then put myself to sleep as well.
This morning, just before I came on here, my computer would NOT wake from sleep (a whole other issue). Would not wake up by pressing the power button. So I had to do a hard reset, hold the power button down, and press it again after...grrr I never feel good being forced to do this.
Anyways long story a little bit shorter, I restarted my computer and low-and-behold the Cap Lock is not working again. No Bueno, Cupertino.
No, sorry, no liquid damage on the keys, and I don't have kids, nor share my computer with anyone but myself.
Its one of the few things that bug me about this computer. The other is the issue of the computer not being able to wake from sleep. Too often.
SHOULDA BOUGHT THE APPLE CARE
Simply Because, perfect timing after the years original warranty, you will experience problems. After all, they do want you to be a repeat customer. IYKWIM

Sounds in apps not working after iOS8 update

Has anyone else had issues with apps not playing sound after the update? I have a 5S and have reset it with no luck; sound plays through earbuds just fine, also plays the typing sound without earbuds. Seeing this with YouTube and Facebook as well as other embedded media.

Has anyone else had issues with apps not playing sound after the update? I have a 5S and have reset it with no luck; sound plays through earbuds just fine, also plays the typing sound without earbuds. Seeing this with YouTube and Facebook as well as other embedded media.

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Sound driver does not work after reinstalling XP on Tecra M9

Hi,
After lot's of fighting i've given up. It's just been imposible to get my sound card up a running on my TECRA M9 PTM91E, after i decided to give it a clean up by formating the disk entirely. My proceedure goes as follows:
1. Installed WINDOWS XP SP2
2. Downloaded of all drivers on another pc. Downloads from toshiba's official driver site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
3. Installed drivers in correct order following instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
4. No luck when attempting to install sound card driver (download page specifies an integrated realtek) tried following version first: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
5. Messed around trying older drivers from other TECRA M Series laptops, no luck either.
6. Decided sound card just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. Tried those but got back a non recognition alert.
Has anyone had this problem as well? My best guess it's just might be a problem about the driver version...

Yes, I have exactly the same problem.
We are building our master unit and we *must* do a install from bare metal of all the software. We do an automated provisioning for the rest of our massive purchase.
We have build a custom version of the Windows XP SP2 installation CD (with disk and chipset drivers injected). It has been working ok.
We have installed all the software drivers using the same procedure as yours (in the order proposed in install.txt).
The only thing that has failed is the sound.
This is the first place we ask for a solution. I hope we will have an answer (from toshiba) soon.

Scanner samsung scx-4300 does not work after software update v 2.3

hi everybody,
i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
I'm no longer able to scan from my Samsung SCX-4300
on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
is there a way to uninstall the software update?
thanks.

What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
If I delete the following:
- Samsung folder in /Libraries/Printers/
- Samsung Scanner.app in /Library/Image Capture/Devices
Will it remove samsung driver for printer and scanner?
If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

Apple TV does not work after software update

After being prompted and loading (I think) the newest ATV update all I have on my TV screen is the iTunes icon and underneath that an icon of a USB cable icon. When the power is plugged in the ATV status light blinks continuously. Please not my home share is turned on. What can be done to troubleshoot and solve this problem?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.

Device-mapper not working after kernel update

Hi, yesterday i've upgraded kernel to 2.6.36 and I was so happily so i rebooted immediatly, but it ended up with error. that it can't found /dev/mapper/archarray-archroot, which is, of course my root partition.
I'm using to raid1 partitions:
/dev/md0 with boot ext2 partitions (archboot partition)
/dev/md1 with LVM (volume group arrcharay, partitions archroot, archvar and archdata)
When in sandbox i've tried lsmod and i see, that i have raid1,ext2,ext4(root partition),md_mod and dm_mod loaded(and some more of course), so i think there's nothing missing to fire-up root partition.
I've tried to boot up install (from USB stick) and mount root patition with following:
modprobe dm_mod raid1
mdamdm --examine --scan >> /etc/mdam.conf
mdassemble
vgscan
vgchange -ay
And it worked, so my disk nor LVM setting is not broken.
Only thing that i think i can did wrong, is that i've commented /dev/md1 entry in /etc/mdam.conf. I was confused by "name=archiso:1" because i haven't use "archiso" anywhere when creating LVM volumes. So i thought i will try it, and if anything go bad, i will undo this. But it worked ... until kernel update.

It was problem with my badly edited /etc/mdadm.conf, so I'm sorry for this.

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Cisco WS-2960S-48TS-L does not work after firmware update

Hello.
After purchasing the Cisco WS-2960S-48TS-L decided to do a firmware upgrade using the CISCO NETWORK ASSISTANT. Unfortunately update failed. Currently the switch when you run can not load the system image.
Since up to now I had to deal with the other switches do not really know how to upload the correct image now. The more that you connect the switch through the console acts as to a limited extent.
Please help

Thank you Leo Laohoo.
Your suggestion to usbflash0 helpful.
It is true that I was struggling because of usbflash latest iso system also did not want to go, but I recorded version of one lower and went.
By the way, I learned that the USB must be formatted to FAT file system.
Again, thank you for your help.
Darek Rynkowski

Pioneer DVR 106D does not work after firmware update

I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

Hallo und Willkommen zu den Apple Diskussionen.
Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
many thanks
mrtotes

My sound device does not work after yesterdays update

Similar Messages

Maybe you are looking for