My sound is fine but my mic isnt working. how do i fix or figure out whats wrong with it

Title says it. I just did a clean wipe on my computer and now my mic isnt working on vent or skype, i dont know what is wrong with it. When i go to my sound hardware it says my external mic, IDT high def audio codec is enabled..

Same thing here. Must be update related. Who knows. Tried to go into ventrilo today and nada. Can hear people fine, microphone not picking. In my devices it says my Anvex Virtual Audio is "not available", same with the "IDT High Definition Audio Codec. Now I'm starting to get a little agitated. No diagnostics have come back with a ping on the issue. All settings seem fine. I HAVE AUDIO, as in my speakers are working so **bleep**.
I'm lost. No clue how to fix it. Guess I'm no longer raiding and that if this isn't working I'm going to go buy a Dell and rage beat this piece of **bleep** in the yard. That's right. I am taking 3 years of continual frustration out with HP errors, Vista complications and overall disatisfaction.
If you can fix this problem I will offer you pictures of fluffy kittens and circus acrobats/contortionists. Now fix my ventrilo. lol

Similar Messages

Ai changed my email for my apple id, but i can't change my iCloud ccount because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

i changed my email for my apple id, but i can't change my iCloud account because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

The sound on my macbook air has stopped working, how do I fix this? :(

It was working fine, suddenly there was a sudden static noise and it just stopped working completely.
i have tried restarting the macbook but nothing seems to work..

try resetting your PRAM. also what do you see on the screen when you change the volume? does it like like it normally does when changing the volume?

I just bought a macbook air, I want to cut en paste, but it doesn't work, how can I fix this?

I just bought a macbook air, I want to cut and paste but it doesn't work. How can I fix this?

that all works, no problem. but if I want to devide my songs per genre, it doesn't work. in itunes you find cut, but I can't select it. I just can copy my songs or photos. So I've got everything twice. Can you explane me how I can do that? cause it's my first Apple computer

The sound on my macbook air isn't working how can i fix this

i was on line and i went to watch a video and the sound wasnt working and it still wont work everything is on but its not working out

Welcome to Apple Discussions
Some times simply quitting any and all sound Apps (iTunes, QuickTime, any audio player) restarting often solves the problem. An SMC reset might also work.
If the laptop went to sleep with headphones or external speakers plugged into the headphone jack loss of audio on wake can result. In future do not sleep with headphones or speakers attached.

HT4528 The sound on my iphone 4 doesn't work, how do I fix?

The sound on my phone has stopped working. Went to play music and didn't work. Adjusted all side buttons, still doesn't work. Won't let me turn up volume. Silent button is off.

Did you check the long verticle silver button on the left side of the phone? It is above the + & - Keys. If it is pushed down, you will have no volume. THis is a key to quickly shut off the volume if you forgot to trun it down during a meeting, funeral, etc. If that is okay, go into settings and see if volume is turned on. "vibrate" is no longer an option by itsself.
Helen

My iphone5 camera keeps freezing and turning black and purple and becomes fuzzy. I tried to reset it a few times but it didn't work. how can i fix this?

How can i fix my camera that keeps freezinf and turning black or purple? I have already tried reset multiple times and it didnt work.

Hello there mmon11,
If by reset you mean this process from iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting from here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then alright thats one step down. I would recommend this article as well, specifically sections 1, 3, and 5 which will resolve it if the issue is due to software.
iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/#section_1
Here is section 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Regards,
Sterling

My right click feature on my mac isnt working how do i fix this

when i go to use the right click feature it doesn't work any idea how to fix this?

Back up all data.
Select the problem mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar.

My iPod shuffle 4th gene. says it sync all my music but when I want to hear it, it doesn't play ...works on my iPod touch and iPad so what wrong with my iPod shuffle?

The songs worked on my iPod touch and iPad

Your iPod shuffle has only 2GB capacity, so unless your iTunes music library is small, it is probably NOT syncing "all" of your music. It may not be syncing any songs... If you use automatic syncing, you may need to set up the shuffle's Music tab in iTunes.
Connect the shuffle and select it in iTunes. There is a row of "tabs" (starting with Summary). Select Music there. This is the Music tab, where you tell iTunes how to sync the shuffle with songs. Sync Music is checkmarked forautomatic syncing.
If your entire iTunes music library can fit on the shuffle, you can choose to sync Entire music library. Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Create your selection of songs below. For example, if you want to keep it simple, create a new regular playlist in iTunes. Put ALL songs you want on the shuffle on that playlist. Back on the Music tab, find and checkmark that new playlist under Playlists.
When you click Apply, your selection of songs on the Music tab syncs to the shuffle, replacing its current content. Going forward, any library changes that are related to the Music tab settings sync automatically when you connect the shuffle, or when you click Sync. So, if there is a playlist with your shuffle's songs, you can just update that playlist (add and remove songs) whenever you want; iTunes automatically updates the shuffle with the same changes at the next opportunity.

I have an imac late 2006 . And I installed windows 7 it thinks the sound is fine but I cannot hear a thing on the windows 7 partition side of the computer.

I tried asking this question on the microsoft forum technical support site here is the dicussion.
Me
For the specs it necessary 20-inch http://support.apple.com/kb/SP28
For audio it says, "Built-in stereo speakers, built-in microphone, optical digital audio output/headphone out, optical digital audio input/audio line in"
How do i fix the sound?"
Responder
Hi Keith2war,
Follow the suggestions listed below for a possible fix:
Method 1: Let’s run the “Audio Troubleshooter” from the following article and check if it helps.
Open the Playing Audio troubleshooter
http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshoote r
Method 2: I would suggest you to follow the steps listed in the Microsoft help articles mentioned below to fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problem s
No sound in Windows
http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows
Let us know if this helps."
Me
"The troubleshooting audio playback did not help, it says it cannot find any problems. Windows 7 says I have a "High Definition Audio Device" sound card with no question mark. When I right click on the sound card and click properties under the general tab device status says "This device is working properly." This computer is an all-in-one imac therefore it has built in speakers however i tried pluging in speakers and they make almost no sound. In addition when I have them plug in when runnning mac snow leopard it make an ok amount of sound just not as much as the computers built in speakers. When I have them plug in when running wwindows 7 their volumn is max out with almost no sound. Windows 7 says I have a "High Definition Audio Device" sound card but i was wondering if its mistaken and the sound card has a different name but this is speculation. The windows 7 thinks the sound driver/card has the most up to date software. "
Responder
This is a common problem when installing Windows on a Mac.
AFAIA, you'll need to i nstall W7 specific audio drivers on the W7 partition.
However you may be better asking this question on an Apple forum.
Cheers,
jerry"
Also while you are at trying to fine a answer, this mac has a camera and other things, how do i test everything to see if they work on both sides.

I tried searching through the other questions here is a question if answer well help answer the first?
How do I figure out what is my sound driver is called? I think Windows calls it High Definition Audio Device however something about the windows is mistaken because I have no sound. But when on the mac side I do not know where to look either. If I can find out what the sound driver is called then I can fined a update download. The other similar questions that were answered suggested that the sound driver needed updated.

What can be done to correct slow video or freezing in Adobe Premiere Elements 12? Sound plays fine but the video is too slow to even start a project.

Sound plays fine but the video is too slow to even start a project.

film78
On what computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 yet? If not, please do so by using an opened project's Help Menu/Update.
Not enough information in order to help you.
Looking for
1. Properties of source media (including file extension and brand/model/settings of camera that recorded the video).
2. Is problem restricted to one particular file in one particular project? What happens if you start a new project? What is the
duration and size of the project when performance is slow and freezing sets in? What are you doing in the program when this happens?
3. Using a pen and tablet device instead of a mouse?
4. Does problem exist if antivirus and firewall(s) are disabled?
5. Please describe computer environment, including dating on video card/graphics card driver version. Did you install the program to the
default Local Disk C? Where are the Scratch Disks directed and how much free space there?
Lots more questions, but let us start here and then decide what next based on your reply.
Thank you.
ATR

I'm trying to play an .mp4 video, but it does not display smoothly; image is jumpy. The sound is fine, but the image starts and stops. When I play the same file in WMV, displays just fine.

Any suggestions on what I can try to clear this up? Videos that I have downloaded through iTunes work just fine. I don't know how to troubleshoot this file to see what is causing the issue.

bertjones00 wrote:
It reads other DVD's just fine. I've tried playing commercial DVD's and homemade movies and they all work just fine. I'm also able to create and read data discs with no problem. I'm only having trouble playing this one particular DVD movie. I'm able to play the movie in my PS3 with no problem and can play it in a regular HDMI DVD player. I'm not sure if my computer doesn't recognize the encoding for the movie or if I need to download another type of software to play the movie. Someone suggested that i try using PowerDVD to see if it could play the movie.
Ok then tell me this what is that DVD your having problem watching then? And what Region Code are you from like Euro is Region 2 and so on??? Could be the Region problem on the DVD doesn't match your drive Region as well?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

My imac screen works fine but it keeps flikering and freezing whats wrong with it

my imac screen works fine but it keeps flikering and freezing whats wrong with it? theres no crack or problem with it it just freeze's ande flikers

It sounds as if your graphics chip (on the logic board) is failing. The other answer could be that your screen is not well, but I lean more towards the graphics chip. If you have Apple care or are still under warranty, call Apple.

My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Photos in my from my iPhone have same numbering as photos from my dig camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. Help?

Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.

How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT

My sound is fine but my mic isnt working. how do i fix or figure out whats wrong with it

Similar Messages

Maybe you are looking for