My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Similar Messages

My sound on FaceTime is not working after downloading iOS 6 ??

Ever since I have downloaded iOS 6 when I am on a FaceTime call nobody can ever hear me. Has anyone else had sound problems since the new update ??

Re: My sound on FaceTime is not working after downloading iOS 6 ??
Apr 8, 2013 12:16 AM (in response to B69B69)
same issue here... And a restore didn't do any good either.
Try backing up your information to iTunes, and Restore your devices as new with no content on it what-so-ever. If the issue persists after that, this may be a hardware issue. Check your Mic's for debris, and remove the case you have on the device as well to see if you have the same results. Then contact Apple Support if all else fails.

Google Chromecast does not work after downloading Blackberry Link

Google Chromecast does not work after downloading Blackberry Link.
Both don't work in tandom at the same time.
Some elements of Blackberry Link are interferring with Google Chromecast's detection and casting.
Please rectify the problem.

Yes they are not compatible. I do not have either program so could not try anything.
Try running one in a different compatibility mode.

Scan doesn't work after downloading Windows 10

After downloading Windows 10, scanning will not work on my HP Officejet Pro 8620 all in one printer. I used HP Print and Scan Doctor program and it stated that it fixed my scanning problem. However, when I attempt to scan I get a message that says it cannot find the application to support the selection. BTW...I have also unistalled and reinstalled the driver for this printer thinking it might been to "reconnect" in some way with Windows 10. On another note, by DVD drive now doesn't work either after downloading Windows 10. HELP !!

Hey there,
Try the following step's, i believe it will help you overcome the issue.
1.Start by dissconnecting the USB cable.
2.Remove the Printer Driver from the "Devices and printer's" which can be found in the control panel.
3.Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the full solution for the HP Dj 1510 series.
4.Extract the contents from within the file.
5.Open up the "Utils" Folder and within choose the "x64" folder, Inside you should be able to spot a File called "RemovePreInstalledDrivers" >> After you will open that file a Black screen will open, Wait for it to close then move to the next step.
6. Go back to main folder where you have already extracted the software and Right click on the x64.msi file (Name will most likely consist your printer model) and choose the "Repair" Option. >>Afterwards you will be prompted to preformed a restart. (Incase you will get a Messege saying "This action is only valid for products that are currently installed" Just double click the file instead)
7.After the restart, Head into Local Disk C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
8.Follow the steps shown to you and connect the USB cable when you are asked to.
That should add the scanner to Your imaging devices.
Best Of luck~

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Alerts sounds are not working after upgrading to iOS 7.1.2

Hi,
I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

I got this issue resolved.
It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
It has been fixed by cleaning the charger slot by toothbrush! with some
drops of a cleaner.
Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Script does not work after download

Hi,
I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but fails when downloaded through an application. I downloaded form and to check if the scripts are still there or not, the script was present, but would not simply execute, for ex. while on clicking of button, certain fields on the form are to be hidden, but this would not work.
ex. this.parent.parent.StaticText39.presence
= "hidden";this.parent.parent.STELL_STEXT.presence
= "hidden";
The above scripts work perfect durong designing the form, but would not work after form is downloaded through an applciation. Could any one have answer to wierd behaviour?
Regards,
Shishir.P

Was the form saved as a dynamic XML form?
While the default preview in LiveCycle Designer may be set to dynamic XML form, thus providing the dynamic behaviour you are seeking, if the form is not saved as a dynamic XML form Adobe Reader and Acrobat will not respect the changes to the presence property at run-time.
Steve

[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

Satellite Pro U400-15I - Sound Wheel not working after Windows 7 install

The sound wheel on my Satellite Pro U400-15l does nothing after the Windows 7 clean install from XP pro.
I used the recommended Software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - just not under the control of the wheel! Also the Toshiba Power control is not there but this is not a problem.
Any suggestions welcome.
Bob Sheppard

Hi Syntax,
there is no option to add the volume control to the taskbar in the control panel.
The sound driver is 'Conexant High Definition Smart Audio 221'
Interestingly, when I click on the speaker icon on the taskbar and select the mixer option I get 3 sliders called 'Device','Applications' and 'Sound Volume Indicator of Toshiba Control'. If I move this slider with my mouse I get the indicator I am looking for ( The Toshiba indicator I had under XP). However, this slider only works as a 'minimum' for the other sliders.
Thanks for your help but I still would like that volume indicator back!
Bob Sheppard

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

USBs not working after installing Windows 7. Please assist.

HP - Beats Special Edition
Model: 15-p030nr SKU: 7018105
Problem: 3 USB ports are not working. Does not acknowledge devices plugged into any of the PORTS.
I installed Windows 7. I install all the drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...
I notice there is not any CHIPSET driver folder.
Already attempted START/DEVICE MANAGER/UPDATE DRIVERs. None could be found.
Please advise.
This question was solved.
View Solution.

Hi:
See if downloading and installing the amd chipset drivers works for you. Reboot after install.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Epson XP-810 Not Working after Downloading Yosemite.

I have an Epson XP-810 printer. After downloading Yosemite, the printer has stopped working with all of our Macs. It connects to the wifi network. The printing job starts. After that the job box says looking for the printer. I have checked for all updates, I have downloaded all drivers from Epson, I have turned off the printer and the computers, nothing works. I have deleted the printer and re-installed several times. It shows up in the printer & scanners box but it still will not print or scan. Does anyone know whats up?

Well you've tried just about everything. Just curious, after I installed Yosemite I had an update notification for the latest Epson driver for my XP-410. Not the same printer of course, but did you receive an Epson driver update notification from the App Store?
You can try to "reset the printing system". In the System Preferences Printers & Scanners window press the Control key while clicking in the printer list. Then select the reset choice.

Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

Welcome to the Apple discussions.
First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

Keyboard not working after restoring windows 7 from windows 10

Last Friday (7/31/15), I upgraded Windows 10 on my Sony laptop from Windows 7 Home Premiums. My Windows 7 worked fine before the upgrade. After upgrading to Windows 10, I had experienced issues with my Outlook mails (send/receive errors) and other apps (iTunes did not run, Google Chromes did not run, etc.) that I had under Windows 7. With Windows 10, I did not see my iPad or iPhone when trying to connect to my laptop, either.
With these issues/problems, I decided to restore back to Windows 7 (8/4/15). Windows 7 was restored on my laptop, and I am able to see my familiar screen, but my keys are frozen! I tried to navigate by clicking my mouse or hitting any key on my laptop, but nothing happens. I tried to reboot my laptop with different ways below, hoping to resolve the frozen keys but still did not work.
Turn off my laptop and open in "safe mode", "safe mode with network", "safe mode with command", and "start windows normally". (tried many times)Remove the laptop battery, let it sit for 1 - 5 minutes, put back the battery, and turn on the laptop. (tried many times) Please help!!!!! I haven't been able to use my laptop since the upgrade to Windows 10 (July 31, 2015) and restore to Windows 7 (August 4, 2015).

Sounds like you've done everything right. Delete the prefs again, following the instructions here: Replace Your Preferences
If that doesn't work, take another look at what else is running and turn off stuff that you don't need to see if there's a conflict, and wait to see if Bob pops in.
As a last resort, uninstall again, then run the clean script befor you reinstall: Run the CS4 Clean Script
This was a clean install of Win 7, not an inplace upgrade over Vista, right? The upgrades are known to be iffy, so if that's what you did, think about doing a clean install instead.

My sound is not working after downloading windows 10

Similar Messages

Maybe you are looking for