My sound is working but not my

ok i just bought a new soundblaster Li've! 24-bit and i got the sound working but my microphone doesnt work... what the hak? im 50% positi've that its in the right jack, and i also disabled onboard sound on my BIOS and in my creative surround mixer application, under the REC section i changed to microphone and i made sure the "Do not monitor" has not been enabled. can you pleaseeee help me? thnx.., o yea more question, the soundblaster Li've! 24-bit uses creative labs EAX regular? not creative labs EAX 2 or 3. thx please answer
-Hyun

Welcome to the forums.
If you have a video that is muxed it is possible in converting it that one or the other tracks (audio or video) will get left behind. You will need to demux it first and then convert it to MPEG4 if this is the case:
http://docs.info.apple.com/article.html?artnum=61608
Now, this assumes the video was MPEG1 or MPEG2 in the first place. If it started life as an MPEG4 it ought to convert properly -- check it out in iTunes (Ctrl-I) and see what the resolution and maxbit rate are to make sure they don't exceed the iPhone specs. If within the specs you can always try resetting your phone (it never hurts and sometimes helps).

Similar Messages

  • Sound card works but not when rebooting

    i followed all the steps...
    alsaconf
    alsamixer
    /etc...noise.wav
    alsactl store
    edited the rc.conf
    sound works but when i reboot, before the root i get the error... sound card not found?

    check in rc.conf and see if your sound module isn't listed. Odd that it doesn't find your sound card on boot.
    U may also need to run alsactl store as root. Permission problem, possibly?
    sounds like alsaconfig is finding and loading the module each time u reboot, but its not being loaded because I think u need to run alsactl store as root, since it needs to be loaded by the kernel. That would require root privileges I would think. That's my best guess.
    Last edited by jacko (2008-01-10 22:38:10)

  • I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.

    I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.
    Now it is not working even with fliping, is the problem with hardware or software?
    Is any soloution to solve the problem?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

    My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • TS3274 Getting sound for music, but not for game apps.  Checked settings and sound is on.  Any suggestions.

    My volume controls work and getting sound for music but not for game apps.  I did check settings and sound is turned on under notifications and in the app.  Any help would be appreciated

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

  • Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

    Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

    Review my post here:
    http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
    And see if something similar will work for you.

  • Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

    all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
    So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

    or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
    iphone 4
    SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using  
    hope will never return. Thanks

    We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

    Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

    Troubleshooting MagSafe adapters  http://support.apple.com/kb/ts1713
    If you need to pursue further you can do it on-line,  start here
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • My iPad cannot connect to my internet.  the internet is working but not with my ipad.

    my iPad cannot connect to my internet.  the internet is working but not with my ipad.

    Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
    Hope you get up and running ASAP

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • HT4993 My volume down button is not working.  The UP button works, but not the down button.  I have tried to restart it and that didn't solve the problem.

    My volume down button doesn't work on my iPhone.  The UP buttown works, but not the down button.  I have tried a hard reset and that didn't fix it.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

    Exactly which password are you inputting? iCloud looks for your AppleID password.

  • Wake on Lan (works, but not always)

    Iam trying to get Wak on Lan working on my iMac. It works, but not always. When I put my mac to sleep en send the magic package, my mac turns back on. But when my mac turns to sleep and I wait a few hours (the next morning), my Mac doesn't respond to the same magic packag. When I wake up the Mac by hand, and put it back to sleep again, the magic package works again en turns the mac on.
    It almost looks like the mac goes into a deeper sleep mode after a few hours. Does anyone knows what could ben the reazon.

    mmm, It seems like my mac doesn't always turns to sleep mode. Most of the time it only turns off the screen (solid light). My energy settings are 10 minutes for the screen and 15 minutes for the mac. But after turning of the screen it never turns to sleepmode. Ecxept when I put it to sleep manualy.
    Strange thing is: when the screen is turned of, shouldn't I be able to get tot my files... (I can't actualy).

Maybe you are looking for

  • Using view criteria.

    Hi. I'm new to adf and my english is poor so be patient with me, thanks in advance for that. To build a serch form based on a view that was configured to use a bind variable I simply drop the Executewithparams operation and build a adf parameters for

  • In OpenScript, is there anyway to have an XML post pass if a 500 error is returned?

    Hello, We're using OpenScript 9.3.1.0 and are automating some Web Service tests.  One of the scenarios is to test when data is sent to the service where no valid session exists, we expect a 500 Interval Server error to be returned.  I have created a

  • Opening Another Form and other Qs

    I am very unfamiliar with Java, and could do with some help with the following : How do I call another form to open from an existing form, which is from a different file? How do I disable the 'Close', 'Maximize' and 'Minimize' buttons on the top righ

  • Code for SAVE functionality in FPM_OIF_COMPONENT

    Hi Experts, I have enhanced the component DPR_DET_DATA_PROJECT_O. The SAVE functionality for this component exists in FPM_OIF_COMPONENT. I have to raise error message depending on the custom fields added in  DPR_DET_DATA_PROJECT_O when I click on 'SA

  • The Zen Micro wired remote: Many raves, two small ra

    Just got my eagerly-anticipated white Zen Micro remote!! Here's my two cents: Pros: . Nice look that matches the design of the unit itself very well. 2. Definitely makes life easier in terms of controlling the unit while staying acti've. 3. Minimalis