My sound no longer works on my Apple 5c cell phone. What should the settings be?
My sound no longer works on my phone. What should the settings be?
What do you by "what should the settings be? Volume is either up or down.
Similar Messages
-
my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?
If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.
-
I cannot get any mic to work on this, internal or external. What are the settings?
evidently I must have shanged a setup file, but i am new to macs, an dnt know what i changed or what to change back, It was working fine, I was on a headset, then i played with it, turned the laptop off, when i turned it back on, no voice at all. I can hear things fine, but no mic. What setttings did I screw up?
Check SYSTEM PREFERENCES>SOUND>INPUT
Ciao. -
HT204266 The sound no longer works on my ipad?
The sound no longer works on my iPad although when I put headphones in it does. When I press the volume button it comes up as "sound effects" but with no dots that would normally go up or down. When I double click the start button there is the normal volume bit but no button to move up or down. Has anyone ever had this before?
The disappearing sound is typically one of three things that could be going on. Read this and see which one applies to your situation.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol. -
The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?
Try a reset first: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
If the reset doesn't fix it, try a restore:
http://support.apple.com/kb/HT1414 -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
Sound no longer working after graphics card installation
Okay, so my problem is:
I recently added a graphics card to my windows 8.1 PC. The card itself works fine (a GTX 750Ti), but since installing it my sound no longer works from either port. Things I have already tried:
Rebooting (obviously)
Taking the card out and then replacing it
Going through all the control panel audio settings (more on this later)
Disabling the HDMI audio on the card
Trying different (provably working) speakers and headphones
Updating/installing drivers (not that you need them for headphones)
The "playback devices" screen declared that nothing whatsoever is plugged in (it is). I'm concerned I might have damaged something during installation, but nothing seems obviously damaged, and I would have expected static to either do no damage
or wipe out the entire motherboard. The back port is working, so it isn't the cable. My monitor output is HDMI (with no speakers on the monitor), if that makes any difference.
Penny for anyone's thoughts?The back port is working, so it isn't the cable.
I’m confused as to what this means. If you have audio via the ports on the back of the computer but not in front ports you may have damaged the front audio cable or connection on the motherboard
or at the front ports. Find the HD Audio (or AC’97) port on your motherboard and verify that the cable is connected and intact, then follow this cable forward to your front audio ports. If you stressed this cable by tugging or pushing, it could have damaged
the connection to the front ports. Sometimes these ports are connected by a header like the motherboard and this connection could have come loose.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet -
My sound no longer works, my sound no longer works
Since i downloaded new OS my sound no longer works, this if for itunes, spotify and trying to listen to youtube videos
I just found out that a few of my slideshows have the music intact. For the rest, it looks like I will have to go through the cumbersome process of re-loading the music.
I can't tell is this was caused by the Mavericks upgrade or Iphoto Update. -
My iPhone no longer works with my wi-fi network. It detects the network but is unable to communicate, even though until today it worked great for months. The network is Verizon FiOS Internet on an M1424WR router. PCs and iPad continue to work with the same network without any problem. Any ideas?
have you upgraded to the new ios5 software? if so that could be the issue and contact apple.
-
My headphone jack no longer works. I just upgraded software and did all the iCloud install.
my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?
It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required. When I attempted to open it to download "Previous Versions" I could not. I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated.... Rich@
When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize. Please down load Adobe Support Advisor to detect the problem" I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available. I then go to that site and am told to go to CC for desktop apps, that requires me to download CC... I don't want CC.. just want to have my CS6 PS work again.... so frustrating...
-
I sprayed it a year ago i really like the keyboard and i really need it can it be recovered??? My apple wireless keyboard got wet a year ago i sprayed the cleaning spray on it some of the keys are working but some of the keys aren"t working. it got sprayed a year ago What should i do??? Can it be recovered plz tell?
There is almost no chance it can be recovered, except at a cost far greater than a new keyboard. Once wet, spraying with a cleaner will not do any good and most likely will make the situation worse.
Best thing at this point is go to your Apple store, or the on-line store, and buy a new keyboard. Water damage is not covered by the warranty or AppleCare. -
i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?
Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC -
my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
and i have to post sth importent on instagram tonight so its ergent please help....Greetings motahare,
After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D
Maybe you are looking for
-
Waiting for apple to deliver your itunes match results - time out -uk
Hi, Help me please I seem to be stuck in a loop that after the gathering of information has finished, the info is sent to apple and then I get 'waiting for apple to deliver your itunes match results' after about 30 or so seconds I then get an error m
-
Pro cs3 crashing constantly with extra audio
As described above; when putting another audio wavefile on the timeline [track 2] pro cs3 starts crashing [pc boots!] when moving along the timeline and using the ripple edit tool. Project doesn't want to open again afterwards... I use aspect hd to e
-
How to recover a Deleted Bookmark folder
After clicking on the "show all bookmarks" button in Safari, I selected the folder I wanted to delete (or thought I had), then went to the Edit Menu and chose Delete. Only later - once the Undo option had expired - did I realize it was the wrong fold
-
How to open pdfs directly in acrobat reader client side without using browser
When I sent a request to the pdf through servlet the requested pdf is coming in a browser , but I want it to open in acrobat reader only . Is it possible ?
-
Photosmart Plus B209a not printing yellow
My Photosmart Plus B209a doesn't seem to be printing yellow. First thought was a blockage, but having changed the cartridge as it was low anyway, it's still not printing yellow. Any thoughts? This question was solved. View Solution.