My sound output is not working.

When i don't have anything in my sound output plug, I hear sound. when I have it pluged it to my tv or my speakers it doesnt work. Please help!!

¿have you change the output in the SystemPreferences/Audio window?
It's seems you have active the Internal Speakers output

Similar Messages

The sound output does not work on my ipod

Hi There,
I have an Ipod 4 th generation and the sound output no longer works on any device. I've reset and reinstalled the software but nothing appears to work?
Any ideas please?
Serial number: 9C6463XJV9R
Thanks Chris

If none of the 5 R's helped address the issue, it's likely hardware related.
http://www.apple.com/support/ipod/five_rs/
As to what exactly is damaged/faulty, no there is no certain way to tell. It could be the iPod's audio chip or something else on the logic board.
Either way you'll need to have your iPod serviced/replaced either by Apple or a third party company.
B-rock

Sound output is not working

Hi!
The sound output of the PowerBook G4 I use at the office is not working now. When I had a look at the Preferences Pane, it says no Output Devices Found. Not even the built-in speakers.
Is there anything I can do, or should I take to some Technical Service?
Thanks

Welcome to the Apple discussions.
Try resetting PRAM http://support.apple.com/kb/HT1379 . This can sometimes fix sound problems.

Sound output jack not working

Hello everyone,
The internal speakers on my iMac still work, but when I plus in my external speakers through the output jack (which used to work nicely), I can only hear the internal speakers. I've restarted many times, un- and re-plugged many times. I've also made sure that the speakers work in my old iMac. Any suggestions?
Thanks!

cliveb74 wrote:
I've had this a few time with my imac, in fact two minutes ago. Move a headphone jack quickly in and out gently seems to clear any dirt from the connection and has always worked for me.
Good luck.
Its actually not removing anything, there is an internal switch on the macbook for the headphone port. If headphones are removed too quickly then the switch does not reset and it still believes headphones are connecting. If you move it quickly in and out you risk damaging that switch.

My sound system is not working after my last updates on my imac,what shall i do to get fixed?

Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????

apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

TS1574 optic digital port can't be shut off and the sound of speakers not working! what to do?

optic digital port can't be shut off and the sound of speakers not working! what to do?
this happened after taking out the head-phones. Now even after pressing CMD+ALT+P+R when booting - the sound of booting appeares BUT after the desktop is ready the sound doesn't work and sound buttons show the sign "circle with crossed line"

If there is a red light visible in the audio output port, the switch id stuck. Insert the earphone jack a few times. If that fails to trip the switch, try a toothpick or similar device and jiggle it inside the port. If that fails, try a shot or two of compressed air. If still no success, go to a repair facility.
Ciao.

Sound Speakers are not working! Not allowed to control the volume! Why?

Hello,
Digital Output is not working on my iMac PowerPC G5 with Tiger. Suddenly, sound disappear and I was not allowed to turn on the volume through the keyboard buttons; a "not allowed" icon confirms that.
First I thought It was because Perian, Quicktime plugins, libraries, etc as I have read searching on these forums but I have just installed Mac OS X from the default install disc after formatting but the problem is not solved!
Speakers do not work but headphones and airtunes do.
Did the iMac Sound Speakers die?
Help me, please!

Imac G5 OS10.5.3
I have the same problem but with a twist:
In system preferences:
Under sound:
Output selected:
Under name: Digital out
Under type: Built in audio
Below that : settings for selected device
It says:The selected device has no output controls
It won't let me adjust the audio up or down, no sound.
I can hear the chime when the computer comes on, though.

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

External sound system is not working

Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?

That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
Is it possible that the Jack on the sound system you are experiencing problems with is bad?
Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
Have you tried using this sound system on a different computer to see if the problem still exist?

I cannot get any sound..it says my sound card is not working properly...how do i fix this.

HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

My sound output is not working.

Similar Messages

Maybe you are looking for