My sounds have stopped working for text, YouTube and music

My sounds have stopped working for text, YouTube and music since in downloaded new software!

I'm not sure if this will help, but I went into my sounds setting and made sure that both the "vibrate on ring" and "vibrate on silent" were selected to "on."  Once I did this, I was able to get the vibrating notification for a call received (as this had previously not been the case).  Hope this helps.

Similar Messages

  • The sound doesn´t work for games, videos and music,

    the sound doesn´t work for games, videos and music, but it works if use my hearphones

    Hi mellidani,
    If you are having speaker issues with your iPhone, you may find the following article helpful:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    - Brenden

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • HT4628 After 7 months of flawless performance, my airport extreme has stopped working for my iphone and ipad.  Can anyone help, i am not very computer savey.

    After 7 months of flawless performance, my allpe airport extreme wi-fi stopped working for my iphone and ipad.  I am not very computer savey.  Can someome help me?
    Thank you,
    George N

    Do you mean that only your iPhone and iPad stopped working! while other devices (Pc, laptop, etc..) still works?

  • USB ports and sound have stopped working

    As the subject reads, all 3 of my USB ports have stopped working and all sound.  In the device manager I receive a (code 10) for realtek high definition audio.  I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
    Windows 7
    Toshiba Satellite
    L505D-S5983

    Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
    Sound devices, USB ports and SD card doesn't show up in the Device Manager.
    Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
    Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution.

  • 3G iPhone click sounds have stopped working.

    For no apparent reason, the keyboard click sounds (feedback) have stopped working. Sounds from other apps work fine (audio), as well as iPod music, etc., but anything which gives a click sound feedback has stopped. I performed a sync, as well as went through all settings that have anything to do with sound or audio and it hasn't helped. I hate the idea of having to do a complete reset and reinstallation and configuration of everything, but what are my choices?
    TIA

    Not really stupid, some people don't even know their computer is unplugged when they see a dark screen and call tech support right away:-)
    But, Yes, I did a sync, I toggled all settings, I turned it off, accessed all typing apps, etc. Sound everywhere else works, just not keyboard click sound feedback. I am left to wonder if the actual click sound file itself got hosed and needs to be reloaded if that is possible - it seems that one can't access systems sounds to find out.

  • Iphone 6 (Verizon,64GB,space gray)  microphone works for text dictation and Siri but stopped working for calls and voice memos.

    My iphone 6 the micorphone has stoppped working unless I speak loudly right into it and its still not clear during calls and voice memos. But it works just fine for Siri and text dictation. I use the earbuds for work so not sure how long its been going on. Only change is I updated to iOS 8.1.3. Not sure if I should exchange my phone or if its a software glitch since the same mic seems to work for some things and not others. Any ideas would be apreciated.
    iPhone 6
    Space Gray
    64GB
    Verizon

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Afew of my tools have stopped working for example the cloud tool and octagon tool they still show up but are opaque

    some of my tools have quite working. the cloud octagon and line tools. They have become opaque.

    Hi Dan,
    Please try the steps mentioned below and check if it helps.
    1) Open Acrobat
    2) Go to >View>Show Hide>toolbar item> uncheck the touch mode.
    Thanks,
    Vikrantt Singh

  • DV9999us Sound Hardware stopped working for no reason

    This is my first time ever posting to a thread, so if I do a poor job explaining myself, I apologize.
    I have an hp dv 9999US laptop which months ago I upgraded to Win7-64 Pro.
    I had no problems until a few weeks ago, where all of a sudden one day my sound card stopped responding. The soft touch keys above the keyboard became unresponsive and there was a red "x" next to the speaker icon in the taskbar. If I click on it, I get a "not responding/wait/close" dialogue box. And under Device manager I have no listing for a "Sound, video, and game controllers." Sometimes Device manager shows a device listed as "Co-Processor" with a yellow exclamation after it, but when I try to install a driver for it windows is unable to find one.
    Also, when I try and install the driver for my sound card ( when it's not detected in DM) i get a code 10 error that the hardware is not responsive, or something to that effect.
    However, sometimes everything works fine. The soft touch keys are responsive, my conexant sound card displays in Device manager, and the volume settings in the taskbar are functional.
    I have NO idea what is causing this, but I've tried just about every driver I can find that's compatible with my integrated sound card.
    I've done some forum reading, and one thing people suggest is to make sure that the Microsoft UAA bus driver, but I'm a little hesitant to start installing random drivers without knowing what they'll do.
    Any advice would be greatly appreciated, and any additional information you need will be almost instantly provided.
    Thank you in advance
    Mike

    Try a smple reset:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off).

  • Sound suddenly stopped working for HP Pavilion HPE h8xt

    It was working perfectly fine a few weeks ago; then last week it stopped working and I haven't gotten it to play any sound since. I'm using my old Emachines SP-20A speakers. I tried my headphones to make sure it wasn't a speaker problem, but no sound from there either. I didn't make any changes I can think of.
    I have already tried everything on this list, to no avail: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01884922&tmp_track_link=ot_faqs/top_issues/en_u...
    There are no error messages, nothing. Everything seems to be fine, but...
    I have a HP Pavilion HPE h8-1070t CTO Desktop PC and am running Windows 7 64-bit.
    I'm really at a loss here and I can't work without sound. Help would be very much appreciated!

    Hi,
    It would be helpful if you posted the exact HP product number.
    Think back to when your PC operated correctly and then when the sound failed.  Between those times, what changes or updates were made to your PC?
    You might look in the Control Panel --> Programs and features and look at the changes about the time when your sound failed.  In that same Control Panel --> Programs and features you can also look at installed updates and dates.
    Your PC is still under warranty so you might give HP Support a try.  You already probably know what they are going to tell you.
    HP's support number is 800-474-6836 or 800-HPINVENT or online here.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • CTRL+H and CTRL+B have stopped working for Firefox. Every other CTRL command works. What's wrong and how do I fix it?

    Whenever I want to open my history (CTRL+H) or my bookmarks (CTRL+B), I use those commands. They've always worked. Yesterday, they mysteriously stopped working. Every other CTRL+KEY command still works flawlessly.
    I haven't done anything out of the ordinary in the past few days, and I've already tried to restart my computer. What could be the cause of this?
    Thanks.

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • All of a sudden some of my sites have stopped working properly on Firefox and I have had to (reluctantly) go back to Internet Explorer to get them to work properly. Why??? Please help because I always prefer Firefox in all internet stuff

    The problem sites have always worked properly on Mozilla Firefox until 2 of them stopped giving full access. I reverted to (yuk) Internet Explorer to see if the problem was still there, but, surprisingly I had full access with both programes. I repeated the attempts a couple of times in Firefox but now have to use IE when I require proper access.
    Is the problem in a setting somewhere??
    Please help because I HATE IE
    Thanks & Regards

    [https://support.mozilla.org/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache Clear your browser cache].
    If needed, delete the site's cookies. <br />
    Right-click the page, choose View Page Info > Security > "View Cookies"

  • Hello. On my Macbook air late 2013 model I am having a problem where microsoft word for mac just stops working for soon reason and at the screen where the document should be is just gray and does not even display the document. Does anybody have a fix?

    Hello. On my MacBook Air late 2013 model I am having a problem with Microsoft office word for Mac where the window for the document becomes all gray and I can not see anything that I have typed or any menus for it and also windows will sometimes dissapear and I am having truble getting them back. If anyone has anyideas of what is going on or could even help me thank you.

    Glad that helped.
    As time goes by (months or years), keep your eyes on how long Microsoft continues to support Office 2011 for Mac.  Eventually you should consider Office 365 or Apple's Pages, Numbers, and Keynote.

  • Shortcuts stopped working for text messages after installing iOS 6. How do I fix this?

    Also emoji does not show up either. I have even restarted my phone. Reinstalled the App. Restarted my phone again

    on the pad, in settings, messages, turn it off.  alternately, identify the pad, in that same setting, with a different incoming 'receive at ' address, and delete the one that is already there, (that is most likely the same as what you have set on your phone)  I have a different receive at address on different devices for that same reason.

  • Satellite p55-A sounds just stops working when I listen to music or watch Netflix

    Every time I listen to music about 3 songs in the sound will mute. When I turn it back up it goes back to the setting I had it on and then a little later does it again. I tried restoring the computer, turning it on and off, and tried different settings but it's still the same.

    Good luck.  This is a problem for many individuals.  Please let me know if you find an answer.  I don't know why Toshiba won't provide a solution to so many people that have this problem.  

Maybe you are looking for

  • Get configuration from dead RV082?

    I really hope that there is a solution to this problem. I have an old RV082 that I suppose has failed. The red diag light on the front panel is lit and nothing works. I've already replaced the unit, so I don't really need to fix it. Here's my issue:

  • Php form mailer help

    I have this form that I got to work with my flash file. There is part of the php that should send an acknowledgement email and it seems to be not working. I am wondering if someone could explain what I am missing. I think I have everything working do

  • Error Message Installing Creator 2.1 on SUSE LINUX 9.1

    Hi, I'm new to LINUX, I tried to run the : creator-2_1-linux-ml.bin from the Root console and I got the following error message: Xlib: connection to ":0.0" refused by server Xlib: No protocol specified The installer is unable to run in graphical mode

  • Dual display bug

    seems to be a bug in the display preferences. if i use dual monitors, it does not extend desktop like it used to. you can only mirror the two displays

  • How to simplify/speed up Adobe reader

    Ever since updating Adobe reader is less functional, takes too long to attach a document or crashes It's easier to save the document open my email program and select insert and browse to it...... Opening a PDF and printing it take forever now. Why, w