My Space Shuts Safari down after log in

After I log in to my myspace page safari shuts down. Any suggestions on how to gain access to my page?

Hi osugirl66, and a warm welcome to the forums!
Have you tried Clearing the Caches in Safari?
Or better yet, get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.

Similar Messages

  • TS1884 How do you cope with a system that shuts itself down after a safe boot progress bar is completed?

    How do you resolve a problem with a system that shuts itself down after a safe reboot and when the progress bar is completed? Thanks.

    Thanks for you response - the honest answer is I don't know, not being particularly IT literate. I do know however that I'm running Maverick if that is of any help?
    I also tried the Command R route, along with holding some other keys as per the Apple troubleshooting guide, but no luck. My wife pointed out though that the system was running slowly over the last few days and we had quite a lot of the 'spinning beach ball' before being able to undertake tasks.
    Lastly, I inserted my start up disk bit as the system is unable to start I'm now unable to retrieve it. All-in-all a real pain.
    Appreciate any advice. Many thanks.
    Philip

  • Computer shuts itself down after about 30 seconds

    Ive had my computer since 2008 and it has ran perfectly fine untill a few moths ago where the fan just started making loud noises and just generally over working even when the computer isnt hot. Suddenly a month or two ago it started shutting itself down after about 10 minutes and it just got progressivly worse and it wont even get too the start up screen. Is there any idea on what causes this or how i can fix it because I really dont have the money too purchase a new computer and it would save ALOT of hassle too get it repaired,
    Thanks, Jack

    This is usually a sign that your headphones are not plugged all the way in.  Make sure you cannot see any silver still showing from the headphone's plug.  It may require a little extra force to get the headphones to become fully inserted.  You should hear a sort of clicking noise indicating that they have been fully seated.
    Also check the headphone port from a damage or debris.
    B-rock

  • MBP shut itself down after plugging in usb and won't do anything now! Help!

    MBP shut itself down after plugging in usb and won't do anything now! Help!
    it turns out the was a loose connection under the sleeve and the iphone end of the cable! can i do a reset or something?
    thanks for any help in advance

    If you cannot find a solution in this comprehensive document, make an appointment at an Apple genius bar for a free diagnosis.
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Brand new pro shuts itself down after 30 seconds

    Help please!
    I bought Mac Pro two months ago and have used it mainly for pages, internet browsing and watching movies from my external hard drive. Since I've had it, it has gone to sleep (black screen) after just a few minutes of not touching the keyboard and takes almost a minute to wake up again when i try to rouse it by touching a key or space bar or use mousepad - really annoying if writing or presenting a lecture!
    Now, it shuts itself down about 30 seconds after switching it back on again. It opens up to a black screen with the Apple loading sign, the browser appears with 'chrome wasn't shut down properly' and then the computer switches itself off again.  I can't get it to stay on long enough to check any settings. It's only two months old and has maximum storage.
    I didnt purchase any additional virus software - could it be a virus? Or just a faulty machine?
    Also - I bought it in the US with extended warranty but no additional insurance.. I live in the uk but am currently in India and so cant take it to an apple store. Am I covered with warranty?
    Thanks.

    - could it be a virus?
    No.
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • Adobe Photoshop CS2 shuts itself down after printing..

    Not sure whether I'm in the right place to post this..
    In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
    The Photoshop CS2 is version 9.0
    I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
    It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
    is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
    Regards,
    Meru
    iMacs Mac OS X (10.4.8)
    eMacs, iBook G4s Mac OS X (10.3.9)

    Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

  • Iphone 4 will not power up. shut itself down after recording video and attemptimg to send via mms.

    Iphone 4 shut itself down about 10 hours ago after I recorded a new video and attempted to send the video via mms.  Tried many times to power up using standard power up procedures.  I noticed that it seemed to be getting hot.  I removed the protective cover and the actual phone was very warm.  even after 2 hours it appeared to be overheating.  has not been dropped or gotten wet.  any solutions?  has this happened to anyone else before?

    Hmmm, press and hold (about 10sec) the Home and Power button until you see the Apple logo. That restarts your iPhone and should fix your problem.

  • Seeking a way to shut mac down after backup -- and trying to save power!

    This might take a while, but please bear with me...
    I have a network of approx 10 macs which are backed up by EMC Retrospect. Under previous versions of retrospect which ran under system 9 and earlier, you could shut a mac down, it would go to sleep, then when the backup was finished it would sut the mac down. This no longer works on OS10.x so we have to leave all the macs on all night to ensure the backup is completed which is a terrible waste of power. So, my question is, is there some way -- a script perhaps -- to make a mac shut down after an event (eg. after Retrospect has backed up its contents) to prevent us having to run all the computers all night?
    thanks
    Luke

    In Applescript, you can still shut down the computer, so there is no reason Retrospect could not run a script to shut down the Mac after completing. You might want to ask them why they dropped the capability.
    You could write an applescript that starts Retrospect, and then periodically checks to see if it is still in the process list. If not, it calls System Events to shut down. You should probably post that question over in the [Applescript|http://discussions.apple.com/forum.jspa?forumID=724] forum.

  • HT5137 How do I stop an app or shut it down after I'm done using it?

    After I'm done with an app, how do I shut it down?

    Close apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • Help! Oracle down after log seq# reached 65535... (urgent)

    I'm using Oracle 8.0.5 on Linux, I've got an error message saying the LGWR process not functioning, and the instance go down!
    After checking v$log, I found that the log seq# reached 65535 in the online redo log and a meesage in the alert file saying 65535 is the max. value and can not be extended....
    Is there anyway to reset the log seq#??
    And any solution for this problem?
    null

    Here is the official solution:
    Solution Description:
    =====================
    The problem has been fixed in Releases 8.0.6 and 8.1.3 and higher. The
    workaround is to recreate the control file with a smaller maxloghistory value.
    If "MAXLOGHISTORY" is 65535, then when the log sequence number reaches 65535,
    LGWR dies.
    Solution Explanation:
    =====================
    "MAXLOGHISTORY" is one of the database settings specified in CREATE DATABASE
    statement. It is the number of redo log files about which the control file can
    keep information. This value determines how much space in the control file to
    allocate for the names of the archive redo logs files.
    The default value is operating system dependent. However, we have seen it
    default to 65535 on certain platforms. You need to set it to an appropriate
    value which is sufficient for automatic media recovery of the database.
    You must recreate the control file when you want to change "MAXLOGHISTORY"
    value.

  • Shutting itself down after short start up

    Tiger 10.4.9... G5 iMac (non-intel)gray screen comes up for about 30 seconds then shuts down. Breaker was shut off without turning computer off which has caused this behavior.
    In the past, I mounted the computer as a Target drive on the desktop of another computer, ran Disk Warrior on a partition and everything was fine.
    This time, however it didn't work. I tried running the Disk Aid from the desktop of the other hd, but it couldn't complete due to some service error.
    Is there a unix command for some type of repairing permissions I can try from a command line prompt with a Target drive?
    I wouldn't know the correct syntax/path.

    Does Avast put a toolbar into the browser window? Maybe if you removed that, it would help? Why should an antivirus add toolbars into browsers anyway?
    Does the crashing happen if you are in Firefox safe mode?

  • Black screen with white rolling back continuosly. I can shut it down after holding buttons for 45 seconds but when I turn it back on it starts again.

    I am trying to save my pictures on my PC so I can get the iOS7 upgrade. I plugged it in to my computer to do so and my screen is black with the white rolling ball. I can reset after holdign home and off for 45 seconds btu when I turn it on the same thgin. I cannot shut it off. How do I get this tos top so i can move forward?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Slow down after logging out then in again?

    Has anyone been having problems with OS X getting pretty slow/choppy/having programs not respond when you open them after you cycle a login? Kind of irritating, but a restart fixes it. (I'm on a base Core i5 Macbook Pro, purchased couple days ago).

    bump

  • Adobe flash player download stops and asks me to close safari, i have shut safari down but it still won't complete and install

    I'm trying to download adobe flash player for my IMac so I can watch vidios on you tube. It gets half way through the install and then it stops and asks me to turn off safari, I close safari and press continue but it pops up again. Please help. Regards Nick

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts. 
        Click "Safari" in the menubar and select “Quit Safari”.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • NASA TV shuts Safari down

    Safari 5.0.3 and OmniWeb (basically a Safari-based browser, from what I can tell) both "vanish" when I go to watch NASA TV (www.nasa.org/ntv). No "crash report" window pops up. Safari simply ... quits.
    The only other time I've seen anything like this happen is when I open a WMV file (I believe). Simply can't be done, for some reason.
    Anyone else having trouble watching NASA tv?

    http://www.nasa.gov/multimedia/nasatv/index.html click on QuickTime link, downloads a file, and it plays for me, in QuickTime Player.

Maybe you are looking for