My speaker systems are not working help me please

i have a speaker systems sbs vivid 80 they look ok the light is on when i swich them on but they are not working

Try testing the speaker on another audio source and see if it works.
Jason

Similar Messages

My z10 speakers are not working help me please

Hello
I bought the BB Z10 last week and after 5 days i found that the speakers are not working ,i have tried everything such taking the batter,restart,format etc
i have found so many people have the same situiation that i ave with my bb
what should i do ??

Hello Doss188.
Do not reboot the Z10 or tried to get the battery for a minute to see if it works?
Regards.
Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
@ gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
i updated my ipad in ios 6

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

Please turn off your caps lock.
See http://support.apple.com/kb/HT1212.

Interactive ALV not working - help me please

Hi all,
This is my first time here and I hope somebody could help me out with this.
I have created an interactive ALV report in OOP. I have screen 1000 which contains the selection screen, and 2 custom controls. What I wanted to do is that when I select from the screen, data will be populated on the 1st ALV. Then when I double click on any item on my 1st ALV, it will do another selection and data will be displayed on the 2nd ALV (while 1st ALV contents remain). And when I double click on any item on the second ALV, it will call a transaction.
Quite complex. But the event for my 2nd ALV is working, it's able to call a transaction. What puzzling me now is the event on my 1st ALV. Data selection is okay, but data are not populated on my 2nd ALV. It only shows data in the 1st ALV. Somebody please help!

Hey Ayem...
There is a other place to post your thread.
Expert forums -> ABAP development -> UI Programming or ABAP general
link: User Interface Development in ABAP
All the best,
Thanks,
Naveen.I

My port's are not working right! Please help!

I am running a Linksys Wireless G 2.4 GHz Broadband Router Model WRT54G. I am unable to open any ports. I upgraded to the latest firmware yesterday but still am unable to open any ports. I even turned off my Symantec Internet Security Suite Firewall but still am unable to open any ports. What else can I do to fix this? Also, when i did this a couple months ago, it worked just fine!
Please Help!
Thanks!

if you've tried different headphones that you're sure work properly but are all experiencing the same issues on only your ipod then i would recommend that you send the ipod back for repairs as it is still Covered by the warranty.

Apple Configurator Device Backup Not Working - HELP ASAP Please

Hey Everyone!
We are trying to backup one iPad so we can take that backup and add it to all of our other iPads....
In Apple Configurator I've added all of the apps, setup a profile, etc.
On PREPARE, At the top I go to DEVICES and click on BACKUP. It gets to the "archiving" part of step 1 of 2 and I receive a popup saying "Could Not Create a backup. The device was disconnected... check the usb connection to this device".
I'm going to assume this has nothing to do with my USB connection as I've tried several ports and several cables.
We really need to get this backup and restore it onto all of our ipads as soon as possible.
This is our first time using apple configurator!
Thanks so much!
Any help would be greatly appreciated!!!

Let's get your iPhone back up and running reeset12! My first recommendation is to try a soft reset by holding down the power and home keys. If the device doesn't respond, I recommend connecting it to a computer via the usb cable. If you are unable to get past the logo screen in either case, I recommend a hands on evaluation at a store location.
http://bit.ly/3SdsA
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

HT201210 my newly brought iphone 6 is not working help me please!

i connected my newly bought iphone to itunes and press update then suddenly it prompts me that it can be updated i needed to restore so i restore it and again it alerts me that it can't be restored. what will i do?

You likely have some security software (e.g., firewall) getting in the way.
Resolve issues between iTunes and security software - Apple Support

The speaker of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

Hi talero,
Contact AppleCare or bring it into an Apple Store or AASP.

Hp Pavilion g6-1152ex Laptop Speaker are not working.

HP Pavilion g6-1152ex
Wnidows 7 32bite
The left side speaker (Only the left side) of my laptop is working intermetently. Sometimes it's working, sometimes not. When I tried to tap hard the laptop near the left speaker, sometimes it work but a crackling sound or not clear sound is coming. Should I replace the speaker or a wire inside is loose?
This question was solved.
View Solution.

Hello Rick_of_Jonghap,
I understand that the speakers on your notebook computer are not working properly, and I would be happy to assist you in this matter!
To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 7). This should help with the playback on your system.
In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
For more assistance, I will need to know:
1. If your computer has completed all of its important Windows Updates.
2. If you have updated your HP drivers using the HP Support Assistant.
3. If this is an on-going, or recent issue.
4. If plugging in headphones produce the same problem.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

My MacBookPro is continuously buzzing, the backlights are not working although it should be on. Tried to cover the sensor, but it's not that. Also, it's telling me that I have no batteries and the charging is not working either.... Any help? PLEASE!!!!

Intel-based Macs: Resetting the System Management Controller (SMC)

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4623 Hi there, yesterday I updated Facebook and Viber. They are not working,Viber shows waiting and when try to launch Facebook all I get is a BLACK page. Help please

Hi there,
yesterday I updated Facebook and Viber, they are not working.
When I launch Facebook all I'm getting is a BLACK page and Viber is highlighted in grey and showing "waiting".
Help Please Please Please

Hello rulawa,
You may want to take a look at some of the standard troubleshooting steps for App Store apps found in the article below.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Hope that helps,
- Griff W.

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

What version of Mac OS X?
What home page?
What browser?

My speaker systems are not working help me please

Similar Messages

Maybe you are looking for