My Speakers sometimes not working

Hi, i purchased HPPavilion G6 laptop just 5-6 months back and since that time I am facing non-recurring problem with Audio whenever I use to play something online or using multimedia softwares. But I am unable to check reason for this as it's sometimes working perfectly and sometimes it doesn't and i usually restart and when relog-in it works!
Does anyone knows reason? As I have already checked it's drivers are working perfectly.

Hi Cancer1985,
I understand you are having issue with the speakers not working all the time. I was wondering if the next time it happens see if you can play music. Some sites do have issues with sound. If you have checked your drivers and all is well, I think it is with the sites. Here is a link on tips for fixing common sound problems.
http://windows.microsoft.com/en-ca/windows/tips-fixing-common-sound-problems#tips-fixing-common-soun...
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

All Speakers Suddenly Not Working!

Everything was fine until yesterday and I didn't do anything to the phone that might have caused this. I suddenly noticed that the speakers do not work, but through the headphones music will play. I can talk to people on the phone too, just not hear the phone ringing. The strangest part is, if I record something with the mic, it will play back! So the speakers work then.
I read online that this might be due to the iPhone still thinking the headphones are plugged in - I had had the headphones plugged in yesterday so I thought that was the problem, I tried plugging them in and out several times as people suggested with no results, I tried soft resetting twice, nothing... I then tried charging it as a last resort and realized if I mess around with the way the iPhone is plugged in (the angle), the sound will work, or at least cut in and out & fade in and out. Sometimes if I pull the USB in and out enough times, the sound will work when not plugged in... but of course that is very temporary solution - until I plug it back in to the charger. I am sure that isn't good for the phone either.
Does anyone know what has gone wrong? Is it a hardware issue? I don't have a warranty anymore. If I hard reset will it be fixed? And, if I hard reset, will I lose game data from apps, like Angry Birds and Inotia 2? I really don't want to lose that game info and I last backed up my iPhone quite some time ago; back when I downloaded Intoia 2.
I would greatly appreciate any help.
Message was edited by: Shiranai

As far as I can see, it's random. Everything. Nothing makes any sense!
A the moment, the iPhone is playing music with the SIM card, but without anything plugged into it, but it's occasionally fading in and out.
Oh, and I doubt this is related, but about two months ago the iPhone failed to show that the battery was draining - it was stuck at 100%. This went on for a few days, it wouldn't even warn me at the 20% mark, it would just shut off. This happened for at least three full charges - I remember at one point it suddenly started working again at about the 70% mark, I'm not sure if it was alright after that or if it went glitchy on the next charge... but in any case, the problem mysteriously never reappeared after those few days.
Message was edited by: Shiranai

My laptop speakers are not working properly so wanted to visit service centers of hp in london

from yesterday night my laptop HP pavilion g6 speakers are not working properly. out of many only one speaker is working so i want to visit authorized service centers so that i can fix the issue.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56460.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has had any effect on the audio issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

[LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
See the above post for more information - here's a synopsis:
CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
Any ideas?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

X. wrote:
Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
Any news on that?
@mellroth figured out the solution :-)
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

My speakers are not working properly.

my speakers are not working properly.the speaker dosent work with music and the keypad clicks,but speakers work fine with siri and voice memos even the speakers work fine with ringtones .how is it possible?

"Speakers" - there is only one speaker on iPhones
Restart the phone.

My speakers are not working but it still makes a sound when it boots up

my speakers are not working but it still makes a sound when it boots up.

Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article.
2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
3. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
4. Reset the NVRAM.
5. Reset the SMC.
6. Reinstall OS X after backing up all data.
7. Make a "Genius" appointment at an Apple Store.

I just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

hi i just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

thanks for the information about speakers. and i mean the battery back up the battery i always getting lower even im not use. and can u pls tell me how to check this as a brand new or not. b'coz in the store they gave me replacement phone without boxing. the phone was coverd by wrap and they never give any receipt for this

Pavilion a6303w speakers are not working

After having to completely remove all files from my computer, due to mechanic systems program. I reinstalled my computer to it's factory settings. I am unable to download my backup disks as well as my speakers are not working. I have checked the Audio and everything is up? Can anyone help me with how to get my audio back?

When you say "I checked the Audio and everything is up", does that mean that you checked all of the settings in the Control Panel/Sound module? You should assure that you sound device is set as the default. Also, check all of the settings one by one to assure that they are checked properly. Then, update the driver.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Mark debug 'sometimes' not working

I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
I'm using Vivado 2014.4. "Flatten" is set to "None". The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH. But when synthesis gets done with them, the names are completely different.
I don't care if the "equivalent" nets are still there. I need the names. Every time synthesis runs, it's a crapshoot whether the names will change. Particularly bad are 500+ bit buses that get exploded into individual signals. I don't have the time to regather them into the proper buses every time.
In general, I've been pleased with the changes in Viviado. But I can't believe how badly a wonderful tool like ChipScope has been screwed up.

Output speakers do not work, have a red light coming out of my headph. jack

My headphone jack works but theres a red light coming out of my headphone jack when its unplugged and my internal speakers will not work...anybody have an idea? Tried system preferences and says no options for selected audio and cant get any sound for my built in output speakers and my volume display in my bar is faded....HELP!

@Spencer
I know this thread was marked answered but thought I should chime in since my MBP (2.66Ghz Late '08, bought May '09) started to exhibit this behavior. I was getting "No Output" greyed out speaker images and the red light coming out from the headphone jack. It's been intermittent but finally wouldn't go away so I figured I'd contact Appe.
This afternoon I called Applecare and was advised to take it to the Apple store... no questions asked, no troubleshooting steps, just told me to take it to the store and even offered to make me an appt. I was able to get an appointment at the genius bar same day (literally 2 hours after I hung up the phone). My wife took a ride with me and we headed down there.
When I showed the technician she tested it and then went to the back room to double check something. When she came back she told me that it was hardware related and needed to be sent in for service. I am under warranty so it was no skin off my back but I will need to be without the machine for a few days.
I agree with Rod to take it in, esp. if you're still under warranty. I should also mention that this only started happening a few weeks ago but the red light part was rather sudden.
Good luck!

HT201401 Speakers will not work after updating iPhone 4 to iOS. Apple Store said there are no speakers available which will work with the iOS6. Does anyone know where to get speakers which will work with iOS6?

After updating my iPhone4 to iOS6 my speakers do not work. The Apple store after troubleshooting said that none of the speakers they sell will work with iOS6. Does anyone have any suggestions for obtaining speakers which will work with iOS6?

That's a bunch of hogwash. My 4S is running iOS 6 and works with all my external speakers, both at home and at work.

Macbook Pro 17" - My built in speakers are not working.

Macbook Pro 17"
My built in speakers are not working.
The speaker logo is not highlighted (grey not Black) and when in sound options "output" pane only displays the digital out for 'optical' - ie, the internal speakers dont register (headphone socket works)
Any ideas?

1. If red light is visible in the headphone port, plug the headphone into and out of the port 5 or 6 times
     to flip the microswitch inside the port. Hopefully that will make the mode revert back to analog from digital.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.   http://support.apple.com/kb/HT3964
     Choose the appropriate method.
Hope any one of these steps helps.

My ipod speakers are not working unless I have my headphones plugged in?

So I accidently dropped my ipod in the toilet:( i immediently turned it off and put it in a bag of rice. When i came to get it out of the bag i noticed that my speakers were not working and when i turn up the volume it says i have my headphones in, and when i plug my headphones in the speakers work fine. I found out that there was some rice lodged in the headphone jack but i got it out with a needle and my ipod still thanks the headphones are in? I dont know what else to do, Please Help!!

Have you tried the standard fixes to rule out a software problem:
- Reset. Nothing will be lost
FIX for iPod Touch Home Button: Apple Support Communities
- Restore from backup
- Restore to factory defaults/new iPod.
If still a problem you have a hardware problem. It could be the headphone jact or something else.

My Speakers sometimes not working

Similar Messages

Maybe you are looking for