My Spry Menu doesnt want to work. Please help!!!!!

Hi,
My website is www.jumpingbeanpartyrental.com my navigation menu after I uploaded my files to my server are vertical using bullets, its supposed to be horizontal. I found the post below:
"First download the spry updater I pointed you to, close dreamweaver and open the adobe extension manager. Select dreamweaver in the extension manager, then select install from the menu options, navigate to the spry updater extension and select this, then select o/k to all on-screen prompts.
Once the spry updater is installed open dreamweaver. Open the html page with the spry menu and delete the 'old' css file, select the spry updater from the Site menu item, (main dw menu) select the item for the spry menu, and click on update.
Upload the html file and all your spry assets to your server."
I downloaded the spry updater, but when I open dreamweaver my spry updater from the Site menu is not active. So i cant click on update. I dont know what to do.............. Please help.......... Im not an expert on these, if you know the answer to my problem,PLEASE give me step by step answer.
Thanks in advance,
V

Hi again,
Like you know I have been trying to fix my website (navigation bar). Somebody fixed the navigation bar through FTP, a few days after he did it I had to made some changes to my website (using dreamweaver and then uploading my files to godaddy), after the uploading I checked my website and the pages that I made the changes where all messed up like at the beginning. Rentals, Packages and a few others are with that issue.
Dont know if you can help me with this, like i said in my earlier messages Im not an expert.
I appreaciate anything you can do for me.
again my website is www.jumpingbeanpartyrental.com
Thanks again,
V

Similar Messages

Spry Menu rendering improperly in Firefox - PLEASE HELP

Hello:
I have searched the forums and the web and can't find the
solution to the following problem.
I have a vertical spray menu with flyouts (CS3). Works great
in IE, in Firefox, the flyouts go to the far right of the page.
They used to be OFF the page, but I fixed that, I just can't figure
out the final fix.
Can someone please help? TIA!
URL:
http://www.yourhonor.com
Code for Menu bar:
@charset "UTF-8";
/* SpryMenuBarVertical.css - Revision: Spry Preview Release
1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights
reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box
with no margin or padding */
ul.MenuBarVertical
margin: 0;
padding: 0;
list-style-type: none;
font-size: 85%;
cursor: default;
width: 130px;
font-family: Arial, Helvetica, sans-serif;
text-align: left;
font-weight: bold;
/* Set the active Menu Bar with this class, currently setting
z-index to accomodate IE rendering bug:
http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html
ul.MenuBarActive
z-index: 1000;
background-image: url(../images/Images/ButtonMaroon.png);
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
width: 130px;
/* Submenus should appear slightly overlapping to the right
(95%) and up (-5%) with a higher z-index, but they are initially
off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
margin: -5% 0 0 95%;
padding: 0;
list-style-type: none;
font-size: 85%;
position: absolute;
z-index: 1020;
cursor: default;
width: 130px;
font-family: Arial, Helvetica, sans-serif;
left: -1000em;
/* Submenu that is showing with class designation
MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen
ul.MenuBarVertical ul.MenuBarSubmenuVisible
left: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
border: 1px solid #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text
decoration */
ul.MenuBarVertical a
display: block;
cursor: pointer;
padding: 0.5em 0.5em;
color: #000000;
text-decoration: none;
background-image: url(../images/ButtonGold.png);
/* Menu items that have mouse over or focus have a blue
background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
color: #663300;
background-image: url(../images/ButtonBronze.png);
/* Menu items that are open with submenus are set to
MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical
a.MenuBarItemSubmenuHover, ul.MenuBarVertical
a.MenuBarSubmenuVisible
color: #660000;
SUBMENU INDICATION: styles if there is a submenu under a
given menu item
/* Menu items that have a submenu have the class designation
MenuBarItemSubmenu and are set to use a background image positioned
on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
background-image: url(../images/ButtonGold.png);
background-repeat: repeat-y;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class
designation MenuBarItemSubmenuHover and are set to use a "hover"
background image positioned on the far left (95%) and centered
vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
background-image: url(../images/ButtonBronze.png);
background-repeat: repeat-y;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless
you are an expert
/* HACK FOR IE: to make sure the sub menus show above form
controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the
slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarVertical li.MenuBarItemIE
f\loat: left;
display: inline;
width: 130px;

Hi,
You have made too many changes to the original stylesheet.
Please have a look at my remarks here.
I hope this helps.
Ben

Spry menu bar....please help I have no hair left

Hi,
I am the sucker that is running a web site for a non profit
organization. I am learning as I go. I have a spry menu bar that
looks the way I want in FF and IE7. In IE6 the text is there on the
main menu but they are clear or the same color as the background
and the sub menus expand out of location. I have upgraded to the
newest spry version. I have tried fixing the location with %,
percent and ems with no change in IE6. Here is the site.
http://www.mainearchery.org/
Thanks for any Help

Your Spry menu bar is on http://www.fumiosawafineart.com/ but it is unstyled.
That's because the code for styling the Spry menu in http://www.fumiosawafineart.com/ is pointing to your local hard drive (file:////Mac.... which no-one can see but you)
<script src="file:///Macintosh HD 3/Dreamwever/HPGLLP/SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="file:///Macintosh HD 3/Dreamwever/HPGLLP/SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="file:///Macintosh HD 3/Dreamwever/HPGLLP/SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
Should read
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
The reason for this weird code is often because you have not defined a sitre correctly in Dreamweaver. Is that the case?

HT201593 Hello, my music doesnt want to sync please help??

I use a iPhone 5s its a 32GB, i cant sync my music on the device from a windows computer. its shows on the below Spare bar but doesn't show in the device.
I have tried lots of things please help.

Hi if your music is in the iCloud you can just sync over wifi i don't, use my pc since ios 7 you can do almost everthing over Wifi I have not used, pc for over a year. Cheers Brian

Wireless not working , please help .

well ive been having this problem for a while with my linksysE2000 for a while . it wont let my ps3 connected wireless and when it does it stays for a while then it disconnnect after 1 hours . sometimes my wife is strong and stay for a whole day and then othere sdays my wifi doesnt even want to work please help what should i do ?

So the main concern is only with the wireless connection? You might need to adjust some wireless settings in the router.
Please check this link to see if this will help:
List of common issues with Linksys wireless-N routers

HT204204 i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my data

hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my data

What is the exact text of the message you got? And did you not back up before you updated?

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

HT201263 my ipad stil doesnt want to work after i did all the steps

my ipad doesnt want to work i forgot my password and all it does is ipad dissabled connect to itunes!!

Could use some more info.
What version itunes are you using? (update to latest version)
Are trying to sync via a mac or pc? (what version OS is on pc)
When you connect ipad to computer, then open itunes what happens? Do do see the pop-up message that reads: 'itunes has detected an ipad in recovery mode.....?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding Passcodes
If you have forgotten the restrictions passcode
http://support.apple.com/kb/HT4213

My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.
I am using wifi from a mobile by using the tethering option.

Hi there amalrockzz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Additional Information
Find information on connecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings for configuring your Wi-Fi router for use with iOS devices.
-Griff W.

My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!

Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me

my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me

Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped

Hp DV6 TouchPad Lock Button Not Working Please Help.?

I just bought my hp dv6 6c4se entertainment notebook. but the touchpad on and off button is not working.please help.yes there is a little white sqaure in the left up corner of the touchpad.but it doesnt work.please help somebody

Try a Hard Reset to gently "kick" that TouchPad back into operation.
HP Notebook PCs - Use a Forced Reset to Resolve Hardware and Software Issues on Notebook with a Seal...
Removable Battery:
HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
Kind Regards,
Dragon-Fur

I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

My Spry Menu doesnt want to work. Please help!!!!!

Similar Messages

Maybe you are looking for