My sql+ windows shuts down autmatically and cannot login why?

Hi there,
the SQL+ window automatically closes. After reopening it, i cannot login, gives the follwoing error:
ORA-12541: TNS:NO LISTENER
why this happense? How i fix this?

here what says on the command window:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Production
Start Date 21-MAY-2008 03:55:34
Uptime 0 days 2 hr. 14 min. 1 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File E:\oracle\ora81\network\admin\listener.ora
Listener Log File E:\oracle\ora81\network\log\listener.log
Services Summary...
Ora8i has 1 service handler(s)
PLSExtProc has 1 service handler(s)
The command completed successfully
i also ran the start command. But still gives the same problem!.
I cannot remember what i did to close the SQL window but i'm sure it happened
when i used ALT+TAB to switch between windows.
Anyway i can login if i reboot my PC. But i can't reboot every time this happense.
SO please help me to solve the problem?
Thanks!

Similar Messages

Windows Shuts Down Suddenly and Restarts Again on HP 2000 notebook pc

hp 2000 notebook pc-C2M21UA#ABA
WINDOWS 8
STARTS OCCURING AFTER INSTALLING WINDOWS

Run a hard drive diagnostic. Tap F2 as you power up and look for the hard drive test. Run it and report results back.

I am ready to throw my computer out the window! I loaded the latest safari to and now at random pages will freeze. I can see what is going on, but cannot type anywhere! I have to shut down safari and go back in to even attempt to do anything. Please help!

Please help! I updated safari and yes it is an older desktop, but now all of the sudden tabs I have open will freeze on me. I can see what is going on, but am unable to type anywhere on the page! I have to shut down safari and then open up a whole new window to even attempt to get it to stop! It is driving me insane not to mention I need my desktop to work properly. I beg for someone to help me with this.

Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069

I have Windows 7. When I try to print an album cover on a CD I burned, I get an error message that there is a problem and it shuts down iTunes and says will notify me once the problem is fixed

I have iTunes version 11.3.1.2 and a Windows 7 Professional aith Service Pack 1. When I try to print a CD cover from a disc I burned, I get an error message that stops the printing task and shuts down iTunes and tells me once the problem is found they will notify me. When this happened before I got sent a message from Apple that I needed to install a new verion of iTunes. I believe I now have the latest iTunes version. So why can't I print?
Is this the problem below? Does the graphics driver cause the problem?
Solve a problem with NVIDIA Graphics Driver
NVIDIA Graphics Driver has stopped working properly.
A driver update, if available, might prevent this problem from recurring.

Try a different media. I have good luck using Maxell discs.

SQL Developer shuts down

Installed a fresh copy of SQL Developer with JDK. I successfully open it and am able to test the connection from connection set up screen. After clicking on a plus next to a connection icon my SQL Developer shuts down. I can successfully navigate a DB from SQL Plus.
Any help will be greatly appreciated.

found the solution to this problem in another thread. Credit to jayantp. Thanks.
jayantp
Posts: 51
Registered: 1/4/99
Re: SQL Developer 1.1 : cannot connect to 9.2.0.7 database
Posted: Dec 8, 2006 1:17 PM in response to: jayantp Reply
After wating for a while, I downloaded 3rd evaluation release(1.1.0.22.71). Still same issue. But this time, I got it working by copying
ojdbc14.jar and
ojdbs14dms.jar
into sqldeveloper\jdbc\lib directory from 10.2 client jdbc/lib directory.
With this, now the SQLDeveloper doesnot crash, and I can continue working.
Hopefully, in next evaluation release, the error gets fixed, because, I donot know, while this copying files fixed the crashing error, what other side-effect it will cause?

Windows shuts down Premier Elements 9 randomly

I have a more than adequate Windows 7 based computer. My hard drive died before Christmas and I had to reinstall the software. I created a new project with captured video and added some background music. Did not save often unfortunately and lost it all when windows shut down the program. Recreated it from scratch, saving often and still had occasional shut downs while creating the project. It's only about a 30min video with some added sound tracks and a few title screens. Now, when trying to make a DVD, it gets through Encoding 4 Menus and will begin encoding media. Sometimes makes it 7% sometimes 80% and then windows message says program has stopped working, shutting down. I see progress bar was still moving just seconds before the shutdown. Tried to convert to an MPEG and save on my computer instead and got the same shutdown notice. I just saw the FFDShow codec note and have not checked to see if that is on my computer or not. Would deleting this folder potentially solve this? Forgot to mention, Premier Elements is on non partitioned C drive with 100+GIG free space, save location is on a partitioned drive F with 300+GIG free space.

Is there an update link for Premier 9? I saw one come through this morning for 9.0.3 but the one in your "Hangs UP" thread is only for 9.0.1. Tried to update to 9.0.3 but would not connect to Adobe server this morning.
Date: Tue, 8 Jan 2013 07:59:26 -0700
From: [email protected]
To: [email protected]
Subject: Windows shuts down Premier Elements 9 randomly
Re: Windows shuts down Premier Elements 9 randomly created by Bill Hunt in Premiere Elements - View the full discussion
This first thing that I would do is to gather more information, and post it to this thread. See this article on the types of info, that would be so useful: http://forums.adobe.com/message/3220274#3220274
Also, take a look at this FAQ Entry, on PrE Hanging & Crashing: http://forums.adobe.com/thread/792580?tstart=0
Good luck, and let us know a bit more, please.
Hunt
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4976992#4976992
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4976992#4976992
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4976992#4976992. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Shut down scripts and command is this possible in OS X

In OS 9 it was possible to install things like Apple Script in the ‘Shut Down’ folder and these would be executed when the computer was told shut down.
Is there such a possibility in OS X? I have some script I would like to be executed when the user hits shut down.
Thanks

V.K. wrote:
you can make a logout hook. see these [instructions|http://docs.info.apple.com/article.html?artnum=301446]. change login hook to logout hook in them.
OK V.K., I think I am getting in over my head.
in the article is says find this line in the ttys document:
+#console "/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow" vt100 on secure window=/System/Library/CoreServices/WindowServer onoption="/usr/libexec/getty std.9600"+
Mine says:
+#console "/usr/libexec/getty std.57600" vt100 on secure
console "/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow" vt100 on secure onoption="/usr/libexec/getty std.9600"+
So not sure how to make the changes it suggests

My macbook pro shuts down OSX and all my programs when the lid is closed

Hi,
I am having a problem. My macbook pro shuts down OSX and all my programs when the lid is closed. I close the lid, and then I hear the shutdown music and then when I open it again it automatically restarts OSX and all my windows and programs are closed, any info gone.
This doesn't happen all the time. Just once a day or maybe twice a day. It seems like it happens basically when I have my computer just the way I want it, to keep an eye on things for the day.
I just recently switched to a mac and while somewhat savvy, I am not a programmer or techie, but it seems to me that when I shut the lid, it should do the same thing every time.
I have a intel core 2 duo 17 inch macbook pro with 2.33 processr and 2 gig ram, if that helps.
I am in alaska and there is no genius bar here and I am hoping to figure this out before I begin bugging our local independant mac store about this.
Thanks in advance,
Lylah
17 inch Macbook Pro Mac OS X (10.4.9) intel core 2 duo 2.33g. 2 gig ram

Ahhh, enlightenment!
That would make sense. What I usually do, after closing the lid, is to wait for the apple to turn off and then set it down on it's side leaning it against the side table. I will try to wait for it to indicate that it is fully asleep before I move it next time. Personally, I prefer my computer to NOT fall asleep at all, but I am told it is not an option. Apparently this function is hardware related accoring to my local mac shop. They tracked it down for me because I hated this feature when I first bought my computer and was trying some way around it.
The shutdown music I was refering to was that music the mac makes when shutting down, which doesnt usually occur when it goes to sleep, unless it is malfunctioning like this.
What does resetting the pmu do? (what is a pmu as well?)
Thank you very much.
Lylah

Installed 7.1 on new Dell. Windows shuts down as result of "nixsrk.dll" problem.

I installed LV 7.1 on new Dell with XP.While running the LV application, Windows shuts down to prevent damage to computer as result of "nixsrk.dll" problem. What is the fix?
Thanks,

How is your application architected? Are you making calls to DLLs using a Call Library Function Node? It might be that for some reason some of the components for your application were installed correctly on the Dell computers. I would suggest that you try some other application and make sure whether the issue is with your application or LabVIEW installation.
Regards,
Chetan K
AE-NIC

Firefox doesn't close when Windows shuts down

When Windows (in my case: Win XP SP3) shuts down, it sends a message ("QUERY_UNLOAD" in many programming languages) so that the active programs can finish their jobs (e.g. ask about unsaved data) and then exit. It seems you developers have reached v25 of Firefox and not thought of programming this small bit -> Windows shut down - an open Firefox doesn't give a fuck about exiting, you have to cancel it via Windows.
It would be nice to have this little effort of programming done - at last - thank you.

What an answer: The user asked to circumvent the shortcomings of a program.
Firefox should be able to do what 99% of all programs actually do, i.e. close gracefully when Windows shuts down. This is the industry standard.
And: I guess it's not more than a 2- to 5-lines code. So, don't try to evade it, lazy.

Computer Keeps Running after Windows Shuts Down

I recently installed XP SP2 for the first time. Now, when I shut down Windows, the OS shuts down fine and the screen goes blank, but the computer itself keeps running for about 15 seconds. This has never happened before. Any ideas?

Try a more powerful power supply. It normal rated load on the 12v rail is only 4.5 amps with a max of 16.
http://www.endpcnoise.com/cgi-bin/e/std/sku=nx-3500

Portege M300 hangs after "Windows shuts down" comes up on the screen

The computer hangs after "Windows shuts down" comes up on the screen. The same happens in hibernation mode. I have to turn off the computer by holding the on/off button.
I have updated my bios, installed all windows updates that are available and done a numer of other things. It startd just out of the blue. Any ideas?

Hi
Does it happen after the OS installation from the Toshiba recovery CD???
Did you install any further programs???
I have noticed a similar freezing on my notebook. Mostly it happened because the background process did not close and therefore the notebook could not force the shut down. In my case it was a adobe acrobat reader which could not close.
I think you should defragment you HDD and use the CCleaner freeware application.
This program cleans program errors and corrects the registry entries.
Try it! Maybe its not a serious issue!

Windows shuts down while importing CDs

Please help!
I purchased my iPod 30 Gig Video about two weeks ago. I have a Windows XP Home SP2 computer. When I’m importing CDs Windows shuts down the computer and dumps the physical memory. This happens when I usually put in the second CD. Here are the specs of my computer:
AMD Athlon XP 2800+
2.08 GHz, 1.00 GB of RAM
I have a Memorex DVD 16+/-DL4RWD2 DVD/CD-ROM drive
For my virus protection I’m using Trend Micro PC-cillin Internet Security2006
When the problem first started I uninstalled and reinstalled the iTunes/iPod software. I made sure that all of the previous versions of iTunes and Quicktime were deleted. When I reinstalled I turned off my virus protection.
Lately when I’ve come across this problem I turn off the virus protection thinking that that might have something to do with it.
I have all the current Windows updates and the drivers for all of my hardware is also current. I don’t know if my virus protection is causing many problems (i.e. firewall, etc.) Can someone please help?
Thanks.

Your's isn't a dual processor (or simulated dual processor, aka, hyperthreaded) machine, is it? I and many others have found this problem to occur on such machines (when is Apple going to fix this problem?) Some have found forcing iTunes to run on only one processor to be a successful workaround (there are at least a couple freeware utilities out there (I don't recall their names OTTOMH) that will force a PC app to run on only one processor on multi-processor machines, or you can try, after starting iTunes up, cntr-alt-deleting and selecting Task Manager, then in the list of running apps, right-click on iTunes and choose Go To Process, then right-click on the selected process and select Set Affinity, and uncheck one (or all but one if you happen to have more than two processors) of the boxes) but this didn't work for me: I had to physically remove one of my two processors - I haven't had the problem since, so I'm confident that was (is) the problem in my case. (But I'm still ****** 'cause I very purposefully bought a dual processor machine; it just so happens that right now I'm doing more CD importing than dual core work, so for now it's the best solution for me, but I eagerly await the day I hear that Apple has FIXED THIS PROBLEM!)

I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!

I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!

Without proper system information and other details nobody can tell you anything. If the program shuts down after a while then presumably it fails to verify your activation, so refer to this:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium

MY mac mini shut down unexpectedly and now it won't restart properly

My mac mini shut down unexpectedly. When I restarted it the screen turns blue and a box pops up that advises "Finder quit unexpectedly". It gives me an option to ignore, Report, or Reopen. The cursor works, but none of those button work. I'm stuck on this screen. I tried all the support suggestions with no luck. What else can I do?

The "worm" as you call it is usually referred to as a Thermometer progress bar. It is showing that your Hard Drive cannot be mounted, and a Disk Utility (Repair Disk) is taking place. If not successful, your Mac will shut down, since it cannot be started up successfully.
You have unresolved Damage to the Disk Directory.
If you do not have Backups, making them should be Top Priority.
Otherwise, boot your Mac from an alternate Boot Drive. If you do not already have one, buy a drive to replace the Internal Drive currently inside your Mac, and an External enclosure to run it in. Install Mac OS X on it and boot your Mac from the fresh Install.
Then you can attempt to repair or salvage from the old drive at your leisure, using the full power of Mac OS X to do so. When your situation is stable, swap the Internal and External drives.

My sql+ windows shuts down autmatically and cannot login why?

Similar Messages

Maybe you are looking for