My SSM messaging quit working.  Only iMessages seem to be functioning correctly.  Ideas?

My iPhone 5 SSM messaging isn't working any longer.  Only iMessages seem to be functioning correctly.  Tried restarting, updating network settings.  Would prefer not to wipe phone and hope it works.

Do you mean SMS text message?
troubleshooting message http://support.apple.com/kb/ts2755
if the link doesn't help, then contact your cellphone provider as SMS is a carrier feature.

Similar Messages

  • Messaging quits working suddenly

    I messaging quits working suddenly, then later, an hour or two will start working again.  Have tried rebooting, logging off wifi and reconnecting, logging off apple and reconnecting.  Nothing I do works, then later it starts working again.  Help!!

    Hello Macintexas,
    It sounds like Messages is only intermittently working on your iPad mini.  I found an article with steps to troubleshoot issues with sending and receiving messages. 
    I recommend reviewing the sections titled "If you can't send or receive messages" and "If you still can't send or receive iMessages" in the article listed below.  Step 2 specifically is applicable for the symptoms you are experiencing with Messages:
    2. To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iOS: Troubleshooting Wi-Fi networks and connections
    You can find the full article here:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • Help!!! I can't receive or send text messages...only imessaging

    How can I get my new iPhone 4s to send and receive text messages?

    Hi, I have a ipod touch 3g with the latest ios 5.  I can't seem to send text messages via the green "message" icon.  The imessage icon is on but it doesn't work....would you know of anything else I can do to allow messages to send and receive??  thanks

  • Message app works only in sidebar

    The message app only works in the sidebar. I could write new messages and reply only in the sidebar.
    No overall view, no conversations are available...
    The message app didnt work really. All the buttons in the app are grey. I have no option to make settings in the menu.
    It works really good till tomorrow.
    I already reinstall Yosemite new

    for the   Points
    7:57 pm      Monday; December 8, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Messages quit working following 10.9.4 update

    Following the update to 10.9.4, I am unable to log into messages on my MacbookPro.  When I go to messages I am shown as Offline and when attempting to login with Apple ID, I always get the note "An error occurred on activation, try again."   I am able to use it on my iPad.  Having searched the Support pages, nothing has worked.  Here is information on my machine from EtreCheck.  Any assistance getting messages up on my Macbook would be appreciated.
    EtreCheck version: 1.9.12 (48)
    Report generated July 25, 2014 at 8:48:49 AM PDT
    Hardware Information:
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4 cores
      8 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 1 day 23:15:31
    Disk Information:
      Hitachi HTS725050A9A362 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 459.25 GB (250.32 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 40 GB (6.76 GB free)
      MATSHITADVD-R   UJ-8A8 
    USB Information:
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    FireWire Information:
      Seagate GoFlex Desk Mac 800mbit - 800mbit max
      EFI (disk1s1) <not mounted>: 209.7 MB
      FreeAgent GoFlex Drive (disk1s2) /Volumes/FreeAgent GoFlex Drive: 2 TB (691.06 GB free)
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
      [loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    Launch Agents:
      [running] com.Affinegy.InstaLANa.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.lexmark.bmspecificlaunchd.plist Support
      [loaded] com.lexmark.lxknetlaunchd.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.seagate.SeagateStorageGauge.plist Support
    User Launch Agents:
      [loaded] .dat00fc.000 (hidden)
      osascript -e tell application "Folder Actions Dispatcher" to tick
      [loaded] com.divx.agent.postinstall.plist Support
    User Login Items:
      Garmin Lifetime Map Updater
      iTunesHelper
      Dropbox
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 60 Check version
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes:
      Flash Player  Support
      Java  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 427.71 GB Disk used: 194.58 GB
      Destinations:
      FreeAgent GoFlex Drive [Local] (Last used)
      Total size: 2 
      Total number of backups: 68
      Oldest backup: 2011-08-16 03:50:19 +0000
      Last backup: 2014-07-19 15:46:30 +0000
      Size of backup disk: Excellent
      Backup size 2  > (Disk size 427.71 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          9% backupd
          2% WindowServer
          1% mds
          1% opendirectoryd
          1% fontd
    Top Processes by Memory:
      254 MB mds_stores
      172 MB softwareupdated
      156 MB Safari
      139 MB com.apple.IconServicesAgent
      115 MB Mail
    Virtual Memory Information:
      3.37 GB Free RAM
      2.72 GB Active RAM
      592 MB Inactive RAM
      1.33 GB Wired RAM
      12.18 GB Page-ins
      0 B Page-outs

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
    Step 3
    Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
    Step 4
    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 5
    Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 6
    From the menu bar, select
               ▹ System Preferences... ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
    The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
    Step 7
    Select from the menu bar
               ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
              Block all sites from storing information on this computer
    Close the preference pane.
    Step 8
    Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
    Step 9
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 10
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
    If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
    Step 11
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.apsd.plist
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 12
    Reset the NVRAM.
    Step 13
    Reinstall OS X.
    Step 14
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • Cannot print due to error message--printer working with Internet Explorer--How do I correct?

    Last week printer worked fine with Firefox.
    This week a message comes back "an error occurred while printing".
    Printer works fine with Internet Explorer.

    To test how Firefox runs "uncustomized" on your system, could you do a two-minute experiment?
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    Any time you want to switch profiles, exit Firefox and return to this dialog.
    You'll click the Create Profile button. I recommend using the default location suggested (i.e., just ignore the option to choose a different folder). Then start Firefox in the new profile you created.
    Can you print?
    When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • E3200 quit working, I already tried factory reset, out of ideas...help please?

    I've had the E3200 for 3 weeks now and it has been running perfectly until last night. It's broadcasting its SSID and when I open network properties on my computer, it says I'm connected to the internet. However, when I troubleshoot with windows and cisco connect they both recognize that I'm not connected to the internet. Tried with 2 other laptops, an andriod phone, and an iphone with the same results. I live in an apartment building and the only thing we need to set up is a router for wifi (modem   connection is taken care of in the basement) so there's no issues with a modem because the other tenants have internet, and when I connected my laptop directly to the wall I had internet access so I'm pretty certain it's an issue with the router. I tried a factory reset and went through the installation again but had the same result as before. I called customer support but they had me on hold until I had to leave for class. HELP PLEASE!

    You may need to reconfigure the router. What is the IP address that your computer is getting if it’s directly connected to the wall? If using the setup cd to reconfigure the router didn’t work, try doing it manually. These links will guide you thru in doing the reconfiguration manually: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection.

  • The phone sound not working, only the ringtone and alarm functions.

    please help with this issue.

    I have had that happen to me. A reset of the SMU fixed it.
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on a Power Mac G5 :
    http://support.apple.com/kb/HT1436
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379

  • HT4528 my Iphone 4s quit working and it is hot!

    My phone quit working.  It seems to be getting hot off and on.  How do I contact apple to get my phone replaced since I have applecare?

    An intelligent person would start with the "Contact Us" link at the bottom of every page of the Apple website.

  • Number pad on Mac Mini quit working

    I have a computer lab of 22 Mac Mini's. The number pad on one of them has quit working, just the numbers. The function keys still work. I have swapped keyboards with other Mini's and the probelm does not follow the keyboard. I have tried both a Mac Pro and Kensington keyboard and both do the same thing. Any ideas how to dorrect this?
    Mac Mini   Mac OS X (10.4.3)  

    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Posting is only possible with a zero balance; correct document

    Hello SAP gurus,
    Please help me here. I tried to post a vendor invoice but i got an error message "Posting is only possible with a zero balance; correct document". 
    The debit and credit balance is correct. In document entry i  checked calculate tax and the GL master was assigned a tax code. How can i correct the document and be able to post the invoice?
    Thanks in advance,
    Prakash

    Hi,
    I had also faced same issue and got it resolved.
    For resolving it, I made necessary changes in Editing Options in transaction FB01.
    These Editing options are user specific settings and these can be found in transaction FB01 -
    Go to Settings --> Editing Options (F9).
    Alternatively, you can click Editing Option Button on FB01 Screen (Call Up Editing options for Accounting).
    Please check if it resolves your issue.
    Best Regards,
    Rajinder Sharma

  • My iMessage quit working on my iPad 2. I can only receive messages. I used to be able to send and receive.

    My iMessage quit working on my iPad 2. I can receive messages but not reply.  Can anyone help?

    How  long has it been going on? Both of my yahoo accounts have messed up, but it's something on yahoo's end. I just had to wait a day or so for  it to resolve itself.
    If that doesn't work, have you tried to delete and then readd the accounts?

  • I only have access to wifi, imessage started defaulting to green text message instead of blue imessage to people who it previously worked fine with.  Now I can't send outdoing messages, i have turned SMS off and it still does this, any suggestions?

    I only have access to wifi, imessage started defaulting to green text message instead of blue imessage, thus they fail to send, I have turned off SMS and restarted the phone and the problem gotinues.  Any suggestions?

    iPads only support iMessage. You cannot send SMS with any of the native iOS functionality on it. There may be some apps in the app store that will, and certainly several messaging platforms (but read the descriptions carefully).

  • Every time I open Firefox or open a page in a new tab, I get the error message that a script on this page is not responding or has quit working. This has only happened since I upgraded to 5.0.

    Even when I start firefox I have to sit here and wait for it to tell me a script on this page is not responding or has quit working. Once that happens which takes a while, I can say stop script and it moves on. I've always liked using firefox and have never had a problem in the past, however if I can't get this particular problem fixed, and I've tried many ways to do this, I may have to change to another browser. I would hope that you could find out why this is happening to me before I make that decision. One other thing, I am using the dreaded Vista OS.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • SMS in Yosemite messages not working. "Not registered with iMessage"

    Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
    When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
    I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
    Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
    Thanks!

    Hi,
    It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
    There is one Error Messages that is seen that is known to be very similar.
    This Error can only be fixed by Contacting Support.
    What is does prove though is the The Apple ID in use can be rejected on a  Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
    Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
    It is called IDS: yourApple ID- Auth Token
    If deleting this does not work try repairing the Keychain.
    After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
    Fixing and Apple ID/Account is free.
    7:22 pm      Tuesday; January 13, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for