My standby ASA 5512 won't sync.

I have a primary and standby pair of 5512's. This is a new configuration. The primary and standby are using 8.6(1)12. The primary is operational. When I attempt to sync the standby, I get these:
ERROR: <acl-global> element cannot be created
ERROR: <acl-global> element cannot be created
ERROR: <acl-global> element cannot be created
-lots of these-
Then the standby reboots and it starts all over again. Help!

We should be able to resolve the file sync problem without needing to reinstall or change your user account.
Have you used any restricted characters in your file or folder names?
Help article: Error: "Unable to sync files". If none of the steps in the help article resolve the problem then please email your Core Sync log files to [email protected]
The location for each OS are:
Mac OS X: ~/Library/Application Support/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
Windows: %APPDATA%/Adobe/CoreSync/CoreSync-yyyy-mm-dd.log
Note that on Mac OS X to see the user library from the Finder click on the Go menu and hold down the Alt/ Option key. Note that on Windows %APPDATA% is a variable that will change to the correct path depending on if version of Windows being used.

Similar Messages

Cisco ASA 5512 two interfaces

i have an Cisco ASA 5512 working as Firewall
We configure one ASA interface connecting to Cisco router 1700 with leasd line internet service without any problem.
Now we have an extra internet connection ADSL 2MB connected to another ASA interface
I configure the ASA like this :
1-    Enable interface 2 on ASA and connect it to ADSL router (interface ip 192.168.1.100 from the same ADSL router {192.168.1.1}range )
2-    Create Access rule say source (My computer ip) destination ADSL network range action accept
3-    Create Nat Rule say source interface inside source ip (my ip) destination interface ADSL ip 192.168.1.100 destination source router ip 192.168.1.1
4-    Add static route say ADSL interface source ip my ip gateway ADSL router
This steps what I do but it doesn't work.
Thanks in advance

FYI for internet access I doubt this will work because if you configure two default route then ASA won't distribute traffic across two interface, first default route will be the one where ASA will send traffic. However from your description it is not very clear which IP address you are trying to ping and how exactly rules you have configured.
Either attach your config or paste the relevant config in post.

ASA 5512-X - VPN & local clients DHCP relaying (DHCP Proxy vs. DHCP Relay conflict)

Hey all,
I have ASA-5512-X serving as general firewall/router. It also serves as AnyConnect SSL VPN gateway (webvpn).
It has ~10 VLANs connected over 1 trunk port. One of the VLANs has DHCP server that shall serve all the VLANs (192.168.16.2).
I'm trying to have the ASA relay DHCP requests from all VLANs to the DHCP server and to also serve VPN clients.
However, according to bug https://tools.cisco.com/bugsearch/bug/CSCsd22469 both DHCP Proxy (webvpn) and DHCP Relay (local interfaces) can't be enabled at the same time.
As VPN clients connect to the same VLANs as local users (eg. VLAN 2 - 192.168.2.0/24) I want to have the very same DHCP server serving both, otherwise it's gonna become a mess.
Note: if I configure DHCP Relay functionality and disable DHCP Proxy - local clients are served fine. If I configure DHCP Proxy (webvpn) and disable DHCP Relay VPN clients are served fine. I therefore consider setup to be correct, just the ASA limitation won't allow me to make it serve both.
Can DHCP Relay also serve VPN clients (no DHCP Proxy enabled)? did I miss something?
Thanks!

Hi,
The only workaround for this issue is to configure the ASA itself to act as DHCP server for vpn clients. You also have the flexibility of using local pool and AAA server. Why exactly do you want to use the same DHCP server for both?
AM

How to Configure Cisco ASA 5512 for multiple public IP interfaces

Hi
I have a new ASA 5512 that I would like to configure for multiple public IP support. My problem may be basic but I am an occasional router admin and don't touch this stuff enough to retain everything I have learned.
Here is my concept.    We have a very basic network setup using three different ISPs that are currently running with cheap routers for internet access. We use these networks to open up access for Sales to demo different products that use a lot of bandwidth (why we have three)
I wanted to use the 5512 to consolidate the ISPs so we are using one router to manage the connections. I have installed an add on license that allows multiple outside interfaces along with a number of other features.
Outside Networks (I've changed the IPs for security purposes)
Outside1 E 0/0 : 74.55.55.210 255.255.255.240 gateway 74.55.55.222
Outside2 E 0/2: 50.241.134.220 255.255.248 gateway 50.241.134.222
Inside1 : E 0/1 192.168.255.1 255.255.248.0
Inside2 : E 0/3 172.16.255.1 255.255.248.0
My goal is to have Inside 1 route all internet traffic using Outside1 and Inside 2 to use Outside2.    The problem is I can't seem to do this. I can get inside 1 to use outside 1 but Inside2 uses Outside 1 as well.
I tried adding static routes on Outside2 to have all 172.16.248.0/21 traffic use gateway 50.241.134.222 but that doesn't seem to work.
I can post my config up as needed. I am not well versed in Cisco CLI, I've been using the ASDM 7.1 app. My ASA 5512 is at 9.1.
Thanks in advance for the suggestions/help

I have been away for a while and am just getting caught up on some posts. so my apology for a delayed response.
I find the response very puzzling. It begins by proclaiming that to achieve the objective we must use Policy Based Routing. But then in the suggested configuration there is no PBR. What it gives us is two OSPF processes using one process for each of the public address ranges and with some strange distribute list which uses a route map. I am not clear what exactly it is that this should accomplish and do not see how it contributes to having one group of users use one specific ISP and the other group of users use the other ISP>
To the original poster
It seems to me that you have chosen the wrong device to implement the edge function of your network. The ASA is a good firewall and it does some routing things. But fundamentally it is not a router. And to achieve what you want were a group of users will use a specified ISP and the other group of users will use the other ISP you really need a router. You want to control outbound traffic based on the source of the traffic, and that is a classic situation where PBR is the ideal solution. But the ASA does not do PBR.
HTH
Rick

BRAND NEW IPOD SHUFFLE WON"T SYNC WITH ITUNES

getting an error message of 'the ipod cannot be synced, The disk could not be read from or written to'
Tried restoring factory settings, won't restore.
Itunes are sitting in library but won't sync to IPOD. HELP!

You have posted in the forum for problems & questions with using the iTunes store. You should find more help in the shuffle forum.
http://discussions.apple.com/category.jspa?categoryID=199

Podcasts won't sync - error "no longer exist"

i connected my ipod to sync to itunes. for some unknown reason, itunes was blanked out and when it synced, it wiped everything off my ipod. i reuploaded everything from my hard drive and subscribed to/downloaded podcasts. however, now when itunes syncs with my ipod, i get a message that the podcasts no longer exist so it won't sync. help! i miss my podcasts!!!

It has nothing to do with being authorised, that doesn't affect Podcasts. Plus, you already have them on your computer.
Did you have to change the settings for the Sync Podcasts? If you did, then you may need to perform another Sync to make sure the "change" has been implemented.
If not, then:
Have you previously managed to Sync Podcasts with this iPod?
Are they Podcasts, downloaded as Podcasts through iTunes?
Are they iTunes U programmes?
Are they video Podcasts?
Do you see any error messages when you Sync the iPod with iTunes?
Where, on your iPod, are you looking for the Podcasts?

I have moved my music to my new mac air but now it won't sync with my ipod or my iphone 4s

I have transferred mymusic to my new mac air from an acer laptop via an external hard drive and it's all there on the mac but now itunes won't sync with my ipod touch or my iphone 4s.
With the ipod it says 'iTunes could not connect to this iPhone. Could not connect to the device " It also doesn't show up at all in the devices section.
With the iphone it says there isn't enough space to sync even though I have experimented and unticked various things including photos which takes up a lot of space. It seems like it wants to sync with the empty space on the iphone (very small!) and not with the whole thing. I have tried various things suggested on this forum but have had no luck.

iOS: Device not recognized in iTunes for Mac OS X
Also see:
If you connect the iPod to another computer does iTunes not see it?
What version of iTunes is installed?
Whast model iPod and iPhone and what iOS version?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
For the enugh space, you are trying to sync too much media to the iPhone

Voice Memos won't sync to iTunes anymore

So for some reason when I sync my iPhone 3G, the voice memos won't sync to my iTunes library.
The "Sync voice memos" box is checked and older voice memos from April and before synced in the past.
Now there's just a Voice Memos folder under my iPhone Tab and the new voice memos won't appear in my iTunes Library at all.
I want to convert them to Mp3 but that option is grayed out under the iPhone Voice Memos folder.
Is this just a bug? I recently bought a new computer running Windows 7, so I'm wondering if this is a common issue with iTunes?
Any suggestions?

Even though this topic is considered answered, my Voice Memos weren't syncing and the software update didn't fix it. So, I did this:
1) I backed up and synced my ipod
2) deleted the voice memos playlist in iTunes (my playlist was empty already)
3) deselected "include voice memos" under the Music tab
4) clicked "Apply"
5) when sync was done, shut down iTunes
6) disconnected and reconnected iPhone and restarted iTunes
7) reselected "include voice memos" under the Music tab
8) clicked "Apply"
A new Voice Memo playlist was created with my voice memos in iTunes.
It's possible you can skip the step of deleting the playlist. I was just trying everything I could think of to get it going again. Maybe you can skip the whole first half and just shut down iTunes and reconnect device and sync again! So try and let us all know.
I think what was happening - and why it will work for some to upgrade their software - was because I had an iPod Touch with 3.1 syncing memos to iTunes before. Maybe the iPhone with ios 4 couldn't sync to the folder already created?

IOS4 large Voice Memos won't sync

Hi,
I just upgraded my iPhone 3G(s) to iOS 4 yesterday and today I'm having problems with large Voice Memos. I use this heavily in my work with memos over 1 hour in length and never had a problem with syncing with my iTunes 9.2 (61) on my iMac/10.6.4.
Using iOS4 for the first time today I made 2 long recordings. One appears to have been corrupted on the iPhone (never happened before) and the other won't sync. I was able to pull both off using iPhone Explorer and the second can be added manually to iTunes and it plays fine.
Is there a bug in iOS4 Voice Memos for 3G(s) in this regard? Any suggestions?
Thanks.
Bob

I have this problem as well on a iPhone 3GS with OS4. Seems that OS4 broke some things. I had a 2 hour recording that wouldn't play on the iPhone. iTunes would sync the recording, but when I tried to play it on the PC, the PC kept saying it was not a recognized format. Short recordings worked just fine, just not long ones. Even ones that were just 15 minutes wouldn't work.
Try this program for either the MAC or Windows. It works great. Iphone Explorer
http://www.macroplant.com/iphoneexplorer/
(taken from a previous post on similiar subject)
Downloaded and installed iPhone Explorer. Looked in the recording directory on the iPhone and sure enough, there was a MOV version of the recording still on my iPhone that was 2 weeks old. Copied it to my desktop and it plays just fine. Thanks guys for pointing out iPhone Explorer. Also found other MOV versions of recordings in that directory that I thought were gone because they were lengthly recordings. Your right, APPLE needs to fix this issue. At some point, all of the left over MOV versions of the recordings will eventually fill up the data space on the iPhone.

Voice Memos won't sync

I have two newly recorded voice memos that won't sync to iTunes. I have no issues syncing other voice memos, it is just with these two specific files. Is there a way to "force" iTunes to sync these files? Alternatively, is there another way to get these files onto my PC (they are apparenly too big to email or message directly from the Voice Memos app).

Even though this topic is considered answered, my Voice Memos weren't syncing and the software update didn't fix it. So, I did this:
1) I backed up and synced my ipod
2) deleted the voice memos playlist in iTunes (my playlist was empty already)
3) deselected "include voice memos" under the Music tab
4) clicked "Apply"
5) when sync was done, shut down iTunes
6) disconnected and reconnected iPhone and restarted iTunes
7) reselected "include voice memos" under the Music tab
8) clicked "Apply"
A new Voice Memo playlist was created with my voice memos in iTunes.
It's possible you can skip the step of deleting the playlist. I was just trying everything I could think of to get it going again. Maybe you can skip the whole first half and just shut down iTunes and reconnect device and sync again! So try and let us all know.
I think what was happening - and why it will work for some to upgrade their software - was because I had an iPod Touch with 3.1 syncing memos to iTunes before. Maybe the iPhone with ios 4 couldn't sync to the folder already created?

Voice Memos won't sync to iPhone

I have Voice Memo's in the "iTunes\iTunes Media\Voice Memos" Folder that won't sync across to my iPhone. Is there a way of getting them to transfer across?
I am using iOS 5 and iPhone 3GS 32GB.
Thanks,
Nathanial

I'm having the exact same problem. IPhone 4, ITunes 10.6

Voice memo won't sync with iTunes

Help! I have a 25 minute recording which won't play on my iphone and won't sync and download onto my iTunes! What do I do?

If it won't play on your phone, & itunes won't download it, it may be corrupted. Try & see if phoneview can extract it from your phone:
http://www.ecamm.com/mac/phoneview/

Voice memo won't sync!! and won't let me email either!

believe me, i've got all settings correct.
I've been using voice memo for a long time and now for the first time it just won't sync at all
i've noticed lately that sometimes the voice memo doesn't sync,
I thought I operated wrongly, synced the iphone again, and was able to get the memos out.
BUT NOT THIS TIME
it's like permanently stopped working
I've got an important lecture in there and have to get it out asap
why doesn't apple even allow users to email large memos over wifi at least!??
this is really upsetting and disappointing
I seriously don't understand apple's logic on this

thanks, I just used iExplorer to get it out too
apple seriously has to listen to its customers
such huge amount of users have been complaining about this tiny yet important issue
they just don't give a dang
won't even allow users to have an alternative way of retrieving their files, and we have to use a 3rd party app to do their job??
this is such a joke
it's even on the official website, like thousands of people have complained about the same problem for YEARS, numerous updates never fixed any bit of this
what's your excuse, apple?

Iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....

iphone 4 version 5.0 (9A334) won't sync with itunes 10.5 (141)....
this message keeps popping up when I try to sync my iphone
"could not be synced because the sync server failed to sync the iphone"
anyone have this kind of problem?
googled it, and it's so confusing @.@

There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly. I've seen lots of workarounds on the forums here. Just search for it and see if you can come up with something that works.

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

My standby ASA 5512 won't sync.

Similar Messages

Maybe you are looking for