My standby button is not working ...
What Should i do ?
Have you tried to restore your iPhone to the factory settings? If the problem still exists after the restore to the factory settings, I think it's a hardware problem. In that case I think you have to go to the Apple Store so they can fix the problem or give you a new iPhone. I think this is in guarantee, so the solution must be free for you.
Similar Messages
-
My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?
A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Why cant I add contacts on the iphone4? the mail contacts calendars button unders settings, the contacts button, the add a contacts button under message and the phone button will not work to add a contact.
Have you attempted a restore?
-
VS2005 Crystal Report Print Report Button is not working on Windows 7 x64
Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AMI follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM -
My G4 powerbook running OSX 10.3.9 starts up with a black screen. The reset button is not working. Does anyone know which keys to press on restart please.?
Try holding the shift key while booting to get Safe mode if possible.
See links for more info.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455 -
Froze on black screen and power button does not work
my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is there anyway to power off an I-phone 4s if the power button is not working?
Is there anyway to power off the phone if the power button is not working?
Assistive Touch. Tap Settings App > General > Accessibility > Assistive Touch > ON > at bottom of screen tap button > Device > press and hold Lock Screen icon > when slide to power off appears > slide it. To turn iPhone ON connect to Power Source with USB cable, charger or USB port of computer.
All iPhone 4S have full Warranty Coverage. Make Genius Reservation and take iPhone to Apple for resolution. -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful! -
Help button is not working in Infoview
Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.CLOSED
-
Centre button is not working properly in my iphone . . what can i do for that ?
centre button is not working properly in my iphone . . what can i do for that ?
Get it serviced.
-
I used assistive touch to turn off my iphone, because my lock screen button is not working, so now i cant turn it back on! What i did was, i went to assistive touch, then i held down the lock screen button to turn it off. Now i can't turn it back on.
To turn it back on when you use assistive touch, all you have to do is plug your iphone into a charger and it will power back on
Maybe you are looking for
-
Ipad 4 retina display facetime problem
i have a ipad 4 retina wifi my problem is face time is not install on my ipad. i can only see 's the face time icon only in notification. what would i do so ican use my facetime app? plesa
-
Syntax Error while writing VBScript in OFT 9.1
Hi All, I am new to OFT 9.1 (not using OpenScript). I have a simple VBScript code which I have copied inside Test Scriptlet After Page. After pasting code, I click "Done" button and then save the script. While doing this the script pane shows me synt
-
I keep getting error message when trying to convert a pdf to a word doc
I keep getting an error message when ttying to convert pdf to word.
-
Hi, I am new to SQL can i use IN operator on BETWEEN AND. or LIKE operator on BETWEEN AND. if so how please help in this
-
SQL Server Service is not reflecting to the new name.
Hi, I just rename the computer and use the command below to rename the SQL Server but the SQL Server Service is not reflecting to the new name. Is there a way to change the SQL Server Service and agent to reflect the new name or do I have to re-insta