My start page looks VERY different to the one you show !!!! use windows vista

my start page does not show the icons you display in your ' getting started. I use windows vista. firefox runs no problem -BUT -
i have to repeat most task when the computer restarts & icons you display are NOT shown ????

I just thought I'd tie this all together by saying I have completely resolved this now. I have now got the Spyder3 which I use with Integrated Color's ColorEyes Display Pro and I no longer have the problems I was experiencing before. For the first time I actually feel confident that my monitor is displaying correctly. Thank you to everyone who helped in this discussion - I highly recommend both ColorEyes (the support is fantastic too) and the Spyder3. Don't be put off by any previous bad experiences with the Spyder2 - the 3 really is a great device.
Many thanks,
J

Similar Messages

  • Help Please..Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned). How do I transfer the library from the 160 to the 80gb in iTunes using Windows Vista (ie merge the 2 libraries)? Thanks

    Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
    How do I transfer the library from the 160gb  to the 80gb in iTunes using Windows Vista.
    Nothing seems to help on the Apple support pages, so any help would be appreciated
    Thanks

    Thanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
    Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
    Any help or pointers greatly appreciated
    Thanks

  • I open up yahoo and my messenger (no the full version) the one you can use in your mail. Now that I have opened I can't close it even though I hit sign out again and again. Please advise.

    I am new to using a mac I have an older version. But I have used firefox on my pc before. I downloaded it and went to open messenger. Not the full downloaded messenger but the one you can access when in your mail on yahoo. It opened fine but now it won't close, even though I hit sign out again and again. I have tried force quite, uninstalling and reinstalling and still every time I sign into yahoo on firefox there is my messenger list open. For privacy issues I really need to be able to open and close it.

    Known issue, our QA team working on it, See
    * https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    you can follow the bug by opening bugzilla account and add yourself to CC list :)

  • HT1212 What if the Iphone states it is disabled connect to I-tunes but you don't have a computer and the one you are using wants you to trust it but you can't because it doesn't give you the option on your phone because it is locked?

    What if the I-Phone states it is disabled connect to iTunes and when you don't have a computer available that is sync with phone, but are using a different computer. You can't trust the computer from your phone because it is locked.  How do I gain access.

    bubblesblom wrote:
    Okay, so my friends think it is funny to change the passcode on my iPhone.
    Maybe you should get new friends.
    I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
    If you can't update or restore your iOS device - Apple Support
    If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
    iCloud: Erase your device - Apple Support
    This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

  • HT1386 My iTunes page does not look like the one you show in iOS: Syncing with iTunes

    How can I synchronise my Apps between iPhone and iTunes?

    iTunes>View>Show Sidebar...look like the pic now?

  • I can't update apps on my IPhone because my e-mail address is different from the one that shows up on my apps update screen

    I can no longer update my apps on my IPhone 4 because I have a new e-mail account. When I try to update with my Apple ID the e-mail that shows up on the screen is my old e-mail address and since I once shared that with another person I no longer know the Apple ID for that particular e-mail.
    How do I change the old e-mail address and keep it from showing up on my apps update screen? I have deleted the old e-mail account from my phone.
    Thank you

    deena102 wrote:
    I can no longer update my apps on my IPhone 4 because I have a new e-mail account. When I try to update with my Apple ID the e-mail that shows up on the screen is my old e-mail address and since I once shared that with another person I no longer know the Apple ID for that particular e-mail.
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

  • What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

    Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

    I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
    I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
    So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
    I hope this helps some people.

  • Why do colors with identical cmyk numbers look very different?

    i thought i had this problem solved, but here it is again with a new wrinkle.  i have this gorgeous orchid bg box, cmyk 9-10-0-0 in a file with cmyk transparency blend space.   same set up in file 2.  i create a new bg box with the same numbers and it's a whole different color.  there must be some parameters mismatched.  what else should i be looking for to make sure the file setups are identical?

    Attached is an image of what the color picker looks like after I have  used the eyedropper to sample what I believed to be a swath of CMYK  color.
    It looks to me like the image you are sampling  from is an RGB image. You can check that by opening the Links panel and  clicking on the link, which will display the image's color space and  profile.
    actually, what i'm sampling--the lavendar bg on left --is color i created in ID; it's not a link.  i thought i created it in cmyk; how can you tell it's rgb?
    If you are picking up an out-of-gamut color from  an RGB image, you can't match that color with a CMYK fill. You could  make the background fill an RGB color and get a match. In that case both  the fill and the image would get separated to the same CMYK mix on  output to a CMYK device.
    which does have a CMYK transparency blend space and separations preview in output.
    You  are confusing the Transparency blend space with a document color space.  The Transparency Blend Space only comes into play if you have  transparent objects that need to flattened. It has no effect on  non-transparent objects.
    hmmm, that's not my experience.  so far as i can determine, i have no transparent objects, and yet the color on  screen changes dramatically when i switch transparency blend space from rgb to cmyk.
    why does changing from View to Separations within Separations Preview change the color of my CMYK background so dramatically?
    Your  background isn't CMYK it's RGB. When you turn on Overprint or  Separation Preview, you get a preview of how your out-of-gamut RGB  violet color will convert to CMYK.

  • Can i use my blackberry torch charger to charge my iPod4s? The charger looks very similar to the 5W USB power adaptor that Apple sells to charge the iPod?

    can i use my blackberry torch charger to charge my iPod4s? The charger looks very similar to the 5W USB power adaptor that Apple sells to charge the iPod?

    Actually, the bb charger is a 5V, 750 mA charger (which would make it a 3.75W charger vs the 5W that Apple sells for the iPod). Therefore, I would think that my bb charger should work for both bb and iPod, but would charge the iPod at a slower rate, with little harm done to the gadget, but I defer to any opinion that would suggest otherwise?

  • HT5930 Why does my Aperture v3.5.i look different from the one shown in the online videos

    Why does my Aperture v3.5.i look different from the one shown in the online videos

    Are you asking about the colorful icons in the video?
    The video must have been done with an Aperture version 3.2.4 or earlier. Since Aperture 3.3 are the icons drab and gray - the Aperture 3.3 Release Notes are calling this:
    Newly designed monochrome source list and toolbar icons.
    The Release notes will tell you, what has changed since then:
    http://support.apple.com/kb/TS2518
    --Léonie

  • Since update to FF 16.0.1 the FF Start Page is blank, my bookmark toolbar doesn't show automatically + the navigation toolbars stays on the first url.

    Since update to FF 16.0.1 the FF Start Page is blank, my bookmark toolbar doesn't show automatically + the navigation toolbars stays on the first url.
    I uninstalled 16.0.1 and reinstalled 15.0.1 and everything worked fine so I reinstalled 16.0.1 and have the issues again.

    hello shanonrs, can you try launching firefox in safe mode once and see if the issue is occurring there too? maybe an extension or theme is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • I have an iPad that is now over twelve months old, it doesn't get over used, however in the last few days, it has started to get very hot after only a few minutes use, is this a fixable issue

    I have an iPad that is now over twelve months old, it doesn't get over used, however in the last few days, it has started to get very hot after only a few minutes use, is this a fixable issue

    Is it getting hot only when charging?
    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Using windows vista and all the graphics i create the colours look blurry?

    Hi everyone,
    I have just started using windows vista and i have noticed
    that when i create graphics using fireworks 8 that when i view them
    either on dreamweaver 8 or just using the windows viewer that the
    graphics and colours in the graphics look very blurry?? Does anyone
    know why this should be? As i was creating graphics successfully
    before with fireworks 8 when i was using windows xp and had none of
    these problems at all.
    Any advice would be most welcome.
    Many thanks,
    Gordon.

    Fireworks is not compatible with Aero. So, whenever you start
    Fireworks,
    Vista will warn you that Areo will not work and to use
    Fireworks you must
    disable it. Once you close Fireworks, Vista will
    automatically re-enable
    Aero. Obviously not a huge issue, but it is kind of annoying
    for the screen
    to flicker and lose all your pretty eye candy every time
    Fireworks starts.
    "Gordonuk" <[email protected]> wrote in
    message
    news:g6ithu$3eb$[email protected]..
    > Hi everyone,
    >
    > I have just started using windows vista and i have
    noticed that when i
    > create
    > graphics using fireworks 8 that when i view them either
    on dreamweaver 8
    > or
    > just using the windows viewer that the graphics and
    colours in the
    > graphics
    > look very blurry?? Does anyone know why this should be?
    As i was creating
    > graphics successfully before with fireworks 8 when i was
    using windows xp
    > and
    > had none of these problems at all.
    >
    > Any advice would be most welcome.
    >
    > Many thanks,
    > Gordon.
    >

  • In Options -- General -- I want the option to "Show my windows and tabs from last time" AND "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

    In Options --> General --> I want the option to "Show my windows and tabs from last time" '''''AND''''' "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

    You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

  • Use pages from other templates...not just the one you chose.

    Is there a way to choose a page from another template besides the one I started with. For example if I choose the "School Report" template, but want to also use a page from the "Lesson Plan" template, how can I do this. If you click add new page, it only gives you the initial template pages. I tried opening a new template and copying and pasting the page I wanted, but it does not work.

    My guess is that it's because the objects are floating ones.
    If you switch them as inline one, you will be able to copy the page, sometimes after inserting section breaks.
    Yvan KOENIG (from FRANCE mardi 10 février 2009 21:19:34)

Maybe you are looking for

  • Wipe and install OSX Leopard without the disk

    Hi everyone, I need to wipe my iMac and reinstall OS X Leopard. I have the install disks, but my CD drive doesn't work and can't read the disk. Is there a way for me to wipe and install OSX Leopard without the disk? Thanks.

  • Getting Day from the date :

    Hi, I want to get the day(Monday ,tuesday.. like that) and the input parameter for that function is the date let say 02/14/2006.

  • Where are the icons?

    I installed headstart with designer 6 with Oracle 8 on NT. Everything seems to work but I cannot get the icons to appear in the toolbar in the utilities and demo applications. My registry settings are: TK25_ICON : F:\orant\HSD21\hst\ico UI_ICON : F:\

  • Restart session from Failover point

    Hi, ODI process loading 10 million rows from Oracle to Oracle (same instance). Process failed half way after 2 hour. Anyone build any framework to restart from failed point? Can we save 2 hours? Regards

  • Product selection screen not appearing when uninstalling 11.1

    Hi, I installed the FR client version 11.1.1.2 onto my laptop which has windows xp. I need to uninstall it but the uninstall tool doesn't show any products to uninstall when I run it. If I click next I get a message to select a product. I have versio