My start up disk is full and the now the mac will not start

How do I get on my computer when my start up disk is full?

If you don't have a recent backup, then all your files will be lost.
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted

09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted

First this:
In EnergySaver deselect "put the hard disk to sleep when possible". You must logout after the setting to make this effective.
This probably will not solve it, but let it be deselected.
When the issue is still there:
Open Terminal;
copy/paste following command (after every command hit "enter" key)
pmset -g | grep hibernatemode
when the answer is not 3 write it down;
then copy/paste following command
sudo pmset -a hibernatemode 0
reboot
Open Terminal;
copy/paste following command
sudo rm /var/vm/sleepimage
after that type EXIT in Terminal and close Terminal.
This does following for you:
it will set the hibernatemode to zero: the sleepimage (a copy of the complete ram) will not be written and the space on the HD is freed up.
This sleepimage does not do anything for you but taking time at sleep/hibernate and startup. It is an old remnant of earlier days.

Startup disk is full and the laptop can't operate. How I remove files for it to work?

Startup disk is full and the laptop can't operate. How I remove files for it to work?

Can you turn on the Macbook Pro?
If yes, can you see the hard drive icon?
Have you emptied the trash?

HT3964 the indicator light on my mac book pro does not come on and the computer will not start

what can i do if the indicator light on my mac book pro does not come on and the computer will not start?

Here are a couple of trouble shooting articles that may assist you:
http://support.apple.com/kb/ts1367
https://discussions.apple.com/docs/DOC-3353
Ciao.

Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

If your model Macbook Pro is the calibrating model, let the battery calibrate.
If not, and are still under warrant or have Apple Care, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.

will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.

Welcome to Apple Support Communities
First, when you are going to turn off or restart your Mac, you will see a box called "Reopen windows when logging back in" in the shutdown or restart window. Untick this box and see if the App Store opens automatically in the next startup.
If it starts, open System Preferences > Users and Groups > Login Items, and see if the App Store shows up. If so, remove it from this list

I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund..

I Just bought iMovie for yosmite and the program will not open.. I will like a fix or a refund.. i am getting tired of these problems...

Welcome to the world of downloaded software. There are no refunds.
Back in the good old days when software was purchased on disk one could sell it (legally).
Please describe your problem. Give us some details to go from. Are you using iMovie 06, or something newer?

Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

I just took my new MacBook Pro out of the box and the screen will not work. Display is, black no life to the screen at all

So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all

Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down.

When I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open.

I am using PS 12.1 x64 on a Windows 7 64 bit pc.when I try to open large files that i have created (1.2 gb to 1.5 gb) the ram usage for Photoshop climbs to 4 gb and the file will not open

Machine specs, please. Totallinstalled RAM, scratch disk space, etc
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I purchased a film on iTunes and sync to Apple TV (1) and the film will not play say not authorised please help?

I purchased a film on iTunes and sync to Apple TV (1) and the film will not play say not authorised please help?

This problem seems to have started around October 28, it appears to affect content purchased only on other devices but played on the Apple TV 1.
There have been other workarounds suggested from time to time, but I have found the simplest solution is to purchase something on the Apple TV 1 directly (There may be free content in some locations and this appears to work just as well).
Once the content has been purchased, it will not only play as normal, but will also allow all other content purchased on other devices after October 28 to play as well.
Some have reported that it's necessary to restart the Apple TV before and/or after purchase, but I found it worked without.

My mac has had refresh and install now my password will not work on the hardrive how do i change this?

my mac has had refresh and install now my password will not work on the hardrive how do i change this?

Boot from your install disk and when you reach the Install screen choose Change Password from the Utilities menu.
Also check this Apple article http://support.apple.com/kb/HT1631

HT1491 I purchased a song on iTunes on my iPhone and the song will not download what do I need to do?

I purchased A song off of iTunes from my iPhone and it will not load the song it has been a day and the song will not load. The load bar starts loading and them it goes back to nothing and re starts the download. After a few minutes an icon will pop up and say this song can not be downloaded at this time and has two options retry and done. I don't know what to do, I restarted my phone and it does the same thing.

I'm on iOS 8.1 by the way. I forgot to update my phone information before posting.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

My start up disk is full and the now the mac will not start

Similar Messages

Maybe you are looking for