My startup disc full i tried to clean it but i could not  also i could not empty my trash

i have problem with my startup disk
i wanted to install some softwear but always i got a massege says ypur startup disc is full delete some content from it i tried to  delete some app but still its full
so i check my trash i fined it full with 21 GB i tried to delete it but also i couldnot
so now i dont know how to solve this issue

Make sure that you don't have many login items.
If that trash won't empty, you can do a secure empty but with 21 GB of items it will probably take a long time. Unless you really need something you should probably just erase and reinstall.

Similar Messages

  • Startup disc full message

    I have an iMac G3 running OS10.3, and this last week I have been getting messages that my startup disc is full. I have taken everything off I can, emptied the cache and all trash. The best I can get is 25.2 MB free space, and that will only last for a few hours. How do I get to the startup disc so that I can clean it?
    Thanks for suggestions.

    jltski:
    Welcome to Apple Discussions.
    Unfortunately you do not tell us what model iMac G3 you have, nor the size of your HDD.
    The rule of thumb for free space is that you should have at least 15% of disk capacity free. This allows the computer to function efficiently and avoids directory problems, crashes and consequent loss of data.
    You have three basic options:
    1. You can free as much space as you can. In the article linked by little shoulders there is reference to the utility What Size, which scans your disk and lists what you have on your HDD by size. However, even if you remove a lot of stuff you will end up where you now are before long.
    2. A second option is to purchase and use an external Firewire HDD. These come in very large sizes and generally have speeds up to 7200 rpms. You could partition it and use it for your HDD, as well as for other stuff. However, it has the drawback of not being as portable, which, with a desktop computer should not be a problem.
    3. The best solution is to purchase and install a new internal HDD. These, too, are available in fairly large sizes and are relatively inexpensive. If you get a 100 or 200 GB HDD it will be a while before you run out of space. You will need a 3.5" IDE/ATA drive, and you can very likely install it yourself. Here is a list of drives from OWC. The Seagate drives are highly recommended and come with a 5 year warranty.
    Please do not hesitate to post back with further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

    I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
    Is there anyway to back up this corrupted drive so I can restore my applications later?

    There's an old saying.  If you don't have a backup disc, then there must be nothing important to backup.  That's just lesson #1.  Lesson #2 is to never interrupt a software update.  Not a good thing.
    OK, I'm sure you know this.  It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
    You're pretty much in a bad place.  My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed).  You might be able to see your user folder and some of your apps.  I wouldn't even consider copying the library, because who knows what's been corrupted in there.
    Good luck.

  • Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

    When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

    -Plug your MacBook into a power source.
    -Click on the Apple menu and select "System Preferences".
    -Click on the "Energy Saver" icon.
    -Click on the "Options" tab.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
    -At the top, next to "Settings for:", select "Battery" from the drop down menu.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

  • HT204370 i recently bought a few films from itunes but i had to reset my laptop and the films have gone and i have tried downloading purchased items but no films come up and im not buying them again.  what do i do now to get my films back ?

    i recently bought a few films from itunes but i had to reset my laptop and the films have gone and i have tried downloading purchased items but no films come up and im not buying them again.  what do i do now to get my films back ?

    Did you fail to back up your purchases?
    If so, then they are gone.

  • MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"

    MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"

    Follow the steps here:
    Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

  • .mov file 'converting' causes startup disc full msg

    QT player version 10.3
    OS X version 10.9.3
    I have a 2TB external drive with most of its space empty. I have a set of 15 .mov files (their format is in the screen cap attached at the end of this question) on that drive which I'm trying to open and trim in the QT player. When I open them as a set, each one of them says 'converting' on it and the process takes a few hours. Finally, the process fails and I get a message that my startup disc is full. The QT player is obviously using my internal disc (the startup disc) as the scratch disc rather than the 2TB external (which is write enabled). When I cancel the process, the startup disc goes back to normal size and the scratch files are deleted.
    1. Why is the QT player converting a .mov file to another .mov file?
    2. Why isn't it using the file's location as its scratch conversion location?
    3. There are no preferences in the QT player so how do I set this as a pref?
    4. Is there an alternative app to use for a simple trim operation to a .mov file of this (see screen cap) format?
    Thanks!

    stevens-mbp:~ Steven$ read InstalledLegacyVideoCodecs
    my system showed the exact same list as yours.
    This is the list of "legacy" codecs available to be enabled on your system.
    For stevens-mbp:~ Steven$ qtDefaults read LegacyVideoCodecs
    my system returned no results and displayed another stevens-mbp:~ Steven$ prompt.
    The results indicate you have not enabled any of the available "legacy" codecs while my results indicate that I have re-enabled both Motion JPEGA and Motion PNG for use on my system. (I.e., MJPEG is a handy medium efficiency intermediate codec for editing/conversion in/by QT 7 based apps while the MPNG is an HQ alpha-channel capable codec formerly used by many professional and prosumer level videographers. While I only class myself as a "hobbyist," I still find these two codecs particularly useful on occasion.)
    I'm going to start with the 2008 version of streamclip and see what happens. My task for these clips is actually quite simple: trim off bits of the beginning and end (they're music performances and we just want the performance and not the clapping) and then export for youtube. I'll report back once I get into the project using your great advice.
    Workflow is basically the same for either the free MPEG Streamclip or QT 7 Pro ($29) apps.
    A) TRIM ENDS OF CLIP
    1) Scrub the playhead to the approximate frame you wish to edit
    2) Use right and/or left arrow keys to locate exact frame you wish to edit
    3) Use the "i" and "o" keys to set "in" and "out" edit points
    4) Use the "Trim" or "Trim to Selection" Edit menu option to physically trim content
    5) Save or export the results to a new file.
    NOTE: While step 4 is not really required for MPEG Streamclip, I recommend you use it as different apps can store the resulting file differently causing potential problems in the way QT and non-QT apps handle the resulting content.
    B) TRIM MIDDLE OF CLIPS
    1) Scrub the playhead to the approximate frame you wish to edit
    2) Use right and/or left arrow keys to locate exact frame you wish to edit
    3) Use the "i" and "o" keys to set "in" and "out" edit points
    4) Use the "Cut" Edit menu option to physically remove selected content from the middle of your clip
    5) Repeat steps 1 thru 4 as needed
    6) Save or export the results to a new file.
    NOTE: This approach is handy for removing things like commercial segments from the middle of broadcast recordings.
    Good Luck!
    Thank you for your service.
    My pleasure.

  • How to make room when startup disc full?

    I have been getting pop-up warnings that my startup disc is almost full or full. It says to delete files but I don't know how to go about this nor do I know what is safe to delete. Would someone be able to help guide me through this?

    More info overload.....
    Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
    http://www.youtube.com/watch?v=fO-mlLApEuk
    Empty the trash in the Dock as well as iPhoto’s trash!
    Open up your application folder & go through all your apps.  Trash all the apps you no longer want and/or use.
    An easier way to do this is to open the Application folder in list view & press the Command+j keys.
    In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box.
    Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
    Get rid of all your photo files you don't want and/or need.  Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).  Or transfer/move them all to a photo/movie storage site like ImageShack and Photobucket, 2 of the most popular  FREE  storage sites.
    Get rid of all your video & music files you no longer view and/or listen too.  Especially, if you already have the actual CD/DVDs or you can later redownload from a website.  Or transfer them all to a FREE video/movies and/or music storage site.
    Use Spotlight to make sure you got rid of everything.  You can even trash directly from Spotlight!  Better yet, download this FREE software called Find File.  This app puts Spotlight to shame (works w/Mountain Lion).
    Drag what you don't want and/or need to the trash.  Better yet, download this neat little shareware app *demo* called AppZapper.  It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
    Another software that does the above is AppDelete.  Best of all this software is free!
    Burn what you want and/or need onto CDs or DVDs. Not everyone has the  luxury of purchasing an external HD and/or the system requirements for iCloud to store their "stuff.”
    Dropbox is a free storage utility to check out.
    You can check with your ISP to see if they offer *free* storage space.  Most if not all do now-a-days.   There are thousands if not millions of *free* storage facilities on the web also.  Use your favorite search engine to search them out as they come in different storage sizes to fit your needs & wants.
    Check for duplicate fonts.
    Applications>Font Book
    Select “All Fonts”
    If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
    To clean this up, select a “black dotted” font or the Apple + *click* to select multiple dotted fonts;
    Edit>Resolve>Duplicates.
    What the above does is turns off the duplicates & multiple version fonts.  Not delete them.
    More than likely the “extras” were installed by other programs and/or other users.
    Clear out font caches
    Use FontNuke.  It does all the work for you.  And, best of all it’s *FREE*.
    Printer Drivers
    Get rid of all the printer drivers you don’t need & use except the ones for your *current* printer(s)/scanner(s).
    HD>Library>Printers Folder
    If you accidently threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
    Garage Band
    Has about 1GB of loops stored.  Get rid of some some them.  You surely don’t use, like and/or need them all.
    HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
    Or just get rid of the Garage Band app altogether if you don’t use it.
    Get rid of extra languages
    Strip your computer down to your “native” tongue.
    You can do this with a *FREE* utility called Monolingual.  Another app that apparently does all the work for you.  I’ve never used it.  However, a lot of users here swear by & recommend it highly.
    However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
    Other Resources:
    HD Space Checkers:
    Disk Inventory X (FREE)
    WhatSize (SHAREWARE)
    OmniDiskSweeper (FREE)
    GrandPerspective (FREE - donation)
    ==================
    Mac Performance Guide
    Slimming your hard drive
    Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

  • Startup disc full after file transfer from old mac

    Hi everyone,
    I had a Macbook pro that was about 6 years old until I bought a new Macbook Air. I tried to transfer my files via the migration assistant but it didn't work, so I backed everything up onto an external hard drive and then transferred everything via that onto my new macbook air. All the files saved onto my desktop in a file called "Olivia's MacBook Pro", but none of the files are directly linked to my new air (i.e., I can access my old pictures through my desktop but they aren't in my new iPhoto). The issue I'm having is that I often get a popup that says my startup disc is full. I followed directions on old threads that said to download omnidiscsweeper, which I did, and all the room is being taken up by that folder of all my old stuff on my desktop (~185 GB).
    My question is- do I just have too much stuff? Is there a way to keep my pictures and such on my new computer without always getting this error message and having to shut down different applications? Please help! I am not very computer savvy
    Thanks so much for reading.
    PS- appx 76 GB of my computer storage is movies...but I don't have any movies saved on here that I know of... another 72 GB is "Other".
    Thanks!!

    Frankly, You'll probably waste more time and effort than if you just got a Firewire cable. I'm pretty sure you'll need to have a cross connect Ethernet Cable (I usually make my own, not sure where you'd buy one) to connect them via ethernet, and even then you still have to mess around with getting them to talk to each other. Other option is to plug both computers into a hub or switch, or better yet a router.
    Another option is to spend $20 on a usb adapter that can connect any drive to your Mac. [Here is one that I have|http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo =2329300&CatId=3770] from Tiger Direct that works quite well.

  • Startup Disc Full

    My iMac is giving me the message "startup disc is full" but I don't know what to do about it.  Any ideas?

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data.
    Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click the line of text below to select it, then drag or copy — do not type — into the Terminal window:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Press return. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • Macbook Air - disc full message even after cleaning

    I got the disc full message so I saved everything on to a flash drive and deleted every video, picture, and word document that I've ever created. Also some application I do not use. My computer was acting slower around the time I got the original 'disc full' message. After clearing everything off, including itunes. My computer was still running slow, with long loading times online. I downloaded the new Maverick operating system and my computer is running back at normal speed. However, I can only save a few documents before I get that same 'disc full' message. I checked my 'about this mac' and under storage it says there is a total of 3.3GB free out of 120.47GB.
    I'm no computer expert, but shouldnt I have memory at least to save a bunch of documents?
    I'm a student and I'm always saving notes, word docs, pictures for power point. I need this extra room asap. flashdrives are nice but I can work more efficient with my flashdrive cooperating.
    Can some one please help me out?

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • Trying to update itunes but getting error message bonjour.msi can not be found

    Trying to update itunes but keep getting an error message ..... bonjour.msi file missing ? Anyone having this problem and if so how do you correct it?

    i get the same message and am going crazy trying to fix it.mine gives me the option to search for this file, but i can't find the file.itunes then forces me to quit instalation at this point. when i try to un install itunes, it won't let me, HELP

  • Trying to buy music but the question that is provided is not the question that I provided

    i have a mac pro iso and i am trying to buy music but i can not because the question they are asking i did not provide i need to get into my security so that i can right them down so i can buy music

    Sheila,
    That is impossible for us to answer, since you did not say where you are trying to buy music.
    If one online music download store is not working for you, try a different one.  Here are some suggestions:
    iTunes Store
    Amazon Digital Music
    Google Play Music

  • My startup disk is full:  how do I clean it up?  Simply deleting some files does not help.

    I get the message that my startup disk is full. It says to delete some files to make more space; but after deleting some files, this message will reappear again after a while.  What else can be done?

    I hope you haven't removed anything that involves the system.
    I hope you haven't remove things willy nilly, either.
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Why is my startup disc full?

    I have a MacBook, and I use iMovie a ton. Like a LOT (I'm on YouTube)
    I keep getting notifications saying my start up disc is full, and I'll delete some stuff and it helps a little bit. But then it comes back!
    I've deleted as much as I can (there is barely anything on my computer), and I don't know what to do.
    Please help!

    Hello,
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    This will clear several Cache files.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    DVD sized files take up huge amounts of space.
    How much free space is on the HD, where has all the space gone?
    OmniDiskSweeper is likely the easiest/best, and is now free...
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
    http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/
    Also...
    Open Console in Utilities & see if there are any clues or repeating messages, making huge log files.

Maybe you are looking for

  • Problem with 3D and Modify selections

    Could someone help? When I first installed CS5 upgrade on Windows 7 from CS3, the 3D option was availbale. It has now disappeared. I had added the mystical (AutoFX) plug-in and fearing that was the culprit, I uninstalled and have not installed it aga

  • Problem accessing SQL Developer with user sys

    Hi Experts; I'm working with Oracle 10G, in Solaris 10, The DB apparently is working properly, but I can not access the DB thru SQL Developer. When I try to acccess with user sys, and I enter de password, in oracle role I select sysdba, when I choose

  • Use of planning characteristics vs navigation attributes in APO DP

    I am using APO DP V5. I have a product characteristic. Products are grouped into 'product groups'. I want to be able to run stat forecasts at the 'product group' level, and also adjustments via key figures at the 'product group' level. For the 'produ

  • HT201371 There is no longer a TouchID item on my 5s - why? How to get it back?

    I used the TouchID then started to use only a code. Now after a while there no possibility to create a TouchID What to do?

  • Creating URL to WSRP Portlet in wsrp:solo windowstate

    Hi, I would like to create a Portlet URL in <b>wsrp:solo</b> window state to the same portlet. Is there any suitable tag available in weblogic portal. I am using weblogic portal workshop to create the WSRP remote portlet . Can I use JSP based WSRP re