My stereo speakers are not working properly

Model is HP Pavillion m7-1015dx with Windows 7. No error messages but my sub woofer is not recognized.  Any suggestions?

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Similar Messages

  • My speakers are not working properly.

    my speakers are not working properly.the speaker dosent work with music and the keypad clicks,but speakers work fine with siri and voice memos even the speakers work fine with ringtones .how is it possible?

    "Speakers" - there is only one speaker on iPhones
    Restart the phone.

  • My laptop speakers are not working properly so wanted to visit service centers of hp in london

    from yesterday night my laptop HP pavilion g6 speakers are not working properly. out of many only one speaker is working so i want to visit authorized service centers so that i can fix the issue.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56001-56500/sp5646​0.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has had any effect on the audio issue.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My speakers are not working but it still makes a sound when it boots up

    my speakers are not working but it still makes a sound when it boots up.

    Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article.
    2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    3. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    4. Reset the NVRAM.
    5. Reset the SMC.
    6. Reinstall OS X after backing up all data.
    7. Make a "Genius" appointment at an Apple Store.

  • Pavilion a6303w speakers are not working

    After having to completely remove all files from my computer, due to mechanic systems program. I reinstalled my computer to it's factory settings. I am unable to download my backup disks as well as my speakers are not working. I have checked the Audio and everything is up? Can anyone help me with how to get my audio back?

    When you say "I checked the Audio and everything is up", does that mean that you checked all of the settings in the Control Panel/Sound module?  You should assure that you sound device is set as the default.  Also, check all of the settings one by one to assure that they are checked properly.  Then, update the driver.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HT4061 my i phone vice speakers are not working

    hi, I have one  I phone 4 and one  I phone 3s. Both phones are not working properly because of vice speaker.

    iPhones do not have vice speakers, therefore there is no issue.
    If you'd like to clearly define what the problem is, maybe we can offer some assistance.

  • My laptop speakers are not working but my headphones work fine

    I have an HP Pavilion g6-1d73us laptop and although my headphones work properly the speakers do not. This is a recent problem.  I have tried troubleshooting with windows troubleshooter with no results. I have checked all the drivers for audio and they check out fine. I have tried driver software with no success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl
    This question was solved.
    View Solution.

    Hello @hifive11,
    I have read your post on how your notebook speakers are not working, but the headphones work fine, and I would be happy to assist you in this matter!
    The first step I recommend is to follow this document on No Sound from the Speakers (Windows 7). This should help to restore the sound to your speakers. 
    You can also enable the speakers on your computer as the default playback device. This can be done by following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's headset device). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Test your speakers
    If the issue continues, I recommend returning your notebook to a previous restore point before the speakers stopped working. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I phone 5S 32GB Silver's External Speakers are not working.

    Model - Iphone 5S 32GB Silver
    IOS - 7.0.6
    Problem:
    I have Recently bought Iphone 5S 32GB model & was using it wisely. Since Yesterday I have realised my Phones External speakers are not working. all other features of the phone are working properly.
    Solutions Tried So far:
    Silent Mode On/Off
    Restarting Iphone
    Reset All Settings
    Complete Iphone Erase
    Please post if anyone else is having similar issues or have solution of this problem.
    Krupal

    No it shows "Volume" not "Headphones" when I try playing music via external speakers & trying to  adjust volume.
    I have noticed one thing.
    When i tried pushing/rubbing (Gently Not too Hard) bottom right front side of my Iphone ( exactly right side to Home Button) my speaker started working again for some time.
    when it stoped again i applied same method.
    Is this some kind of loose connection ?????

  • My front speakers are not working.

    I have a laptop HP Pavilion dv7-4180ea, Core i7 1.60 GHz, ATI Radeon HD 5650 1 GB, Windows 7 Ultimate x64 with 4 GB of RAM.
    The problem came up after I reinstalled the windows about one week ago. After I downloaded the driver from HP Drivers and Support things didn't seem to work as they did before. The front speakers are not working anymore now, only the subwoofer works and it sounds awful. Is there any other driver I need  to download or something? Thanks in advance.

    Hi here. Use a Mini Display Port to HDMI cable and connect the HDMI into HDMI input on the receiver and the Mini Display to the Mini Display Port on your Mac.
    - Go to System Preferences on your Mac. Click on the "Sound" icon. Then in the "Output" tab, select "(your speakers) - HDMI
    - Then go into Applications via finder > Utilities > Audio MIDI Setup. On the left side of the window select HDMI. On the right side it then should say "Source: (your speakers)"
    - Click the "Configure Speakers..." button in the bottom right of the window. Click the "Multichannel" tab. Then select "5.1 Surround" from the pull down menu. Click on each speaker to provide a test tone to make sure each is connect properly. Then click on "Apply" if there is no 5.1 option e.g it's greyed out use options 48000.0 HZ and 8ch-16bit Integer. You can then select Configure Speakers, Multichannel and 5.1 Surround from the drop down. When testing the speakers you may have to use the drop downs under each speaker to change the numbers for which speaker is where. Good luck :-) hope it works

  • HP Pavilion Entertainment DV7 1240 Speakers are not working

    Has anyone else had this problem the tool bar at the top of the notebook is amber and the speakers will not play, if I plug in a headphone they work.  I can not seem to find the correct version of drivers to make this work.  Any help?  Would really like to have my speakers working again,
    Thank you
    PMR.

    Hello Rick_of_Jonghap,
    I understand that the speakers on your notebook computer are not working properly, and I would be happy to assist you in this matter!
    To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 7). This should help with the playback on your system.
    In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
    For more assistance, I will need to know:
    1. If your computer has completed all of its important Windows Updates.
    2. If you have updated your HP drivers using the HP Support Assistant.
    3. If this is an on-going, or recent issue.
    4. If plugging in headphones produce the same problem.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards   
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

    After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
    This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
    I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
    Kindly solve this issue ASAP.
    Shailendra Gupta
    <edited by host>

    You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
    Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
    If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

  • My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

    Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

  • Why the games are not working properly in my ipad after installing iOS7

    Why games are not working properly in my ipad in my iOS 7

    The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
    Regards,
    Steve

  • Hi there, Fn + F1 to F12 special features are not working properly in bootcamp Windows

    Hi there, I m just wondering recently my keyboard special features keys are not working properly(fn   F1 to F12). Is there any solutions for this?? For example I cant switch the brightness with fn   F1.. THis is so troublesome.... Please help! thanks
    This was working fine in the early stage until recently which is not functioned properly.. ANy way to fix this up?? Thanks!

    I had tried them...but its all good now... Guess RegPro must be delete my bootcamp item..So I just redownload them n reinstall...all back to normal!...THANKS!

Maybe you are looking for

  • Parameters for BAPI_ACC_GL_POSTING_CHECK

    Hi all,    please help me.i am not able to pass obj_type and obj_key in the structure BAPIACHE08.what value i have to pass if i am using IDES version.i have seen a solution if the version ECC 6.0.they used BKPFF.what is this.why they using BKPFF.plea

  • Converting Dynamic ECG to Arrays

    Hi, im new to this forum and LABView program. I am doing an HRV analysis using LABView for a project in school, with the help of the NI developer's Zone HRV guide. All are good while using a static .txt array for the input, but now i need to get a dy

  • Trouble converting RAW to DNG from Nikon D90

    Hi, I'm using CS4 and have uploaded the latest Adobe DNGConverter, 8.7.1 and still my raw photos taken with my Nikon D90 don't convert in Bridge or Photoshop. Anybody have ideas for what to do? Take care, Paul

  • Unable to export vcard

    Hi, I'd would like to back up my contact in icloud, however no vcard created when I select "export vcard" Appreciate your assistance please.  Thanks Regards, Jenny

  • Continue not working

    Hi Experts, In while loop; i am trying to use continue / or CONTINUE when eg: CONTINUE when N_BILL_GROUP_ID IS NULL; or IF N_BILL_GROUP_ID IS NULL THEN CONTINUE; END IF; But i am getting error "Encountered the symbol "WHEN " when expecting one of fol