My still photos won't all show in my movie

My movie has both still images and video. However, i movie gets stuck on the previous video clip in playback and the sequence of still photos won't appear. I've not had this problem before. Any ideas?
Thanks

What system are you running and what version of iWeb? What happens when you try to launch iWeb? What do you see?
OT

Similar Messages

Won't transport photos- they're all scrambled

I'm a long-time user of iMovie but this has me baffled... if the picture is larger than say 200kb or so the photos won't transport normally into the movie as they're all scrambled. I take photos at about 1704 X 2272 yielding about 1.2 Mb and these photos are all scrambled and won't transport into my movie. Any suggestions from those that like a challenge?

This has been affecting some folks for the past while. Having the Library on an external seems to be part of the issue.
Have a read of this thread
Yosemite, iPhoto 9.6 upgrade, large photo library is not recognised.
there's a post by Zaxe on the second page that has a fix. Worth a try.

Camera still photo issue

It seems there is an issue with OS4 displaying the photos improperly when transferred or emailed. Still photos won't display properly when taken in portrait (upright). They look and display properly on the iphone itself, but not when emailed to someone. They display rotated (sideways). See for yourself
http://www.youtube.com/watch?v=As0QeKNaQCY

I took four pictures, one from each of the four rotations of the phone, and emailed them to my gmail account.
In the phone, they all displayed upright.
In gmail in IE, they all displayed upright.
In Outlook, only the pic taken with the phone rotated 90 degrees counter clockwise was upright. The other pictures were displayed with varying rotations.
I think it's an issue with the mail client.

Why won't iMovie 10.0.01 show any still photos?

On the new iMovie update, every single time I add a photo to my timeline, it shows up green! Why won't it show any still photos? Does anyone have a solution?

Are the photos too large of a file maybe?

I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

Two issues on Aperture: single photo won't show in viewer, emptied trash won't indicate as empty

Using Version 3.5.1. Several after-market edit plug-ins attached. Two new problems:
Very recently, when editing, the single photo viewer mode will start showing only black (blank), or shows the photo very briefly then goes black, or shows another different photo, or a damaged-looking photo. Multiple photo viewer modes still work ok. Problem goes away upon quitting and restarting Aperture, but then shortly soonafter recurs while editing.
Also, trash continually indicates 477 undeleted photos even after emptying. Additional photos added to trash get added to this count (i.e. it then indicates, say, 492 photos in trash, while showing only the actual 15 legitimate files in the trash folder), and then can successfully deleted the actual trashed files back to the mysterious 477, although with no photos actually left in the trash folder and the Empty Trash function still active for these 477 ghost files. This problem persists despite restarting.
Any suggestions greatly appreciated.

Problem goes away upon quitting and restarting Aperture, but then shortly soonafter recurs while editing.
First of all, make sure you have a current, working backup of your Aperture library.
Is your Aperture library on your system drive or on an external drive? If external drive, how is the library connected? And is the library referenced or managed?
Several after-market edit plug-ins attached.
Have you checked, if your plug-ins are the latest versions, and compatible with MacOS X Mavericks?
What trouble-shooting measures have you already tried? If you have not already done so, use the Aperture Library First Aid tools and repair the permissions and the database, see this page of the Aperture User Manual: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Post back, with more information.

Photos won't show up in camera role & forever backups. Please help!

This has been going on for 3 months now and its really becoming a pain. The problem in itself is now a giant conundrum where I can't find a possible fix so here it goes!
It all started when I noticed that when I took a photo with the built in camera it would save it to the thumbnail but when you go to view it, it would not be in the camera role, though they all show up in iPhoto just fine . I understand that this is a problem had by many and its nothing new, and there are ways of fixing it but below is where the problem gets tricky.
As soon as I connect my iphone to the computer to sync the phone in order to find the BAD CACHE or whatever, The device goes into "backing up iPhone" mode (even after I've checked the manually manage music & video's box") This would be no problem if it would actually back something up but it dosen't. One time I actually left it alone to backup over night after it had already taken 4 hours of of my time sitting there watching the endless loading lines pass (it didn't even get to the part with the solid bar that shows progress) I checked it the next morning and it was still loading. After 13 hours for a single backup I called it quits and gave up. I've tried many times after hoping that it might fix itself, but each time it gets stuck in the "backing up" phase.
I know you can just restore it to factory settings for problems like this, but I can't, without losing all the stuff I've purchased that I can't sync to the computer because of the backup problem.
Can someone please walk me through a fix (where to look for the bad info caches or something) that dosen't include losing everything via a reset. I'm at my wits end with this problem and would really love if someone could help.
FYI, My phone is a 3GS and I have NOT updated, mostly because I can't. The software I believe is from the 3.0- 3.0-1 (I'm not sure which) It was the software that came with the phone that purchased back in August 09.
3GS

1) Turn off auto sync: go to itunes, Edit, Preferences, Devices, "Prevent syncing of...."
2) At the same place, youll see a list of all the backups. You can highlight and delete the ones you think are bad.
For the camera roll photos, you need to upload them from the iphone camera roll with iphoto (not a sync) as you would a digital camera, but turn off autossync first.
Once you have everything organized, you can try a restore and sync (in that order). But all your content must be on the itunes-equipped computer first.

Photos won't show up in camera role & forever backups.

This has been going on for 3 months now and its really becoming a pain. The problem in itself is now a giant conundrum where I can't find a possible fix so here it goes!
It all started when I noticed that when I took a photo with the built in camera it would save it to the thumbnail but when you go to view it, it would not be in the camera role, though they all show up in iPhoto just fine . I understand that this is a problem had by many and its nothing new, and there are ways of fixing it but below is where the problem gets tricky.
As soon as I connect my iphone to the computer to sync the phone in order to find the BAD CACHE or whatever, The device goes into "backing up iPhone" mode (even after I've checked the manually manage music & video's box") This would be no problem if it would actually back something up but it dosen't. One time I actually left it alone to backup *over night* after it had already taken 4 hours of of my time sitting there watching the endless loading lines pass (it didn't even get to the part with the solid bar that shows progress) I checked it the next morning and it was still loading. After *13 hours for a single backup* I called it quits and gave up. I've tried many times after hoping that it might fix itself, but each time it gets stuck in the "backing up" phase.
I know you can just restore it to factory settings for problems like this, but I can't, without losing all the stuff I've purchased that I can't sync to the computer because of the backup problem.
Can someone please walk me through a fix (where to look for the bad info caches or something) that dosen't include losing everything via a reset. I'm at my wits end with this problem and would really love if someone could help.
FYI, I have NOT updated, mostly because I can't from the 3.0- 3.1 (I'm not sure which, but its the same software version that came with the phone back in Augest 09).
Message was edited by: tinastar1

Can anybody help?? or have any suggestions.

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

Some of my photos are not displayed in events. The event is there and still named but photos won't display. Suggestions?

Some of my photos are suddenly not showing inside the event. The event is still present as well as the title and number of photos in the event, but the photo is not showing. I get a black thumbnail with a dashed white box inside it. Any suggestions? It has not happened in all events, only a handful.
Thanks

That's an indication that the link/file path to the original file has been broken. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

My events photo albums have all been renamed with a number followed by IMPRT instead of the date which was how they were originally named. Also the photo now showing on the top of each folder is not actually in that folder. How do I restore?

My events photo albums have all been renamed with a number followed by IMPRT (deleting the date on which they were taken) Also the photo now showing on the top of each folder is taken from a different event and so is not actually in the album it is sitting on top of. This happened when I linked to itunes. Any idea how to restore it to how it looked before?

One thing that I find odd is that iTunes used to rebuild the .itl file when you deleted it. It seems as if the newer iTunes somehow broke this old capability. If you delete the .itl file it can't rebuild it- it simple treats this as if this is a fresh installation and completely ignores the fact that the .xml file has all the data in it. I think Apple needs to bring back this old "feature". Of course, the negative with that was that you lost all of the "Date Added" info along with some other stuff but at least it still kept the favorites info etc. (and I think maybe even the path although I don't believe I ever tried that because my account path has never changed until now).
One side note: I can't find where the iTunes Windows SDK is. I was hoping to try to use that to access the .itl "database" and write a utility to fix this situation. Seems like this has moved from its original location...

Imovie 9.0.9 will not show some of the still photos in project

when working on a imovie 9.0.9 project, some of my still photos from iphoto are not showing up in the project. I can drag the photo over and it appears in the project window but when I play the project some photos do not appear.

I have the same probelm with OSX 10.8.5 and the latest iMovie 9.0.9. iMovie will see most of the pics in the window but, infuriatingly, not some of the others - taken by the same camera on the day day!
The ones it can see, I can drag to the project window - get the green line, add or insert as appropriate and some will show when I play the new segment, and some won't. Some show in the project time line, but don't show up in the viewer when the line passes over them.
I have tried finalising, closing and opening both iMovie and iPhoto, deleting the pics in iPhoto and re importing them. I have been working on this for almost TWO DAYS and it's infuriating because nothing seems to be effective in fixing it, and there is no predicting as to which pics will "stick" and which one's won't.

Still photos disappearing and showing up in random order?!

Hi,
I'm trying to add a series of still photos to my iMovie project, and while they're appearing correctly in the project map, they either disappear or appear in a random order when I play back the movie. Oddly enough, if I play it back a couple of times in a row, it'll pick a different random order to show the photos...if it decides to show anything at all. I don't seem to be having the photo duration problem that other people seem to have (knock on wood), but this seems really weird. Is there a setting I'm missing?
Thanks in advance for any help!
Mardie

I may be mistaken, but it appears that you are trying to add stills to an iMovie Trailer template. Unfortunately, the Trailer templates only allow the insertion of video clips. The way around this limitation is to convert the Trailer to a normal project, then you can add stills and/or edit the project in the normal way. At the points where you wish to add stills, just leave the animatics in place. When the Trailer is converted, simply replace the animatics with your own stills.
To convert the Trailer, go to iMovie's menu and select File>Convert to Project. It's best to duplicate the Trailer first. To do this, in Project Library view, right-click (or Control-click) on the name of the Trailer. From the pop-up menu select Duplicate Project, then convert the duplicate to a normal project.
John
Message was edited by: John Cogdell

Reset - Set New Default For Length Of Stills/Photos -Same Parameter For All

Hi Gang
Just need a jump start to resetting the length of time for Video in the Browser. I'd like this new parameter, (5 Seconds), to be used for all Stills/Photos inserted on the timeline.
It's for a simple slide show
Thanx
Mike

Hi Gang
Sorry I posted this - I had a brain freeze
Mike

I have bought pages and it all was going well until I downloaded the update. Now my files (which are mainly brochures) won't show the pictures in opening screen. So I have over fifty documents and they all show the pages logo on them instead of the pics

I used pages for brochure documents and copied pictures to them, after I downloaded the upgrade the documents only show the pages logo on the pages from the opening screen. Once you click on them the pictures appear but it takes me ages to do this so they all show. HELP

Tupelo, there are many, many threads here in the Apple Discussions about the many issues with Pages 5, and the multitude of features that have been lost in this supposed "upgrade." Like Jerry, I'd recommend you get yourself back to Pages 4.3 until Apple comes to their senses.
So...first off: do you have Pages 4.3 still installed? If you do, it will be in an iWorks '09 folder in your Applications folder. If you bought Pages 4.3 on its own from the App store, your copy of Pages 4.3 will have been overwritten by the new Pages 5.
If you don't have the iWork '09 folder in your Applications folder, do you have a backup with it installed there? If so, you'll want to revert to that version. I believe that you can drag and drop the older version of Pages (and Keynote and Numbers if you have those as well); I'd recommend that you create a folder called "iWorks '09" in your Applications folder and stick them in that.
Also, if you have a reasonably current backup, you will be able to recover your documents created in Pages 4.3. Whatever you do, do NOT open them in Pages 5 - once you do, the features you may have used will be gone and reverting won't recover them.
You may also be able to revert to earlier versions, once you get Pages 4.3 back on your HD/or locate it and so you can use it to open Pages documents. In order to try that, in Pages 5, go to File->Export->Pages 4.3 document and then close Pages 5, and open Pages 4.3. Open the document you just exported. Now go to File->Revert and see if you can find an earlier, pre-Pages 5 version. If you can do that, you should be able to fairly painlessly recover all your messed up docs. Of course, if you have a current backup, it may be faster to simply recover the undamaged originals from the backup.
Pages 5, if installed on your system, will be the default for opening all .pages documents. You therefore have to do something to prevent that (Get Info and Change All won't stick). Either move Pages 5 entirely off your HD (and to move it, you'll need to put it into the trash first, as simply dragging it somewhere just creates an alias - once you drag it into the Trash, you can drag it to an external drive, for instance) OR you can create a disk image by sticking it in a folder and then using Disk Utility->File->New->Disk Image from Folder. Toss the Pages.app (v 5) in the trash and then any time you want to open Pages 5, simply click on the disk image. It turns itself back into a disk image when you quit. And it won't be the default app for .pages docs when it's a disk image. Or you can simply toss Pages 5 in the Trash entirely. The only reason I've kept my iWork 2013 apps as disk images is in case Apple actually does upgrade them to recover the lost features and perhaps changes its freebie policy along the way. Or...someone might send me a Pages 5 document. They can't be opened in Pages 4.3, so I'd need it then.

My still photos won't all show in my movie

Similar Messages

Maybe you are looking for