My store wont load its just a white screen with itunes store in the middle
my store wont load its just a white screen with itunes store in the middle... anyone pls help!!!!!
Same Here!
Similar Messages
-
STUCK on white screen with battery icon in the middle with RED LIGHT
I have BB curve 8900 and my BB shutdown by itself yesterday and it wont start on again !
so i charged it the red LED start to show and white screen with battery icon in the middle it looks like empty battery, and stuck on it and sometimes it keeps spinning over and over again until it bcome black screen then it starts the same begining !
I tried the hard boot by taking the battery out for sometime and reinstalled it but it didn't work. I even try putting a different battery (friends battery) but still no joy..
and the main catch is if i try taking out the battery and plug the charger or connects it to the laptop it does the same thing without even any battery in it.
So is it really a Battery problem or the OS problem.?? (If its a OS problem, can u install it myself at home.?
Waiting for the reply
Thanks
Jasdeep Jollyjasdeep_jolly wrote:
if it does not boot then..??
Well, you need to do as suggested first.
Then, if not: If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
White screen with grey stripe down the middle. What does this mean?
white screen with grey stripe down the middle. what does this mean?!!
Nope, Happen when I was in the middle of texting. 40% battery life too
-
TS1702 my itunes store app wont work its just a white screen, wont search for anything?
My itunes store app has stopped working, its just a white screen, nothing loads up?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
PLEASE HELP!Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?
-
Re: My blackberry 8310 has a white screen with a box in the middle?
hey im having the same problem. my phone is the curve 8330. i know its kinda old but, still it was a good one and i dont want it to die on me. when i turn on the phone i get a box or like a window with a circle then a square and a triangle in side it. the background is white for the scree. and there is a circle around it having it crossed out like a no sign. i tried what u said but my computer wont detect it. pls help me out.
Hi and Welcome to the Community!
Depending on what occurred just before this behavior started, your resolution choices may be different. So, here are some guesses, since we don't know that information...
KB32814 After completing an Enterprise Activation the BlackBerry smartphone reboots to blank white screen
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My ipod restarted while sofwear update .now its just showing white screen
my ipod restarted while sofwear update .now its just showing white screen...now how can i start my ipod...
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black
Hey there mtriest,
It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
There is additional information in the article with further troubleshooting if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.
I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
my iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either. It's been like this for about two hours now.
Hold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/ -
ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
Hello,
This will fix your problem!
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
That should get you back on your way.
~Lt. Leviathan -
i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Help! Cannot connect to iTunes Store. Only thing shows up is white screen and iTunes Store words appear.
Hi Davin12,
Here is an article with some troubleshooting ideas for when you are not able to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care,
- Ari -
My iPod has a white screen. After holding down the middle and menu button, the screen goes black then back to white and beeps twice. I have returned to original settings and resorted content to no avail. I still have a white screen. I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.
I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.
-
Movie has just a white screen with sound, how do i get full video
I have a movie on my computer (not purchased) that I want on my iPod Touch and I put it into iTunes. I had to convert it to iTouch, and that had troubles at first, but then it started to convert, when it did, I got sound and just a white screen in both iTunes and on my iPod. The entire movie plays perfectly on iTunes..... what's going on? It's James Bond, so you can understand how much I want this on my iPod....
Try this. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
Maybe you are looking for
-
Thunderbolt Gigabit Ethernet Adapter doesn't work
Just plugged in a Thunderbolt Gigabit Ethernet Adapter into MacBook Pro 15" 2.7GHz i7, OS 10.7.4 It is recognized correctly by System Profiler, but not in System Preferences - the Adapter just isn't shown in Network. What is still needed? Thanks for
-
The problem is that my mac is working very well, in soft programs, like browser or text editing, and then stop. Stop for one eternity, until i do a hard shut down. After this situation apper´s many times, in a single day, i went to a apple service st
-
How do I purchase a serial number for a downloaded copy of Lightroom 4.4?
I downloaded this for my my course and used the trial. Now I ant to buy a serial number but cannot get to the right page. Can anyone help?
-
Defining what Aperture regards as a 'new' file.
If I import referenced file from a directory, then something changes the mtime of that file, Aperture regards it as a 'new' file and I end up with what appears to be two masters identical in appearence with the same file name. The behaviour I expecte
-
Is Using the Automatic Update for Flash Player Safe? It is Installed In System Preferences On My Mac
Hello- One day I noticed that there was an icon on my MacBook Pro of Adobe Flash on the last row of system Preferences. I had never seen it before, and I had ben using Flash for a long time and updating it regularly. It recently told me there is a n