My sub works but no sound plz help audigy

i have audigy 2zs and 5. sicuro all works but sub

Go to the EAX panel and shut off all effects, then run the speaker tests. Also, I found (Using an O-scope checking the voltage levels of a properly terminated channel) that the output voltage level of the subwoofer channel is 20% of the other 5 channels.
My solution was to spend $50 and buy an ARTcessories HEADAMP and some cables/adapters to give it some gain. Even with the?HEADAMP maxed, I'd like more so I could shake the floor apart with my 0W RMS/CH Peavey amps and JBLs. Very close to happy.
Got some 60 cycle hum out of the 2zs card (very, very low) I can't get rid of though. Even after attaching EVERYTHING (but the mouse and keyboard) to the master grounding block for the entire house with individually run #0 wires. Even when the PC is off. Interesting.

Similar Messages

HT1491 I'm trying to recover it .....but it's not working ....plz help me what shoud i do now?

I'm trying to recover it .....but it's not working ....plz help me what shoud i do now?

What error are you getting?

I dropped my iPhone 4 in the sink where it was submerged in water for not even 2 seconds I took it out and put it in a warm room by the radiator and most of it works but no sound and battery length is short and runs out quickly. Any ideals on how to help?

I dropped my iPhone 4 in the sink where it was submerged in water for not even 2 seconds I took it out and put it in a warm room by the radiator and most of it works but no sound and battery length is short and runs out quickly. Any ideals on how to help?

$149
They do not repair .Apple exchange and all returned units are refurbished at The Apple plants in China
So you get a device that looks like and functions like new
Are you familiar with the results of water and electricity mixing

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

HT5517 video is working but no sound in airplay

I have an Apple Tv both 2nd and 3rd generations. My vidoe is working but no sound when trying to play a video from my Iphone. I use Airport express for wi-fi. I am able to do everything else with Apple TV.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    3.    Restart the Apple TV (Settings > General > Restart).
    4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    5.    Restart your router.
    6.    Restart your mobile device.

Cannot connect to iTune store... even after the internet connection is working fine... plz help...

cannot connect to iTune store... even after the internet connection is working fine... plz help...

Same here, also cannot access the App Store. Internet connection is good. Iam on a Mac

Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks

HI
i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
plz help me to solve this problem

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

App Store Is Not Working ??? plz help

Hey guys I updated my iPod (4th generation) to iOS6.1.2 about 2 weeks ago but suddenly yesterday my App Store stopped working. When I open it it's all blank in features,search,etc?? Plz help how can I make my App Store work ??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Speaker works, but no sound when using iPhone handset and no typing sounds

Hello, This is the 2nd time this has happened to my iPhone in the last month...
When I type a text message, lock the phone, slide to unlock the phone, start up the phone, use the iPhone itself to talk to someone on the phone, etc - the sound does not work...
It does work using the bluetooth headset and it also works on speaker phone (I am able to hear my calls). The ringer for my alarm clock works, but not when someone calls me. The ipod is not working either - I am unable to hear songs.
The silence switch is not turned on (on the side of the phone) and I've checked the other settings as well... I also restored my phone last night hoping that might work and I've reset the settings on the phone as well...
Can anyone please help me with this issue?
Thanks!

Did this occur after using the earbuds?
Try inserting and removing the earbuds several times in a row.

JVC KD-R200 Radio works but no sound?

Help! Just installed this receiver from BestBuy.com JVC KD-R200. Install went well deck worked great for a day. Took faceplate off and next day put it back on. All the lights and visible power indicators came on but no sound. There is a slight audible pop when the face plate is put on but nothing else. Any ideas?

Jamesr –
Thanks for posting on our forum. Unfortunately, I would not know how to address your concerns. I do not know much about the technical end of decks. I would recommend you contact JVC if we did not install this for you.
JVC
800-252-5722
You can contact your local store as well and speak to a Geek Squad Auto-Tech and see if this is a common issue with your model vehicle or deck.
Thanks,
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Speakers work but no sound

Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.

This is your machine - http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-3.06-24-inch-al uminum-early-2008-penryn-specs.html
It is an iMac from 2008. You can download the .zip file directly to a new folder on the Windows side, unzip it and run setup.exe from this folder.
This is what you need - Boot Camp Support Software 4.0.4033. (From System Requirements).
Post Date: Mar 14, 2013
File Size: 601.76System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit

My little sister brought my ipod into the shower with her but it still works but it's weird, HELP!

My little sister who happens to be 10 years old brought my ipod with her into the shower. When she finished she handed it back but it was wet. I quickly shooed her away not wanting to deal with her and when I turned it the lock screen had some parts faded and other even more faded but some still it's usually brightness. I sorta freaked out as I saw my home screen which had the volume sign if you will up but I hadn't touched the button i then quickly dried it. When I tried to see if I could lower the volume it took a while for it to actually work and it didn't disappear for a while. I tried to calm down and turn it again later but then it was still the same only the volume sign wasn't there. I repeated the process and sometimes the volume sign was there and sometimes it wasn't. I haven't told my parents yet or my older brother who had bought the ipod for me since he thought I would be responsible with it. If anyone knows how to fix it, PLEASE HELP!

The worst thing you can do is turn the I pod on after it has been soaked in water. There is a remedy which has a decent track record of recovering iPods that have been doused in water. Believe it or not, the best thing you can do is to put the
IPod into a bed of rice and leave it there for 4 or 5 days, the longer, the better. Make sure it is in the off mode. Of course, there is no guarantee this will work, but it's about the only thing you can do. With a little luck, it will come back to life.

Transitions work but no sound?!?

I have a Power Point with animated GIF's, custom animations
with sounds assigned, and transistions with sounds assigned. When I
play the slide-show in Power Point everything functions fine but
when I publish it using presenter the animations and transitions
work but there is no sound and the animated GIF's only show up as a
still graphic. Any suggestions?

Not only that Taz, but here's something else to consider:
If you're using Breeze 5.1, animated .gifs aren't supported.
Although I can't speak for Presenter 6.0 users yet (still waiting
on my upgrade), I've heard that animated .gifs do work in that
environment.
Last note...and this really should be something everyone
needs to consider when crafting decks/presentations with the
intention of publishing...Just because you can make certain things
happen while editing and displaying in PowerPoint (including slide
show mode or F5), that doesn't necessarily mean that things will
STILL work when you publish your content.
Various facets of what you could normally get away with in
Powerpoint simply don't convert well (if at all), especially with
things like custom animations and Action Buttons. And although most
of those "bugs" have been documented I still think we, as users,
need to keep putting the heat on Adobe to improve what they have,
because the reality is that there are a BUNCH of other products
that can do what Breeze/Presenter does, and in some cases, cheaper.
That said, however, I also realize that the list of things
that don't work really isn't that long at all...but better to test
as you build rather than forcing yourself into a bad situation when
it's too late.

New i pad 3 was working via setup then screen went black can hear it working but no pitchure please help

new i pad 3 was working via setup then screen went black can hear it working but no picture please help

If this is a brand new iPad - and I don't know where you can buy a brand new iPad 3, I would take it back to the store before going any further. It sound like the screen dies from what you are saying.

Logitech USB headphones - microphone works but not sound output

Seems like the sound output to my Logitech USB headphone has stopped. The microphone inputs but the sound output is blocked. Could be technical issue with the set but was wondering of anyone else has this problem after the last update to 10.14.0

ChickInVici,
Having similar issue with iPad 2. No volume on Apps or Music (except when using headphones). Just started happening after months of no issues. Have reset/ restored with no solution. Can you provide more detail with your solution? I went to >settings>accessibility>voiceover.....but could not find headphones etc... what am I missing. Could you be more specific on what you changed to resolve your issue.
thanks

My sub works but no sound plz help audigy

Similar Messages

Maybe you are looking for