My submit button does not work using Outlook

I get the selection dialogue box - I make sure Desktop Email Application is checked and click OK.  Nothing happens.  A populated emaild does not appear.

Sounds like a problem with the allocation of the MailTo protocol with Outlook.
You should check its settings in the Windows control panel.

Similar Messages

  • ADOBE LiveCycle Designer 8 - EMAIL SUBMIT BUTTON DOES NOT WORK

    I created a new form in Adobe LiveCycle Designer 8, but the email submit button, nor a regular button assigned with a 'submit' function will do anything. It should initiate a new Outlook email but it does not. My default programs are set correctly (default email program and the default "mailto" program are set to Outlook). This document was created not only with ALC8, but on a Windows Vista PC with MS Office 2007. I ran a test to see if it would work on a WinXP SP2 machine with Office 2003 and it still did not work.
    Can anyone help?

    Alan
    Though not an expert, I've created a few forms with the Submit by Email button. If you've already done this then sorry for asking, but did you go through the Acrobat Distribution (Forms>Distribute Forms)process after creating the form in LC8? As far as I can tell the email submit button doesn't work without this stage.
    This confirms the email submission address, then sets up a dataset to be saved in a location of your choice.
    filename_dataset_0001.pdf
    then a file type that can be edited, saved and submitted by Reader users:
    filename_pub_0001.pdf
    You can save this to your intranet server or email direct to the recipient.
    When the submit button is then used you receive a copy of the whole form which on opening will prompt you to add it to the dataset. Receiving and adding multiple forms to the data set is straightforward. You will see them all listed in the viewer above the form itself. From here you can also then select and export the data to Excel via xml or as a csv file.
    Note that any changes you make to the form should be to the original document and the distribution process repeated, otherwise the functionality of the form will be affected.
    That's about the limit of my knowledge I'm afraid, therefore if you have already tried this and are still having problems then hopefully someone else can help out.
    Regards

  • Submit button does not work

    Hi,
    We have forms that have been working but now the submit button doesnt 'submit' and no notification email sent.
    Any ideas
    Thanks

    I am having the same problem. I just made a new form (online not PDF) using Safari and the form works. My test responses are showing up under the view responses tab, BUT EMAIL NOTICATION IS NOT WORKING. It's not sending the "submitter" a copy of their responses or the "owner" of the form submitted responses. I use these forms daily so i know this is a new issue and i'm 100% confindate that i made my form the proper way. HELP!!!!!

  • Submit Button Does Not Work...Purple one and Gray One

    Hello,
    Please Help me.
    I am creating a form and i wanted to test it first.
    *             Created In Adobe Pro Extended.
    *             Imported Into Adobe LifeCyle.
    I wanted to test the form before I submitted it for the group.
    note: somewhere....somehow... I made the "Submit Button", the Grey Button between the "Reset Form" and the "Print Form" use... "SEND FROM" TO: [email protected]
    Also After I Import A New "Same Form Into ALC, I click on submit button and goto ""Object Field" and enter [email protected] for the email address and change the email Subject.
    However every time when I'm using ALC, I click File>>>.Distribute Form..... Distribute Form Pop-up Window Opens Up.
    I Click "Manually Collect Responses In My Email In Box.>>>Click Next>>>Tick "Save a Local Copy And Manually Send Later.
    I Save To "C:\Users\Nimda\Desktop\Long-Term Care Ombudsman Volunteer Application\Long-Term Care Ombudsman Volunteer Application_distributed.pdf"
    Click Next>>>Click Finish.
    I Then goto my desktop and open "Long-Term Care Ombudsman Volunteer Application_distributed.pdf" and try to test it and i still receive the same SEND FROM" TO: [email protected]
    PLEASE HELP
    How Can I Change That, as I want to test form using my email address and information, before changing it with the proper email address  and submitting it to the group.
    Respectfully submitted,
    Attachments.Respectfully Submitted,
    [email protected]

    Hi Gabriel,
    did you find the solution?
    If yes, please share it with us because we're facing the same issue.
    Thanks in advance.

  • I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

    ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

    If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
    Music can only be downloaded once.

  • I have just updated my iPhone to version 5.1, and the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. Can someone help??

    I have just updated my iPhone to version 5.1. After the update, the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. It happens to my friends as well. What should I do? Can someone help?? Thanks!!!!

    Slide the camera button up

  • My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

    Hi, braidenwhitesidemate. 
    Thank you for visiting Apple Support Communities. 
    I would recommend going through the steps in the article below.  If the issue persists, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H. 

  • I bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????   HELP!!!!!!

    i bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????
    HELP!!!!!!

    Place the iOS device in recovery mode usning this program and then then restore via iTunes. The iPod will be erased.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Windows 8.1 - Upgrade from 8, Start Button Does Not Work

    I cannot find a fix for my 8.1 start button.
    It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
    I've also tried: 
    Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
    dism /online /cleanup-image /restorehealth
    Any ideas? I would prefer not to do a clean install. Thanks in advance. 
    HP Touchsmart 23 series
    i5-3475S 2.90GHz
    16GB RAM
    1TB HDD

    Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
    Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
    And what is the kind of the account, Domain? Local? Or both?
    This is local machine.
    It still doesn’t work in a new account?
    Same issue happens with a new account.
    What happens if you use win + "X"?
    Win + "X" works fine; displays options.
    Regarding to the “doesn’t work, both for screen touch and mouse?
    Left-click via the mouse does not work. Touch works fine.
    Can you try to copy the WinX folder from a working PC to your PC for a test?
    I do not have another Windows 8.1 machine available to me.

  • HT1212 what if your home button does not work to try to fix the connect to itunes problem?

    How do you diable your locked i pod touch using itunes if your home button does not work?

    Use one of these programs to place the iPod in recovery node:
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    The Firmware Umbrella - TinyUmbrella

  • The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

    The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
    == This happened ==
    Not sure how often
    == I installed firefox

    Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

  • My button does not work is that to turn my ipod works and my ipod is block is an apple with a loading baarre how do I restore it?

    my button does not work is that to turn my ipod works and my ipod is block is an apple with a loading baarre how do i restore it ? please help me

    Try:
    - iOS: Not responding or does not turn on
    Where it says place the iPod in recovery mode use this program vice the iPod's buttons
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My mouse can not click to anything left, right or the middle mouse button does not work

    I am using a 24 inch imac and the problem is suddenly my mouse can not click to anything left, right or the middle mouse button does not work i can see cursor moving and i can use the features of the keyboard but my mouse dies. I tried to plug in another mouse magic trackpad and my tablet but each has the same problem. I can not click to anything but cursor is moving and computer is not frozen. I have to shut it off from the power button when this happens. Do you have any idea what can cause this and how can i fix this?

    Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

  • How can i reset my ipod when home button does not work

    my daughter has changed her passcode on her iPod and now connot remember what it was. How can I do a reset when the home button does not work?
    John

    If a PC, use ths program to place the iPod in recovery mode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If a Mac then
    The Firmware Umbrella - TinyUmbrella

Maybe you are looking for

  • ISE 1.1.2 : Missing field to name an endpoint

    Environment : AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2 For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobi

  • Using IDVD can I make a playable video DVD then add a folder of jpeg photos on the same Disc?

    I'm able to make DVDs from iPhoto or IMovie & I've mastered IDVD's Menus pretty well. The DVDs play ok in DVD players to that's a plus. Now, what I want to do is somehow put folders of photos .... mainly those I've used in the slideshows...... if pos

  • Query regarding SUBMIT keyword

    Hi Guru's, I am working with module program. R_auart is declared as ranges in global declarations. I have screen 500 & 550. before calling the screen 550 my range variable is upadated with 2 values...(order type) ie.,r_auart so some coding is done in

  • Line and Iphone 3 (and IOS 4.2.1)

    hi, I have an Iphone3, with IOS 4.2.1. I had Line, and Line worked well. (last week!) Now, for Line, I need IOS 4.3. And IOS 4.3 doesn't work for Iphone 3. How could I use Line in my Iphone? Thanks for your help. arnaud

  • Part timer accrual formula - consider date track change

    Needed some help with part timers accrual formula. The accrual formula need to prorate the entitlement based on the work hours and accrual bands(years of service). The accrual formula should account for date track changes to both the years of service