My subscription is due to be renewed next month and has active form that we will be using until May 2015.

Will my subscription be renewed?

No I don't work for Verizon. Why is it every time I give factual information and the poster does not like the answer I and others get asked that question. Any notary can witness the signature it does not need an attorney. The jail should have a notary on staff who may assist you.
Under the Fair Debt Collections Practice Act once you notify the creditor in writing you are disputing the charges they have to stop collections and must investigate your claim. I would think once you show a copy of a police report verizon would see your point of view. http://www.ftc.gov/enforcement/rules/rulemaking-regulatory-reform-proceedings/fair-debt-collection-practices-act-text
Good Luck

Similar Messages

I can't be the only person who has this problem - when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that

I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.

Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.

My daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!

my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

That has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
From:
http://support.apple.com/kb/TS3694#error1
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hello I am coming to the united stats next month and i have a broken iphone 4 What are my options ? And could i replace it with the new iphone 5 or other apple products ? And how much will it cost me . Thank you for you're time.

Hello
I am coming to the united stats next month and i have a broken iphone 4
What are my options ?
And could i replace it with the new iphone 5 or other apple products ?
And how much will it cost me .
Thank you for you're time.
<Edited by Host>

If that iPhone was orignally sold in the US, Out of Warranty replacement cost
will be
Phone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
Replacement will be an iPhone of the same color and GB. There is no option to upgrade
using Out of Warranty replacement.

MDX to fetch record from 1st of current month to 5th of next month and same for previous year

In my date dimension I have a attribute CalendarDate. I do have a hierarchy [Date].[Year].[Quarter].[Month].[CalendarDate] as well. I need to fetch data starting from 1st working day of current month to 5th working day of next month by MDX. I do have a attribute
to filter working day as IsWorkingDay. How can we get a dynamic MDX that will find the current month first and than it will filter the record from 1st working day of current month to 5th working day of next month. And same for the previous year same month
to compare.
Thanks in advance!
Palash

Hi P,
You can use a calculated member to dynamically add all the days in the current month and the first 5 in the following month. You will need to change measure, cube and hierarchy names.
with member measures.ThisMonthAnd5 as
sum([Date].[Year].parent.children,Measures.[Sales])
+sum(Head([Date].[Year].parent.nextmember.children,5),Measures.[Sales])
select
{Measures.[Sales]
,Measures.ThisMonthAnd5
} on 0,
non empty [Date].[Year].[CalendarDate]
on 1
from MyCube
Richard

In making a monthly budget how do you repeat for next month and update the dates to the next month?

i want to make my budget speadsheet update the month and date as it goes to the next month automatically, from sheet to sheet. is there any way to make this happen?

You could have a cell where you enter the month and year...
Or you could pull the month and year from the first entry in the date column. Like Barry I would want more information regarding your set up before proposing any other, more specific, ideas.

Im due for an upgrade next month.....

In your guys and gals opinions, should I get the 4S or should I tough it out and wait for 5 (when I have not clue when it is being released). My 3GS is really slowing down now, I have had it for 2.5 years....... I can't decide..... what does everyone think?
ps. Hope mentioning the 5 does not get me into trouble.....

3GS to 4S is an excellent upgrade. If your 3GS is slowing down and you don't feel like waiting, I wouldn't feel bad about upgrading to 4S now. I think you'll be happy. Remember, no one has any idea when the next iPhone will be released. You could set yourself to wait another 8 months.

HT3702 I cannot proceed any transaction due to I renew my cards and previous transaction didnot clear. Please assist and advise. Best regards

Should have email for solving the issue

Hi Manny1/mreider,
First, I’m sorry to hear that you two may be having issues utilizing a recently purchased Gamers Club Unlocked (GCU) Gifting Card.
In all reality, our stores don’t even need to exchange the Gifting Card for the standard GCU card, although that option should be available to you if absolutely needed. The GCU Gifting Card can be applied to your My Best Buy membership by simply following the directions on the back of the card.
Thanks for sharing your feedback and I hope for a much better experience when you return to your local Best Buy to get this taken care of! If needed, please don't hesitate to ask for a manager or supervisor.
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Is it possible to use FaceTime With my two IPad With the same email address? I Will Google to china next month And i would like to communicate With my kids.

IS it possible to use FaceTime With my two IPad That has the same address? I Will Go to China soon And i would like to discuss With my kids from there i.e. One IPad in China And one in Montréal.

No, this is not possible. It would be like dialing your own phone number. You must verify an additional new email address for your second iPad. See the following link which will tell you how to do this. You will need to add this new address to Facetime app in one of your iPads.
http://support.apple.com/kb/HE68

If I expand a web page using Control +, how can I make sure the next page I go to on that site will also be in expanded mode, and the 1st page will still be in expanded mode when I come back to it? This is automatic in Chrome browser.

Right now the pages always revert to small size. It's a hassle having to expand them every time to make them readable for my vision-impaired eyes.

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

Renewed my monthly plan , downloaded creative cloud desktop app on new laptop, go to apps, but i dont have an option to install photoshop, I have it installed on two other laptops but both laptops were damaged and i cant access them to delete the installe

hello, i ordered photoshop on creative cloud in August 2014 on a monthly plan, had no problems installing and using etc, until both mine and my girlfriends laptops were damaged. I then stopped paying my monthly plan. and PS was deactivated. I recently got a new laptop which im using currently, it is an aspire one with windows 7. I paid my debt to adobe to reactivate, Creative Cloud Photography plan (one-year) . I then downloaded creative cloud and logged in as usual, i go to the apps page to install PS but it only has an option that says TRY. i looked into the problem and found that with my account i can only have PS installed on two devices, and the only two solutions i saw was to uninstall on the other devices and then re install. This is my problem, my girlfriend chucked her laptop straight in the bin whilst I have mine in the cupboard in pieces not working. or the other option was to open a new account with adobe. I dont really want to follow that option as I have just paid my debt and subscription for the next month and i dont want to change my email address associated with the adobe account. Any advice or solutions will be appreciated, thank you.

The purchase is active now, we have recieved the payment. You have one activation left.
Current Plan:
Creative Cloud Photography plan (one-year)
Account Activated:
20-Aug-2014
Since there is no billing issue, please try to install & activate the CC, in case of any issue contact Adobe Support via Contact Customer Care
Regards
Rajshree

I am from India and is planning to purchase iPhone 4 from US during my visit there next month. My querry is whether or not i can use this phone in India since the carriers are not AT

I am planning to buy an iPhone 4 from US during my visit there next month and want to use this iphone in India with a different carrier other than AT&T and Verizon. Is it possible to do so? Is there a way out i can use in India the iphone purchased in US without compromising on any of its features and applications?

Thanks.
1. Where can i purchase a sim free iPhone4 from Apple which would work with a carrier (guess whether you have heard about Airtel, Reliance, Vodafone etc) available in India.
2. Do these sim free iPhones have similar features and applications as in the locked ones ?
3. Is there a price difference between these sim free & locked IPhones ?

How to control the depreciation for revaluation from next month ?

Dear all,
I post current year ord. depreciation revaluation via trx. ABAW (Bal. Sheet Revaluation), and the general ledger will be updated after depreciation run.
In our client, the scenario is AFAB (dep run) --> ABAW (revaluation) --> AFAB (dep repeat run).
Now my problem is I want the revaluation value be depreciated next month and the second AFAB just for general ledger posting. I have set the period control '11'(next month) for revaluation but it doesn't work, the second AFAB still generates both G/L and depreciation posting.
How can I control the revaluation depreciation from next month?
Thanks for your help.

Hi,
we have used a different approach. We run two separate depreciation areas:
01 - ordinary depreciation
03 - revaluation
We maintain two complete streams of data. 01 is linked to the original acquisition value of the asset and depreciates normally.
03 is linked to the revaluation. Each month we recalculate the replacement value, revalue the accumulated depreciation and then run depreciation using transaction AFAB.
I don't think it will work in the way you described.
Kind regards,
Rudolf

Calculating next month for December month

Hi,
I am able to get the value for a measures in which one measure calculates value for month selected through prompt and another measure calculates values based on next month.
So I have restriced measure 1 like this in where condition
MONTH_V.MONTH_IN_YEAR_NUM=@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained)
Second measure I have restricted like this
MONTH_V.MONTH_IN_YEAR_NUM=(to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))+1)
This works perfectly alright.
I have prompt for year also. So when I select December - 08 then the calculation goes wrong, since MONTH_IN_YEAR_NUM=13 and there is no corresponding record for 13.
So my question here is can I use CASE statement for this.
MONTH_V.MONTH_IN_YEAR_NUM=
(CASE WHEN (to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))<>12 THEN
(to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))+1)
ELSE 1
AND
MONTH_V.MONTH_YEAR=
CASE WHEN (to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))<>12 THEN
(@Prompt('3. Year :','N','Prompt\Year', mono ,constrained)
ELSE
(to_number(@Prompt('3. Year :','N','Prompt\Year', mono ,constrained)+1)

Hi,
Create 2 condition objects with prompt in universe. one for current month and another for next month from current month.
In report take data from 2 data providers. One for current month and one for next month and apply the corresponding conditions and also take the corresponding measures.
Hope this will help you.
Regards,
Rakesh K

My subscription is due to be renewed next month and has active form that we will be using until May 2015.

Similar Messages

Maybe you are looking for