My superdrive will only burn audio cd's up to 8x for some reason...
I'm a college student, and I burn a lot of audio CDs to listen to in my car, and from what I recall, usually my burn speeds are around 24x. I tried burning a CD today and Toast only gave me options up to 8x burning speed. It actually burned the disc fine and everything, it's just that I can't figure out why all of the sudden my speed options have been reduced so low.
Are you using the same blank CDs that you recorded at 24x on? CD/DVD media are rated at certain speeds. If the CD/DVD media is only rated at 8X, it will not burn faster than that. Also, DVD and CD speeds are not the same thing. Was it a DVD that you were burning in Toast or a CD?
Similar Messages
-
IDVD will only burn to 16X discs and not 8X
I replaced my original superdrive with a pioneer DVR-100 because it can burn at 16X speed and dual layer. Now, iDVD will only burn to 16X discs. When I try to use 8X discs I get an error message. iDVD will begin to write, the disc will spin up twice, then the disc is ejected. The really annoying thing is that it makes those discs unusable.
Any ideas how to fix this.What brand DVD-R?
I burn Verbatim DVD-R 16X at 4X all the time using a disk image and Toast (or Disk Utility). Try Verbatim. I use other brands too. In both of my "SuperDrives."
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006 -
Superdrive will not burn on mountain lion
After installing mountain lion on iMac, superdrive will not burn or recognize cd/dvd. Have tried several different brands and burning software with same results.
If you have a CD or DVD, insert the disk and see what happens. If the drive kicks back the disk or gives you some kind of error message, then it's most likely a hardware issue, and might require a repair. However, if the drive seems to work fine mechanically, then it's a software issue.
http://support.apple.com/kb/HT2801?viewlocale=en_US&locale=en_US
http://www.macworld.com/article/1166312/cures_for_an_uncooperative_cd_dvd_drive. html
Follow these links, and post with your results; others will gain from the info! -
USB Superdrive will not burn my cd
I have a macbook pro Retina display and the USB Superdrive. For some reason the superdrive will not burn cd's. Help please...US
Hi larsonteam,
Thanks for using Apple Support Communities.
In addition to the following tips, check out these articles:
Solving problems with burning discs
If the disc burning options are dimmed or unavailable
Disc Burning Quick Assist
http://support.apple.com/kb/ht1152#trouble
Best of luck,
Mario -
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
-
AppleTV will only play audio, not video
My AppleTV will only play audio, not video via Airplay. I've verified correct settings, reset iPad, AppleTV and router with no success. Please help!
Welcome to the Apple Community.
What is it that you were playing, some providers block their content from AirPlay. -
Used to burn/read DVD-R and +R disks, lately will only burn +R.
My MBP used to burn/read DVD-R and +R disks. Lately will only burn +R.
The drive info:
HL-DT-ST DVDRW GS23N:
Firmware Revision: SB03
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 0 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh
Others show the drive with -/+R -/+RW and DL (and more) and 2 MB buffer...
It makes no sense to me, need help. Thanks.
Leslie.Hi Leslie,
Try an SMC Reset: http://support.apple.com/kb/HT3964 -
Usb superdrive will only eject discs, connected to macbook pro
new usb superdrive connected to new macbook pro, superdrive will not read discs, just ejects discs.
Hello wwboa
For issues with your SuperDrive not reading the disks and spitting them back out, check out the troubleshooting below to get it working for you.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Regards,
-Norm G. -
My Time Machine will no longer back up to my external drive for unknown reasons. It began after a series of power outages (my equipment is protected by a surge protector with battery backup), and was shut down correctly. Then it began by not recognizing my disk and my Time Machine password, although I am positive it was correct. I tried NUMEROUS times to get into it. It says the disk is damaged and needs to be erased and started over. How can I back up my files on my Mac so I can do that? I have no other disk to back up to. I found the files in a folder called "Backups.backupdb", and tried to copy them into a folder, but get the message "The volume has the wrong case sensitivity for a backup." The "lost+found" folder did copy for me. Will I just have to lose 4 years of backups?
Hi there,
I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
I tried all of these without success:
- deleted backups via iTunes / Preferences
- deleted backups from sync folder
- created a new admin user and tried to sync
- reinstalled iTunes
- ran all Windows updates, restarted, reinstalled iTunes
- ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
Any hints welcome,
Cheers,
Miguel-KA -
iPad2 won't sync with iMac and only my iphone4 shows in the devices window on my iMac. For some reason it will not detect my iPad via my wireless network! The iPad will sync when plugged into the Mac however looses connection and disappears from the device window when unplugged.
Jayplus wrote:
I have a D-Link WBR-2310 and already bought an external antenna which cost me additional. Besides moving my iMac, what options do I have?
You already have a wireless router or have just bought one, or do you have an ad hoc connection from iMac to AppleTV?
If things worked in the other location this all point to poor network performance/connectivity. It may be the connection is intermittently lost - small files transfer ok, but interruptions during longer transfers scupper the process.
Interference from cordless phone bases or microwaves (and neighbours devices) might also cause connectivity issues.
Signal strength bars are often not that useful, but will indicate connection to the main wireless device they connect to - so AppleTv may have a good connection to the router but a poor iMac connection to router is not displayed by AppleTV which only shows the connection to the first device in the chain.
You could consider some home mains newtorking plugs such as those made by Devolo but they usually have to be on the same mains ring. -
Hi there
So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
Can anyone help please?
Thank youThank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
All that happens is it just flicks through it all and won't play any of it???
As in I select the song and it just flicks back one screen (if I am making sense).....
I am really stuck and cannot work out what's gone wrong that's all.
Considering a reset of my new iphone and trying again but done that once and it's still the same. -
My wife is working in London for 5 weeks & staying in digs, so we thought it would be a good idea to buy an ipad2 so we could skype each other, she could watch movies from the icloud, access skygo etc,and it wouldn't be as bulky as a laptop. All fine if you can get wifi, but for some reason her ipad cannot locate any btfon or btopenzone hotspots (or provider), IN LONDON??!! We can access them at home in a little village in Northern Ireland. Her digs have an ethernet socket, is it possible to connect her ipad to this socket via an adapter?
No. She will need to come up with an alternative way to connect. A mobile hotspot perhaps.
Finding some way to connect to these hotspots would be the ideal situation. I know that you realize that. We know nothing about what is happening, but if you can explain in some detail, maybe somebody here can help. -
I pad mini 16 mb WiFi only...
For some reason the Ipad quit recieving txt msges...I have changed nothing...My I phone is recieving the txt...I have a connection between my home network and the ipad...All settings in the MESSAGES>SETTINGS are correct....Any Help?Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I have a white iPhone 4S. For some reason I cannot send media (picture,video,etc.) with one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text message. Why is this happening!? It happens connected to wifi and not connected to wifi.
I appreciate the help, thank you!If it says "Delivered" under it to begin with, then you're not sending it as an MMS, you're sending it as an iMessage. It's entirely possible the problem is on the receiving end.
-
I have a lot of songs in my Itunes library. However, for some reason, they have disappeared and I only have one song left. When I check under My Music, I can see all the songs but can't access them through Itunes. Any idea why this happended and how I can fix it?
I think I fixed this problem a few years ago by literally copying and pasting all my audio content into the iTunes library folder. I can't remember what is called of the top of my head and I don't know if this will still work.
Maybe you are looking for
-
System Lock Error while reset & reversing the cleared document - FBRA
Hi Experts, Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in produc
-
Ipod freezing during connection to mac
I have a 3rd gen ipod and powerbook G4 with an external harddrive Lacie 80gb which now contains my itunes library. The problem I am having is in updating my ipod library. Each time I connect to the lacie drive (with firewire connection, it recognizes
-
i have ton of clip art from cd's. when i place them into ID i'm unable change the color and use the bezier curves to change the ill??? what can i do?? many thanks in advance!
-
Scan to Acrobat 8 Pro from Samung CLX-3160FN - crash
I have been trying to use Adobe Acrobat Pro 8 to scan on my Samsung CLX 3160FN multi-function printer. After going through the process of scanning it gives me this message: Adobe Acrobat 8.0 has stopped working. Here are the problem details: Problem
-
USB Drive Accidentally Unmounted & Now Won't Mount
Hi, My Seagate 400 GB USB external drive was accidentally unmounted improperly and now it won't mount. I restarted my laptop, restarted the drive itself, changed cords and USB inputs on the laptop and nothing has changed. The drive doesn't show up in