My SWF is not the same size as my Flash document size
My SWF is not the same size as my Flash document size. How can I get it to be the same.
Thanks
I spent a little time trying to figure out if there's some setting anywhere that might explain this, but couldn't find anything. That doesn't mean there isn't any--I just don't know of any.
I'm wondering if you could take a screen shot that shows the stage size versus the swf size when it plays? It will help to make sure the problem is what I think you have it explained it to be.
Does this happen in all files you create or is it occuring just in one particular file? What version of Flash are you using? If you can make your file available maybe someone can see if the problem remains when they open it--possibly even track down some cause. I am unable to open CS4 files (don't have it), but if it's an earlier version I can take a look.
If you are using CS4, have you updated it to the latest release (10.0.2, I believe)? There were numerous bugs when CS4 was released, though I don't know if this would be one of them.
Similar Messages
-
My exported edited image in TIFF-16bit is not the same as my edited RAWfile
Hi! First and foremost my problem is not speed. I have learn to deal with Aperture's slowness while editing or exporting images and not real time brush strokes and occassional crashes. It thought me PATIENCE!
My problem are my exported image from Aperture, The images are not rendered the same exact way as the RAW image I edited (quality-sharpness-saturation-definition-etc.) in Aperture. The rendering is WAY OFF. I even exaggerate in Sharpness and contrast in rendering my RAW images yet my exported (both TIFF -16 bit or JPEG orig. size) are way softer than the one I originally rendered in RAW at Aperture 3.0.2. Even the COLORS are OFF-saturation, luminance, etc. It's not my Monitor or my Eyes, I asked 3 friends to help me validate my concern. After viewing my exported (TIFF or Jpeg) images on an external preview browser, I re-import them to Aperture and put them- (the exported images) in the same Projects where the Original RAW file is located, then I carefully compare them in Full Screen view, I can totally say that they're not the same quality, sharpness, saturation, tonal value!
It's very frustrating to experience this. I work really hard on every single image, I tolerate the sluggishness, the crashes, All I want are my image output render the way I rendered them in RAW file in regards to sharpness, color value and just the overall look that I wanted in my images. BTW I just downloaded the recent March 22, 2011 update. But still it's still having this problem.
Please help me all you good knowledgable, compassionate Aperture experts help an Aperture user in distress.
Thanks for your time. I appreciate any positive feedback and help.
JCRichard,
You are not going crazy, this is a well documented throughout the web
Sorry, but the web is not documentation for Aperture.
I cannot understand why Apple have not resolved this
For one, it takes time to fix a bug, and the have to know about it. Have you told Apple that this is a problem through Aperture feedback? Second, someone at Aperture has to prioritize what their engineers work on. Since this does not seem to be a problem for very many people (including the well-regarded contributors whom you were trying to offend in your other post on this topic), it may turn out that it has a low priority for Apple.
Please Apple sort this out!
Apple does not contribute to this forum and there's no reason to believe they will read this particular message and make a bug report.
nathan -
Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero -
Log-on client 200 is not the same as BI clients "600"
Hi Experts,
My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"".
Diagnosis
You are using client-dependent BI functions in client 200. However, the standard BI client is 600.
System Response
The function is terminated.
Procedure
Maintain a destination in the BI standard client. For information, see SAP Note 522569.
I went through the sap note and checked the maintenance of rfc desination. But not able to uderstand this issue. Do anyone have good idea about this issue.
Thanks in advance.
AnandHi,
In BW, you must work on only client. As the error said, you log on to client 200, but using 600 client as the connected one. Please check the source system conncection whether it is given for the default client in RSADMINA table BWMANDT field or not. if not change that. -
Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC
We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
RommelHi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
IMG->CRM->Transactions->Basic Settings->Copying Control for
Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
- Source COM_PARTNER_A (PrecedingPartner)
- Check Mapping for Partner Being search
- Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
Type.
Tell me if this is what you looking for
Gun. -
In my iTunes on computer, I have several smart play lists. Within each playlist, songs are set to a certain order. Some playlist songs order are organized by name, some playlists are organized by Album, some playlists are organized by artist etc.
When I was syncing my iPhone and iPad directly with my computer, the playlists on my mobile device had same order of songs as on my itunes in computer.
Now, I signed up for iTunes match. With iCloud sync, order of the songs in my playlist of mobile devices is not the same as on my computer. In fact, order of songs within a playlist appears to be completely random. Moreover, order of songs are different in my iPhone 4s and iPad 2
How can I change the order of songs on my mobile devices or how do I make iTunes match to sync my songs such that within a playlist, my songs are in the same order as that of iTunes on my computer.Thanks mracole. I assume this means order of songs will work with regular play lists I iTunes match. Will try it this afternoon and report.
Please let me know if my understanding is not correct.
Best regards and thanks once again. -
I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support. -
all ive been seeing is that i can reset my password with my apple iD, but its not the same. and it doesnt do the command R thing or the terminal/utilities thing. so what do i do??
Phil,
First of all, to log in as the HTML DB administrator, you want to use a different page, one that ends in /pls/htmldb/htmldb_admin Try logging in there. If that doesn't work, see this thread about creating a new admin account:
stupid password tricks
Sergio -
My iPhone serial number and IMEI is not the same as Apple server
Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco MarzabalHere we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies -
My Icloud ID is not the same as my Apple ID how can I chamge my Icloud ID to match. Non of my photos are streaming over to my Icloud and I have been paying extra for additional storage space.
Start here, change your country if necessary and go to manage your account and request another email.
-
I was using FF 4 Beta and applied the update ... I noticed that my final version was not the same as shown on the website so I removed the beta setup file and took off all versions of FF cleaned adn restarted my laptop and then reinstalled a clean version of FF 4.. however my final* version is not the same as shown still. Is this right or do I need to do something else :(
Examples of what is different is the home icon remains on the left hand side of the screen next to the back button and I do not have the bookmarks icons which from the website should appear on the right hand side next to the new location of the home button.Look you can customize it very easily.
Press Alt+V to have the View Menu -> Select Toolbars -> Click on Customize -> Now drag the Home Button to anywhere on the toolbar and pick the Bookmarks Button from the available icons and put it in the toolbar. -
Apple ID is not the same as iCloud ID and I need to activate my phone.
So my phone pooed itself and I had to reset it. That did not help and so I had to erase all of my settings. Upon getting to the activation page, it says that my apple ID is not the same as my iCloud ID....although that is the only ID that I have ever used for my phone.
Is there any way that I can remove my phone off of the iCloud and then proceed through activation a different way?
Thank you very much for the help!No. In order to reactivate your device have to provide the ID and password that were used to activate it originally. If you are not the original owner, you will have to contact the original owner to either get the ID and password, or have him/her erase the device and remove it from their account as explained here: Find My iPhone Activation Lock: Removing a device from a previous owner’s account. If you cannot contact the original owner you will not be able to activate and use your device. No one else can help you with this and there is no way around it.
-
i just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...
Start here, change your country if necessary and go to manage your account and request another email.
-
Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT know it. Thanks! I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.
Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps.
Maybe you are looking for
-
How do I block an email address on iPad
How do I block an email on my iPad
-
I'm trying to create a smaller project (about 3 minutes) from a larger clip (45 minutes). I use the "split clip at playhead" command at the beginning and end to trim a smaller clip, but find that "get info" for the new, supposedly smaller clip is sti
-
What is standard requirement type SAP
What is standard requirement type and standard requirement class in sap ? Sagere
-
Photoshop CS3 to PhotoshopCS3 Extended
I'm going to buy the Extended version of Photoshop CS3 but wonder if I can install it over Photoshop CS3 or will I need to uninstall/deactivate CS3 then reinstall with the new CS3 Extended license#? TIA Don, Toronto
-
When I start or restart my MacBook Pro, the Mail app launches. I do not have "Open at Login" checked in the Dock, nor do I have Mail in the list of startup items in System Preferences. Why is this happening, and what can I do about this? Thanks, Nick