My swing application is too slow

Hello
my application is an add-in swing application. It is connect with a posptgres database to show and edit data in this database. The application has about 10 frames and dialog. It run very slow. It may take 20-30 seconds to close a dialog or frame.
Do you have any hint or suggestion so I can increase the speed of the application.
I already increase memory to 512m when run the application by using
-Xms512m
I really need help about this issue. Could you please help
regards
suhu

Stop doing all the DB accessing in the event thread?

Similar Messages

  • Application running too slow on sun T5440 but run normal on sun M3000

    Hi all,
    I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
    Here is my server T5440 info:
    Code:
    bash-3.00# uname -a
    SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
    Psrinfo -pv
    Code:
    bash-3.00# psrinfo -pv
    The physical processor has 64 virtual processors (0-63)
    UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
    The physical processor has 64 virtual processors (64-127)
    UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
    The physical processor has 64 virtual processors (128-191)
    UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
    The physical processor has 64 virtual processors (192-255)
    UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
    /etc/system
    Code:
    set semsys:seminfo_semopm=10000
    set semsys:seminfo_semmsl=10000
    set semsys:seminfo_semmni=1024
    set max_nprocs=50000
    set msgsys:msginfo_msgmnb=2097152
    set msgsys:msginfo_msgmni=2560
    set msgsys:msginfo_msgtql=2560
    set shmsys:shminfo_shmmax=1073741824
    set shmsys:shminfo_shmmni=1000
    set rlim_fd_cur=10000
    Ipcs
    Code:
    bash-3.00# ipcs -a
    IPC status from as of Wed Jun 13 12:31:01 ICT 2012
    T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
    Message Queues:
    q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
    q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
    q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
    q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
    q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
    q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
    q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
    q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
    q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
    T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
    Shared Memory:
    T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
    Semaphores:
    s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
    s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
    s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
    s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
    s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
    s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
    s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
    s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
    s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
    s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
    s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
    s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
    s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
    s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
    s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
    Prstat
    Code:
    PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
    9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
    12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
    9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
    9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
    9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
    9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
    9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
    9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
    9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
    9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
    9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
    9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
    NPROC USERNAME SWAP RSS MEMORY TIME CPU
    41 topx 334M 2237M 3.4% 0:30:17 0.3%
    43 root 186M 195M 0.3% 0:14:45 0.0%
    1 noaccess 152M 136M 0.2% 0:04:00 0.0%
    1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
    1 lp 1208K 3880K 0.0% 0:00:00 0.0%
    6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
    Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
    Prstat –mL
    Code:
    bash-3.00# prstat -mL
    PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
    9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
    9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
    9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
    17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
    9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
    9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
    9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
    9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
    9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
    9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
    9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
    9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
    9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
    9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
    9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
    259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
    1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
    1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
    140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
    Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
    Vmstat
    Code:
    bash-3.00# vmstat 1 10
    kthr memory page disk faults cpu
    r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
    0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
    1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
    0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
    1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
    1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
    1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
    0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
    1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
    0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
    0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
    Mpstat
    Code:
    CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
    0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
    1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
    2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
    3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
    4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
    73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
    73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
    73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
    78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
    78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
    79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
    79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
    79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
    79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
    64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
    77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
    69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
    69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
    66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
    When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
    Netstat
    Code:
    bash-3.00# netstat -i
    Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
    lo0 8232 loopback localhost 244022 0 244022 0 0 0
    nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
    nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
    iostat
    Code:
    bash-3.00# iostat -xn
    extended device statistics
    r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
    0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
    0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
    0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
    0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
    0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
    0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
    0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
    0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
    0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
    0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
    0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
    0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
    0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
    0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
    0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
    0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
    Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.

    Moderator Comment and Action:
    @ O.P.,
    You cross-posted this to at least two other forum web sites:
    http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
    http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
    ... and didn't think that was important enough to simply mention the fact.
    Timestamps suggest that OTN was the last place you posted to.
    Poor forum etiquette.
    Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
    (Yes, you already received the suggestion to use Dtrace in one of those other sites.)
    This thread is locked as irrelevant.

  • Java web start application runs too slow...

    Hello,
    I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
    <information>
    <title>ERD</title>
    <vendor>Deepika Gohil</vendor>
    <homepage href="http://appframework.dev.java.net"/>
    <description>A simple java desktop application based on Swing Application Framework</description>
    <description kind="short">ER Deign Tools</description>
    </information>
    <update check="always"/>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.5+"/>
    <jar href="ERD_1_2.jar" main="true"/>
    <jar href="lib/appframework-1.0.3.jar"/>
    <jar href="lib/swing-worker-1.1.jar"/>
    <jar href="lib/jaxb-impl.jar"/>
    <jar href="lib/jaxb-xjc.jar"/>
    <jar href="lib/jaxb1-impl.jar"/>
    <jar href="lib/activation.jar"/>
    <jar href="lib/jaxb-api.jar"/>
    <jar href="lib/jsr173_api.jar"/>
    <jar href="lib/ant-contrib-1.0b3.jar"/>
    <jar href="lib/jaxb-impl.jar"/>
    <jar href="lib/jaxb-xjc.jar"/>
    <jar href="lib/FastInfoset.jar"/>
    <jar href="lib/gmbal-api-only.jar"/>
    <jar href="lib/http.jar"/>
    <jar href="lib/jaxws-rt.jar"/>
    <jar href="lib/jaxws-tools.jar"/>
    <jar href="lib/management-api.jar"/>
    <jar href="lib/mimepull.jar"/>
    <jar href="lib/policy.jar"/>
    <jar href="lib/saaj-impl.jar"/>
    <jar href="lib/stax-ex.jar"/>
    <jar href="lib/streambuffer.jar"/>
    <jar href="lib/woodstox.jar"/>
    <jar href="lib/jaxws-api.jar"/>
    <jar href="lib/jsr181-api.jar"/>
    <jar href="lib/jsr250-api.jar"/>
    <jar href="lib/saaj-api.jar"/>
    <jar href="lib/activation.jar"/>
    <jar href="lib/jaxb-api.jar"/>
    <jar href="lib/jsr173_api.jar"/>
    </resources>
    <application-desc main-class="erd.screen1">
    </application-desc>
    </jnlp>
    I dont understand the reason. Could you please help me out.
    Thank you,
    Deepika Gohil.

    Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
    You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources.

  • Application response too slow- How to resolve (webLogic)

    Hi All, Can you please let me know what are all the main areas that i need to concentrate in the weblogic application server if i get the complaint from the clients saying "application performance is too slow".
    Edited by: user11361691 on Apr 21, 2010 12:18 AM

    you need to check the following:
    1: Check the server log files to find any errors at the time when the Client is complaining about the server performance.
    2: You can enable the GC logs in the server log and can check whether the there is any issues with the memory usage of the server. From the GC logs you can that whether the time has been taken to to the GC and hence you can try allocating higher memory or you can try changing the GC algorithm according to the analysis.
    For details refer the following link:
    http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/topten.html
    http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/JVMTuning.html
    3: Finally you can collect the thread dumps snap shots and can see whether there are any stuck threads or deadlock situation in the server at the time of slow performance.

  • Application running too slow on Sun SPARC T5440 but run normal on sun T5220

    Hi all,
    I have application running on sun server T5440 1.4 GHz, 95 GB RAM, 32 cores(s), 256 logical (virtual) processor(s), application is running slow on load. when I install my application on another server SPARC-Enterprise-T5220 (UltraSPARC-T2 (chipid 0, clock 1165 MH) , 8GB RAM, 1 core, 8 virtual processors ), application runs smoothly.
    Could anyone please help me out what could be the possible reason for this behavior as ideally it should give better performance on T5440 server.
    Please find below the additional information from both the servers:
    kansparc54143 (/) # uname -a
    SunOS kansparc54143 5.10 Generic_144488-17 sun4v sparc SUNW,T5440
    kansparc54143 (/) # psrinfo -pv
    The physical processor has 64 virtual processors (0-63)
      UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
    The physical processor has 64 virtual processors (64-127)
      UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
    The physical processor has 64 virtual processors (128-191)
      UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
    The physical processor has 64 virtual processors (192-255)
      UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
    [email protected] # uname -a
    SunOS kansparc6744 5.10 Generic_144488-17 sun4v sparc SUNW,SPARC-Enterprise-T5220
    [email protected] #  psrinfo -pv
    The physical processor has 8 virtual processors (0-7)
      UltraSPARC-T2 (chipid 0, clock 1165 MHz)

    1008410 wrote:
    I put in the another forum bcoz i didnt get answer on this forum from anyone on this.
    ... and just like your other post here at the OTN web forums:
    https://forums.oracle.com/thread/2554576
    this thread is also locked.
    You have an active thread at another forum web site that has given you many legitimate responses:
    http://www.unix.com/solaris/229269-test-program-running-taking-much-more-time-high-end-server-t5440-than-low-end-server-t5220.html
    and you are still responding to those responses.
    There is no need to duplicate what is happening there, particularly since you continue to refuse to mention your other web postings (very bad forum manners).   If no one knows what you have posted elsewhere they will probably waste their time duplicating what you have already been told.   No one here is paid to type a response.   This is a user-to-user community forum site. 

  • Application Designer too slow

    I have installed client workstation locally on my machine. The issue is it takes too long time in opening pages / components..around 15-20 mins.
    Could any suggest any solution?
    Peopletools version - 8.49.12

    over the VPN your computer may respond slowly. if you are on wireless it would even take longer.
    try to use windows terminal services for all client activities. it responds real fast.
    Tracing can also be an option.
    Thanks

  • Accelarate the Linux ATI Graphics card  for java Swing application

    Hi All,
    I am using a ATI Radeon 9550 Graphic card in LFS (Linux from the scratch) environment. I want to enable the OpenGL-based pipeline for Java Swing application. I tried the -Dsun.java2d.opengl=true . But the Java swing application getting very slow.
    How to overcome this problem?
    Any one give the procedure to Accelerate ATI graphics card for Java Swing Application
    How to verify Java swing use ATI graphics card ?
    Thanks in advance..
    Prabhu.S

    Hi All,
    I am using a ATI Radeon 9550 Graphic card in LFS (Linux from the scratch) environment. I want to enable the OpenGL-based pipeline for Java Swing application. I tried the -Dsun.java2d.opengl=true . But the Java swing application getting very slow.
    How to overcome this problem?
    Any one give the procedure to Accelerate ATI graphics card for Java Swing Application
    How to verify Java swing use ATI graphics card ?
    Thanks in advance..
    Prabhu.S

  • Built In application "YouTube" Is Way too slow!

    Hey guys, I'm new here btw, so hi to all.
    When i watch videos on youtube built in app IT TAKES FOREVER! to buffer the videos, I'm using WI-FI and my net connection is 20mb, I would love to use it but it just takes toooooo long to buffer it would take me 4-5 minute to watch a one minute clip, Any help you'll be my new idol!
    The strange this is though, on my computer they load in literally seconds if not instantly are are completely buffered in under 5 seconds for almost any video, yet i could hardly watch a 2 minute youtube video, it buffers then 20 seconds later it stops and it won't supering buffer, i press play nothing happens, it just like it either WAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY too slow or it stops buffering completely, all i know is with youtube being such a big feature, it is almost useless by the terrible coding, or what ever the problem is to make it soo slow, i hear so much people talking about youtube and there iphone but mine is just too painfully slow to watch(and no 100% not my connection)

    Is there any youtube settings??? Can any setting be changed which relate to youtube? And is it possible to watch youtube through safari and not through the standard application?
    NO, there are no settings. Flash will not play in Safari yet, but there is a workaround using VideoHamster.
    Here are a couple of Flash YouTube videos on my server that I converted to QT with CosmoPod. How do they load for you? I have a 1M up cable connection. They should start loading and playing after a few seconds. YouTube videos start playing after about 5 seconds on mine.
    http://bmer.servemp3.com/test/
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

    My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

    Hi ...
    Checked to see how much free space there is on the startup disk lately?
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
    If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
    A Safe Mode boot takes longer then a normal boot so be patient.
    Once you see the Desktop, click the Apple menu icon top left corner of the screen.
    From the drop down menu click Restart.
    See if that makes a difference ...

  • I just bought MacPro 15", i7, Quad-Core, upgraded to 8GB RAM. Its responding to slow to poen applications e.g. word, ppt, chrome etc. reboot is too slow. Dont think its working so fast. Dosenot seems to be worth to money paid. What to do?

    I just bought MacPro 15", i7, Quad-Core, upgraded to 8GB RAM. Its responding to slow to poen any applications e.g. word, ppt, chrome etc. reboot is too slow. Dont think its working so fast. Dosenot seems to be worth to money paid. What to do? Not happy with Mac.

    Sandeep Goyal
    Jul 8, 2012 2:26 AM 
    Is is possible to install Win 2007 in MacPro (retina display) with USB (2.0 or 3.0) as new Mac retina display lacks DVD.
    MacBook Pro with Retina display, Windows 7 
    They have been calling their notebook a MacPro for a year. Or is it this?
    https://discussions.apple.com/thread/4463661

  • Laptop running too slow how can i run a clean up application or system check.

    My Laptop is running too slow and is constantly buffeting, how can i run some clean up software or a system check.

    If your Mac runs slowly:
    http://support.apple.com/kb/PH19031?viewlocale=en_US&locale=en_US
      Start up in Safe Mode. http://support.apple.com/kb/PH18760
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Run EtreCheck for a system report.
    https://discussions.apple.com/docs/DOC-6173
    FileVault encryption may make the Mac run slowly  after installing new version of OS X.

  • Best setup for a swing application

    Hello,
    I have developed an Swing application for a EPOS machine.
    The machine has around 512 ram.
    What's the best setup for me in terms of performance, for example, which JVM to use etc.....
    Cheers
    Bobby

    bsbiran wrote:
    Hi,
    Well the app require alot of images and I parts of it do run 'slow'
    ...I'm currently going through a book about Swing and read that many times the "slowness" of a Swing-application can be credited to the programmer for not using the API efficiently/correctly (letting the app repaint too much, or repainting large parts that don't need repainting at all, to name just two things). So, I don't know how much of a Swing-guru you are, but it might be better to read a few decent Swing tutorials or pick up a good Swing book.

  • Please Help! All Sounds in Classic are too slow now!

    Something dreadful happened (wish I knew what) and now every sound that is played back by any Classic application is about 70% too slow.
    No matter if it is a Classic game like Unreal (I), Deus Ex, AvP for OS9 (the OSX version works fine), or Quicktime 6, or any other given Classic application. The only sounds that appear normal are the Platinum system sounds.
    I don't know which files affect Classic sound playback or where they are located. Can't imagine what could cause that particular problem.
    Hope someone could help...
    Many thanks in advance
    M:A:
    PowerMac G5 2x2 GHz Mac OS X (10.4.6) 1.5 GB RAM, standard sound card (TI-TAS3004)
    PowerMac G5 2x2

    Sorry, didnt get an email notification, so I just checked the thread.
    Starting and quitting Garage Band actually helped!
    (Imagine listening to the meaningful dialogues in "Deus Ex" spoken with Sesame Street's Cookie Monster voice. Aaaaannnd reeealllly sllloowwww. Doesn't quite capture the mood...)
    Do you have an explanation why Garage Band should affect Classic sound output?
    Thanks a lot,
    Martin

  • New iMac running 10.10.1 frequently pauses, way too slow

    I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
    Problem description:
    Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro.  Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
    EtreCheck version: 2.0.11 (98)
    Report generated November 24, 2014 at 5:06:30 PM EST
    Hardware Information: ℹ️
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.2 GHz Intel Core i5 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      NVIDIA GeForce GT 755M - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 2:7:57
    Disk Information: ℹ️
      APPLE HDD ST1000DM003 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (749.24 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Western Digital Ext HDD 1021 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
      Seagate Expansion Desk 2 TB
      S.M.A.R.T. Status: Verified
      NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
      Western Digital Ext HDD 1021 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
      Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
      [not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
      [loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
      [not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
      [not loaded] com.fklt.driver (1.8.0) Support
      [not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
      [not loaded] com.novatelwireless.driver.3G (2.2.8) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
      [not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
      /System/Library/Extensions/InstantOn.kext/Contents/PlugIns
      [not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
      /System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
      [not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
      /Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (1.7) Support
      /Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
      [not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
      /Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
      [not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
      /Volumes/Bootable Backup New/Applications/Cloak.app
      [not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
      /Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
      [not loaded] com.alsoft.Preview (4.2) Support
    Startup Items: ℹ️
      NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
      M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [loaded] com.avira.antivirus.general.agent.plist Support
      [loaded] com.avira.antivirus.ipm.ui.plist Support
      [failed] com.avira.antivirus.notifications.agent.plist Support
      [loaded] com.avira.antivirus.odscan.default.plist Support
      [loaded] com.avira.antivirus.scheduler.agent.plist Support
      [running] com.avira.antivirus.systray.plist Support
      [loaded] com.avira.antivirus.telemetry.agent.plist Support
      [loaded] com.avira.antivirus.update.default.plist Support
      [running] com.flipvideo.FlipShare.AutoRun.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [not loaded] com.atomicbird.macaroni.launchd.plist Support
      [failed] com.avira.antivirus.dbcleaner.plist Support
      [loaded] com.avira.antivirus.ipm.loader.plist Support
      [running] com.avira.helper.watchdox.plist Support
      [loaded] com.barebones.bbedit.plist Support
      [loaded] com.bombich.ccc.plist Support
      [invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
      [running] com.bombich.ccchelper.plist Support
      [running] com.flipvideo.FlipShareServer.launchd.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.m-audio.firewire.helper.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sibelius.sari.plist Support
      [invalid?] com.sierrawireless.SierraReset.plist Support
      [running] com.sierrawireless.SWoCMon.plist Support
      [running] com.smithmicro.schedulerdaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.bombich.ccc-user-agent.plist Support
      [running] com.c-command.SpamSieve.LaunchAgent.plist Support
      [running] com.smithmicro.cleaning.schedulermailer.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
      Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
    Internet Plug-ins: ℹ️
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Scorch: Version: (null) - SDK 10.2 Support
      SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
      Myriad Music Plugin: Version: 5.6.2 Support
      RealPlayer Plugin: Version: (null) Support
      DirectorShockwave: Version: 11.5.0r596 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      DivXBrowserPlugin: Version: 2.1 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
      OVSHelper: Version: 1.1 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
      Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      OfficeLiveBrowserPlugin: Version: 12.2.7 Support
    Safari Extensions: ℹ️
      Videobox
      DivX Plus Web Player HTML5 <video>
      PriceBlink-1
      Speed Download
      Add To Amazon Wish List
      Exposer
      Discount Search for Amazon
      StumbleUpon
      WOT-1
      1Password
      YouTube Downloader
      Rotten Tomatoes
      Compass
    3rd Party Preference Panes: ℹ️
      3ivx MPEG-4  Support
      A Better Finder Preferences  Support
      RCDefaultApp
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
      PreferencesPane  Support
      Macaroni  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
      Destinations:
      Time Machine New [Local]
      Total size: 2.00 TB
      Total number of backups: 33
      Oldest backup: 2014-11-13 07:38:50 +0000
      Last backup: 2014-11-24 21:19:47 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 250.11 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% avlogwriter
          1% loginwindow
          1% avguard-ondemand-mgmt
          0% fontd
    Top Processes by Memory: ℹ️
      601 MB savapi
      352 MB mds_stores
      309 MB avguard.bin
      301 MB loginwindow
      206 MB Mail
    Virtual Memory Information: ℹ️
      2.80 GB Free RAM
      3.83 GB Active RAM
      978 MB Inactive RAM
      974 MB Wired RAM
      5.87 GB Page-ins
      0 B Page-outs

    Start time: 10:22:44 01/10/15
    Model Identifier: iMac11,1
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 20:24
    SATA
       Hitachi HDS722020ALA330                
    USB
       Hub (NEC Corporation)
       Backup+ Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       My Book 1110 (Western Digital Technologies, Inc.)
       Backup+  Desk (Seagate LLC)
       Hub (NEC Corporation)
       Backup+ Desk (Seagate LLC)
       My Book 1110 (Western Digital Technologies, Inc.)
       Backup+  Desk (Seagate LLC)
       hp LaserJet 3380 (Hewlett Packard)
       Officejet Pro 8600 (Hewlett Packard)
    Diagnostic reports
       2014-12-19 DashlaneAgent crash
       2014-12-21 QuickLookSatellite crash
       2014-12-22 DashlaneAgent crash
       2014-12-27 DashlaneAgent crash
       2014-12-28 HelpViewer crash
       2014-12-30 DashlaneAgent crash
       2015-01-05 Microsoft Word hang
    Log
       Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
    Memory: kernel_task (UID 0) is using 1332 MB
    kexts
       com.seagate.driver.PowSecDriverCore (5.2.6)
       com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
       com.vmware.kext.vmci (90.5.7)
       com.vmware.kext.vsockets (90.5.7)
       com.vmware.kext.vmnet (0188.79.83)
       com.vmware.kext.vmx86 (0188.79.83)
       com.vmware.kext.vmioplug.12.1.17 (12.1.17)
    Daemons
       com.carbonite.daemon
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.oracle.java.Helper-Tool
       com.apple.aelwriter
       com.adobe.fpsaud
       com.bombich.ccchelper
       com.seagate.TBDecorator.plist
       com.bombich.ccc
    Agents
       com.sony.PMBPortable.AutoRun
       com.bombich.ccc-user-agent
       com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
       com.leadertech.PowerRegister.SEA1.UUID
       com.adobe.AdobeCreativeCloud
       com.carbonite.carbonitestatus
       com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
       com.apple.MassStorageCamera.315272.UUID
       com.adobe.ARM.UUID
       com.bombich.cccuseragent
       com.seagate.dashboard
       com.adobe.CS5ServiceManager
       com.oracle.java.Java-Updater
       com.citrixonline.GoToMeeting.G2MUpdate
       com.adobe.ARM.UUID
       com.google.keystone.user.agent
       com.apple.AirPortBaseStationAgent
       com.hp.scanModule3.64216.UUID
       com.carbonite.carbonitealerts
    Startup items
       /Library/StartupItems/HP IO/HP IO
       /Library/StartupItems/HP IO/StartupParameters.plist
       /Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
       /Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
       /Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
       /Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
       /Library/StartupItems/VirtualBox/StartupParameters.plist
       /Library/StartupItems/VirtualBox/VirtualBox
    Bundles
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/MicrosoftMouse.kext
       - com.microsoft.driver.MicrosoftMouse
       /System/Library/Extensions/Seagate Storage Driver.kext
       - com.seagate.driver.PowSecDriverCore
       /Library/Extensions/VBoxDrv.kext
       - org.virtualbox.kext.VBoxDrv
       /Library/Extensions/VBoxNetAdp.kext
       - org.virtualbox.kext.VBoxNetAdp
       /Library/Extensions/VBoxNetFlt.kext
       - org.virtualbox.kext.VBoxNetFlt
       /Library/Extensions/VBoxUSB.kext
       - org.virtualbox.kext.VBoxUSB
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/AdobeExManDetect.plugin
       - com.AdobeExManDetectLib.AdobeExManDetect
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
       - com.adobe.acrobat.pdfviewer
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
       - com.adobe.acrobat.pdfviewerNPAPI
       /Library/Internet Plug-Ins/EPPEX Plugin.plugin
       - N/A
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/PreferencePanes/Carbonite.prefPane
       - com.carbonite.prefpanel
       /Library/PreferencePanes/DashboardPreferences.prefPane
       - com.seagate.dashboard.preferences
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/Growl.prefPane
       - com.growl.prefpanel
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/Microsoft Mouse.prefPane
       - com.microsoft.microsoftmouse
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
       - com.dashlane.dashlanesafari
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Dashlane.plugin
       - com.DashlaneLib.Dashlane
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Widgets/HP Ink Widget.wdgt
       - com.hp.widget.inkwidget
    Apps
       /Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
       /Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
       /Applications/Google Drive.app
       /Applications/Google Drive 2.app
    Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <!--
          com.seagate.TBDecorator.plist
          SeagateDiagnostics
          Created by John Brisbin on 3/10/10.
          Copyright 2010 Seagate Technologies LLC.. All rights reserved.
       -->
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.seagate.TBDecorator.plist</string>
        <key>RunAtLoad</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.carbonite.carbonitealerts</string>
        <key>OnDemand</key>
        <true/>
        <key>RunAtLoad</key>
        <false/>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
        </array>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.carbonite.carbonitestatus</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>OnDemand</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>16</integer>
        <key>Minute</key>
        <integer>33</integer>
        <key>Weekday</key>
        <integer>4</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.sony.PMBPortable.AutoRun</string>
        <key>OnDemand</key>
        <true/>
        <key>Program</key>
        <string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.teamviewer</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
        <string>-RunAsAgent</string>
        <string>YES</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.desktop</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>LoginWindow</string>
        <string>Aqua</string>
        </array>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
        <string>-RunAsAgent</string>
        <string>YES</string>
        <string>-Module</string>
        <string>Full</string>
        </array>
       ...and 6 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.bombich.ccc</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
       ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 229 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 207 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 233 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be permanently deleted.
       • Files on the destination will be updated if the size or modification date differs.
       • Older versions of updated files will not be archived.
       </string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 209 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.bombich.ccchelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.bombich.ccchelper</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.carbonite.daemon</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>WorkingDirectory</key>
        <string>/Library/Application Support/Carbonite</string>
        <key>StandardOutPath</key>
        <string>/Library/Logs/Carbonite1.log</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/Carbonite2.log</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.service</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
        <string>-Module</string>
        <string>Full</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc-user-agent</string>
        <key>Program</key>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
        <key>StandardErrorPath</key>
        <string>/Users/USER/Library/Logs/CCC.log</string>
        <key>StandardOutPath</key>
        <string>/Users/USER/Library/Logs/CCC.log</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Program</key>
        <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
        <string>--type=service</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>ServiceProcessSocket</key>
       ...and 7 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.leadertech.PowerRegister.SEA1.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
        </array>
        <key>StartInterval</key>
        <integer>3600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.seagate.dashboard</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
        <string>-runMode</string>
        <string>autoLaunched</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
         <key>Disabled</key>
         <true/>
         <key>KeepAlive</key>
         <false/>
         <key>Label</key>
         <string>org.virtualbox.vboxwebsvc</string>
         <key>Program</key>
         <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
         <key>Sockets</key>
           <dict>
           <key>Listeners</key>
           <dict>
             <key>SockServiceName</key>
             <string>18083</string>
             <key>SockType</key>
             <string>stream</string>
             <key>SockFamily</key>
             <string>IPv4</string>
           </dict>
         </dict>
       </dict>
       ...and 1 more line(s)
    Global login items
       /Applications/HP LaserJet Software/HP Setup Assistant.app
       /Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
    Firewall: On
    DNS: 216.40.77.126
    Listeners
       cupsd: ipp
       kdc: kerberos
       launchd: afpovertcp
       launchd: microsoft-ds
    User login items
       iTunesHelper
       - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
       VMware Fusion Start Menu
       - /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
       Google Drive
       - /Applications/Google Drive.app
       Canon IJ Network Scanner Selector2
       - /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
       Android File Transfer Agent
       - /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
       AdobeResourceSynchronizer
       - /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
       Eye-Fi Helper
       - /Applications/Eye-Fi/Eye-Fi Helper.app
       Google Chrome
       - /Applications/Google Chrome.app
       Launch Nikon Message Center 2
       - /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
    Safari extensions
       Dashlane
    Restricted files: 513
    Lockfiles: 4
    High file counts
       Desktop: 125
    Elapsed time (s): 584

  • How to create the digital clock in java swing application ?

    I want to create the running digital clock in my java swing application. Can someone throw some light on this how to do this ? Or If someone has done it then can someone pl. paste the code ?
    Thanks.

    hi prah_Rich,
    I have created a digital clock you can use. You will most likely have to change some things to use it in another app although that shouldn't be too hard. A least it can give you some ideas on how to create one of your own. There are three classes.One that creates the numbers. a gui class and frame class.
    cheers:)
    Hex45
    import java.awt.*;
    import java.util.*;
    import javax.swing.*;
    import java.awt.geom.*;
    public class DigitalClock extends Panel{
              BasicStroke stroke = new BasicStroke(4,BasicStroke.CAP_ROUND,
                                               BasicStroke.JOIN_BEVEL);
              String hour1, hour2;
              String minute1, minute2;
              String second1, second2;
              String mill1, mill2, mill3;
              int hr1, hr2;
              int min1, min2;
              int sec1, sec2;
              int mll1, mll2,mll3;       
        public void update(Graphics g){
             paint(g);
         public void paint(Graphics g){
              Graphics2D g2D = (Graphics2D)g;
              DigitalNumber num = new DigitalNumber(10,10,20,Color.cyan,Color.black);     
              GregorianCalendar c = new GregorianCalendar();
              String hour = String.valueOf(c.get(Calendar.HOUR));
              String minute = String.valueOf(c.get(Calendar.MINUTE));
              String second = String.valueOf(c.get(Calendar.SECOND));
              String milliSecond = String.valueOf(c.get(Calendar.MILLISECOND));
              if(hour.length()==2){
                   hour1 = hour.substring(0,1);
                   hour2 = hour.substring(1,2);
              }else{
                   hour1 = "0";
                   hour2 = hour.substring(0,1);
              if(minute.length()==2){
                   minute1 = minute.substring(0,1);
                   minute2 = minute.substring(1,2);
              }else{
                   minute1 = "0";
                   minute2 = minute.substring(0,1);
              if(second.length()==2){
                   second1 = second.substring(0,1);
                   second2 = second.substring(1,2);
              }else{
                   second1 = "0";
                   second2 = second.substring(0,1);
              if(milliSecond.length()==3){
                   mill1 = milliSecond.substring(0,1);
                   mill2 = milliSecond.substring(1,2);
                   mill3 = milliSecond.substring(2,3);
              }else if(milliSecond.length()==2){
                   mill1 = "0";
                   mill2 = milliSecond.substring(0,1);
                   mill3 = milliSecond.substring(1,2);
              }else{
                   mill1 = "0";
                   mill2 = "0";
                   mill3 = milliSecond.substring(0,1);
              hr1  = Integer.parseInt(hour1);     
              hr2  = Integer.parseInt(hour2);
              min1 = Integer.parseInt(minute1);
              min2 = Integer.parseInt(minute2);
              sec1 = Integer.parseInt(second1);
              sec2 = Integer.parseInt(second2);
              mll1 = Integer.parseInt(mill1);
              mll2 = Integer.parseInt(mill2);
              g2D.setStroke(stroke);
              g2D.setPaint(Color.cyan);
              num.setSpacing(true,8);
              num.setSpacing(true,8);
              if(hr1==0&hr2==0){
                   num.drawNumber(1,g2D);
                   num.setLocation(40,10);
                   num.drawNumber(2,g2D);
              else{
                   if(!(hr1 == 0)){     
                        num.drawNumber(hr1,g2D);
                   num.setLocation(40,10);
                   num.drawNumber(hr2,g2D);
              num.setLocation(70,10);
              num.drawNumber(DigitalNumber.DOTS,g2D);
              num.setLocation(100,10);
              num.drawNumber(min1,g2D);
              num.setLocation(130,10);
              num.drawNumber(min2,g2D);
              num.setLocation(160,10);
              num.drawNumber(DigitalNumber.DOTS,g2D);
              num.setLocation(190,10);
              num.drawNumber(sec1,g2D);
              num.setLocation(220,10);
              num.drawNumber(sec2,g2D);
              /*num.setLocation(250,10);
              num.drawNumber(DigitalNumber.DOTS,g2D);
              num.setLocation(280,10);
              num.drawNumber(mll1,g2D);
              num.setLocation(310,10);
              num.drawNumber(mll2,g2D);
              g2D.setPaint(Color.cyan);
              if((c.get(Calendar.AM_PM))==Calendar.AM){               
                   g2D.drawString("AM",260,20);
              }else{
                   g2D.drawString("PM",260,20);
         String dayOfweek = "";     
         switch(c.get(Calendar.DAY_OF_WEEK)){
              case(Calendar.SUNDAY):
                   dayOfweek = "Sunday, ";
                   break;
              case(Calendar.MONDAY):
                   dayOfweek = "Monday, ";
                   break;
              case(Calendar.TUESDAY):
                   dayOfweek = "Tuesday, ";
                   break;
              case(Calendar.WEDNESDAY):
                   dayOfweek = "Wednesday, ";
                   break;
              case(Calendar.THURSDAY):
                   dayOfweek = "Thursday, ";
                   break;
              case(Calendar.FRIDAY):
                   dayOfweek = "Friday, ";
                   break;
              case(Calendar.SATURDAY):
                   dayOfweek = "Saturday, ";
                   break;
         String month = "";     
         switch(c.get(Calendar.MONTH)){
              case(Calendar.JANUARY):
                   month = "January ";
                   break;
              case(Calendar.FEBRUARY):
                   month = "February ";
                   break;
              case(Calendar.MARCH):
                   month = "March ";
                   break;
              case(Calendar.APRIL):
                   month = "April ";
                   break;
              case(Calendar.MAY):
                   month = "May ";
                   break;
              case(Calendar.JUNE):
                   month = "June ";
                   break;
              case(Calendar.JULY):
                   month = "July ";
                   break;
              case(Calendar.AUGUST):
                   month = "August ";
                   break;
              case(Calendar.SEPTEMBER):
                   month = "September ";
                   break;
              case(Calendar.OCTOBER):
                   month = "October ";
                   break;
              case(Calendar.NOVEMBER):
                   month = "November ";
                   break;
              case(Calendar.DECEMBER):
                   month = "December ";
                   break;
         int day = c.get(Calendar.DAY_OF_MONTH);
         int year = c.get(Calendar.YEAR);
         Font font = new Font("serif",Font.PLAIN,24);
         g2D.setFont(font);
         g2D.drawString(dayOfweek+month+day+", "+year,10,80);
         public static void main(String args[]){
              AppFrame aframe = new AppFrame("Digital Clock");
              Container cpane = aframe.getContentPane();
              final DigitalClock dc = new DigitalClock();
              dc.setBackground(Color.black);
              cpane.add(dc,BorderLayout.CENTER);
              aframe.setSize(310,120);
              aframe.setVisible(true);
              class Task extends TimerTask {
                 public void run() {
                      dc.repaint();
              java.util.Timer timer = new java.util.Timer();
             timer.schedule(new Task(),0L,250L);
    class DigitalNumber {
         private float x=0;
         private float y=0;
         private float size=5;
         private int number;
         private Shape s;
         private float space = 0;
         public static final int DOTS = 10;
         private Color on,off;
         DigitalNumber(){          
              this(0f,0f,5f,Color.cyan,Color.black);          
         DigitalNumber(float x,float y, float size,Color on,Color off){
              this.x = x;
              this.y = y;
              this.size = size;
              this.on = on;
              this.off = off;
         public void drawNumber(int number,Graphics2D g){
              int flag = 0;
              switch(number){
                   case(0):          
                        flag = 125;
                        break;
                   case(1):
                        flag = 96;
                        break;
                   case(2):
                        flag = 55;
                        break;
                   case(3):
                        flag = 103;
                        break;
                   case(4):
                        flag = 106;
                        break;
                   case(5):
                        flag = 79;
                        break;
                   case(6):
                        flag = 94;
                        break;
                   case(7):
                        flag = 97;
                        break;
                   case(8):
                        flag = 127;
                        break;
                   case(9):
                        flag = 107;
                        break;
                   case(DOTS):
                        GeneralPath path = new GeneralPath();
                        path.moveTo(x+(size/2),y+(size/2)-1);
                        path.lineTo(x+(size/2),y+(size/2)+1);
                        path.moveTo(x+(size/2),y+(size/2)+size-1);
                        path.lineTo(x+(size/2),y+(size/2)+size+1);
                        g.setPaint(on);
                        g.draw(path);     
                        return;
              //Top          
              if((flag & 1) == 1){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath Top = new GeneralPath();
              Top.moveTo(x + space, y);
              Top.lineTo(x + size - space, y);
              g.draw(Top);
              //Middle
              if((flag & 2) == 2){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath Middle = new GeneralPath();
              Middle.moveTo(x + space, y + size); 
              Middle.lineTo(x + size - space,y + size);     
              g.draw(Middle);
              //Bottom
              if((flag & 4) == 4){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath Bottom = new GeneralPath();
              Bottom.moveTo(x + space, y + (size * 2));  
              Bottom.lineTo(x + size - space, y + (size * 2));
              g.draw(Bottom);
              //TopLeft
              if((flag & 8) == 8){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath TopLeft = new GeneralPath();     
              TopLeft.moveTo(x, y + space);
              TopLeft.lineTo(x, y + size - space);          
              g.draw(TopLeft);
              //BottomLeft
              if((flag & 16) == 16){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath BottomLeft = new GeneralPath();     
              BottomLeft.moveTo(x, y + size + space);
              BottomLeft.lineTo(x, y + (size * 2) - space);
              g.draw(BottomLeft);
              //TopRight
              if((flag & 32) == 32){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath TopRight = new GeneralPath();     
              TopRight.moveTo(x + size, y + space);
              TopRight.lineTo(x + size, y + size - space);
              g.draw(TopRight);
              //BottomRight
              if((flag & 64) == 64){
                   g.setPaint(on);
              }else{
                   g.setPaint(off);
              GeneralPath BottomRight = new GeneralPath();     
              BottomRight.moveTo(x + size, y + size + space);
              BottomRight.lineTo(x + size, y + (size * 2) - space);
              g.draw(BottomRight);
         public void setSpacing(boolean spacingOn){
              if(spacingOn == false){
                   space = 0;
              else{
                   this.setSpacing(spacingOn,5f);
         public void setSpacing(boolean spacingOn,float gap){
              if(gap<2){
                   gap = 2;
              if(spacingOn == true){
                   space = size/gap;
         public void setLocation(float x,float y){
              this.x = x;
              this.y = y;
         public void setSize(float size){
              this.size = size;
    class AppFrame extends JFrame{
         AppFrame(){
              this("Demo Frame");
         AppFrame(String title){
              super(title);
              setSize(500,500);
              setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    }

Maybe you are looking for