My switch Linksys srw224g4 has problem and I need someone help
Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
Tien
Hi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help.
Similar Messages
-
Weird problem and I need your help!
Hello,
I'll keep this short and hopefully someone will be able to give me a simple answer to this problem - it's been driving me nuts for days!
Here's the situation, as concise as I can be:
- import clips from my video camera to iMovie, no problem
- sort clips, edit them, throw them into the timeline, no problem
- add transitions, effects, titles, no problem
- export to Quicktime so I can watch it on my computer and share it on my computer network - no problem, the movie looks great
Here's the problem!
- I now want to burn the Quicktime movie, as is, on to a DVD
- I put the movie into Toast, tell it to do what it does
- Toast burns great
- When I watch the DVD, there's a constant weird flickering, especially when the camera is moving. It's not anything extra, it's like a kind of strobe effect on the whole thing. It looks almost like it's having trouble keeping up with the picture. I wish I could show you but it only happens with a DVD player... and I've tried it on several TVs and DVD players.
I've burned AVI files with Toast the exact same way and have no problems.
What am I doing wrong? I don't want to use iDVD because I don't want any menus and titles and all that - just the movie. It looks great on my computer but as soon as I watch it on a TV, it looks like ... well, it flickers. I've tried burning with different settings and resolutions, but it always comes out the same.
I hope this makes sense to someone. Help?
tubaindy
ps. In case you are wondering, I need it on DVD to mail to some relatives overseas who are afraid of new things - but they are able to put a DVD in the tray, which is all I want... they put in the DVD, it plays a movie. That's all.1. Start up Terminal by using Spotlight or starting it from Applications -> Utilities
2. Type: killall OpaqueMenuBar (case sensitive spelling)
Nothing should come up as a result. If it says "no processes belong to you were found" check the spelling or skip to the next step
3. Go to your applications folder (commandshiftA in Finder) and drag the OpaqueMenuBar app to the trash
4. Go into the System Preferences -> Desktop, change the wallpaper to something else and then back again.
Uninstallation should be complete. -
I purchased gems from the game legends at war and the game has problems and I've lost the things I've paid good money for how do I get a refund gree offer no support it takes days to get a reply then they offer no help, if Ive paid for something I expect to get it and being a paying customer I expect support when there is problems
Simon ~ Welcome to the Support Communities. See the iTunes Store option here:
http://www.apple.com/support/itunes/contact/ -
Customer id:0328990515 My laptop has problem and has to be refreshed and to re-install adobe photosh
customer id no 0328990515
my laptop has problem and has to be refreshed and to re-install the adobe photoshop cs6 extended. But after running the "initalling installer", nothing happened. Cannot re-install the adobe photoshop cs6 extended.
Need urgent help as it is essential for my study.
Thanksuninstall ps cs6.
run the cleaner (http://www.adobe.com/support/contact/cscleanertool.html).
restart you computer.
reinstall ps cs6 ext. -
Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !
But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!
-
I cannot use my Acrobat XI downloaded with my one year subscription. It tells me my trial has expired and i need to license it. but I have no serial number.
Rave,
I have the same problem. It says trial is expired, so I select the "sign in now" button. After sign in, it comes up with a place to enter a serial number. The only two other options are "back" and "next".
-Radfuehrer -
HP Sprinter show error while running new rest as "An error has occured and Sprintet needs to close."
Hi All,
I have installed and prepared one Data Injection scenario and then have Run the test couple of times and then closed Sprinter. Then I create another Data Inject test and "DataInjextExample.xls" and have added it in "Add Data Set".
When i execute this new Data Inject Test, it shows me error with referance to a data field ('Full name of first or sole applicant") from earlier Test's Excel data sheet where as I have alreadty removed DataSet referance from the "Add Data Set".
Error message:
An error has occured and Sprintet needs to close. " type does not have property named 'Full name of first or sole applicant", so cannot dort data collection.
Please see the following error and help me with possible solution.
Thanks,
asandyHi, Once you launch Sprinter, make sure the Sprinter Agent is running.
Now go to the Notification area and uncheck the option which says "Start Sprinter Agent when Computer Starts"
Click on Reset.
Restart the computer and start working on HP Sprinter.
Please let me know if this worked.
Thanks & Regards
Gaurav -
My IPod no longer shuffles songs within playlists that are clearly set to shuffle. It is about 3/4 full so I thought of maybe compressing the files to get more space. Do you think that is the problem and if that might help?
Storage space on the iPod would not affect shuffled playlists or playlist shuffling, though substantially full iPods may wind up skipping songs on larger playlists after a while, and require a restart. As for compressing the files themselves, you can automatically re-encode files to a lower bitrate by checking the box on the summary page when your iPod is connected to your PC/Mac.
As for the shuffle problem, after restarting your iPod (hold the center button and Menu for a few seconds, until the Apple logo appears), make sure you're telling the iPod to shuffle the songs in a playlist by repeatedly clicking the center button until the Suffle Menu comes up, then scroll to the right to turn it on. From that song forward, the playlists' contents should be shuffled every time the playlist ends, or is accessed from a new song.
Shuffle does sometimes turn itself off, I've found, so double-check the setting is still on. Also, iPods shuffle by randomly assigning a playlist order for your songs, which is different from traditional shuffle (on, say, iTunes or Windows Media Player, where the new song is determined at random upon the current track ending. The iPod only chooses a random order of songs when you shuffle, to conserve battery life and queue up songs coming up on the playlist in the event of a shock). -
My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed
My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed
The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage
-
can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market
Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
Java is vulnerable… Again?!
http://java-0day.com -
How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
My iTunes on my iPhone 5 got switched to the UK iTunes and i need the US iTunes I go to switch it back in settings and it says that I have store credit witch is 16 cents and I have to spend it in order to chane the iTunes can y'all help?
My iTunes on my iPhone 5 got switched to the UK iTunes and i need the US iTunes I go to switch it back in settings and it says that I have store credit witch is 16 cents and I have to spend it in order to chane the iTunes can y'all help?
-
Purchased Creativesuite Premium (CreativeSuite 1.1) over 10 years ago and I have sinced changed my computer. Even though I have transfered all my programs and my files photoshop is now telling me my trial period has ended and I need to register or activate my program but I cannot.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Mylenium -
Need someone helps for several Problems on my 9630 Tour
Hello,
Well, these are list of problems with my 9630 Tour, and I need some helps to solve these :
1. My 1st problem is, everytime my 9630 started its also a message appears : "uncaught exception index 8 >= 8"
2. And I also realized that some missing application happened. My m-Banking application (already re-installed well) but it also lost of SMS icon. So the result is, everytime I sent an outgoing SMS I couldn't save it. And I have made a test to sent SMS from my other number to this 9630 device, but 9630 couldn't show that any incoming message, even my other device has given me notification that message has been delivered.
3. Its also often shutdown suddenly by itself, or its shutdown upon charging
4. Charging tasks sometime couldn't be well charged. And finally I realized that my device has off in the middle of charging task, it may caused of charging wasn't recharge the device very well
Hopefully I can read your kindly solution on those problems happened. Thank you for your prompt response.
Anwar HusseinHi and Welcome to the Community!
I actually think that all of your issues are related, and rooted in the same problem...OS corruption or hardware failure. But, before you begin, please be sure you have a good backup...see the link in my auto-sig on this post for instructions for that process.
Then, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Maybe you are looking for
-
Duplicate line in Global variable
Hi Experts, I have one BODS job which will load the data from BW to Non SAP. As per my business requirement I have to trigger this job from BW Process chain. For that I have added BODS job in Process Chain Variant and given input to global variable
-
Sales order with project system
Hi, Is any one can explain for the mentioned scenerio pl: In production cost by Sales order, is production / process order will be linked for production booking or always is it best to implement the make to order with project systems - Sales & Proces
-
I am using Firefox 16.0.1 on a macbook pro using 10.7.5 software. When I access a picture directly, I am unable to advance the photo forwards or backwards using the mouse/cursor or the arrow keys. The same is true if I use an external mouse. If I use
-
When I use FaceTime on iPhone 5 people I call can not hear me.
When I use FaceTime on iPhone 5 people I call can not hear me. Anyone can help me?
-
Saving images on my database and calling the open file dialog
i want to be able to save image in my database or alternatively save them on a file system. meanwhile i want to allow them choose the name of the image in the folder by using the win_api_dialog.open_file. My platform is win2000. do i need to add any