My system can't detect Videocam thru firewire

I have tried to connect my videocam to my PC thru firewire.
After connect, I on my Videocam (set to video mode) but XP can't detect any new device. ???
I have tried lugging the 6 pin firewire to the back of the CPU and also onto the optional IEEE 1394 connectors using the IEEE1394 bracket.
I have check the BIOS and the IEEE1394 is ENABLED.
When I view the network connection under LAN or High-Speed Internet, the 1394 connection shown
Connected, Firewired
1394 Net adaptor
My Videocam is JVC GR-D270.
I currently do not have any software to capture the video other than window movie maker.
Appreciate if someone can advise on how to go abt this problem.
Thank

Quote
After connect, I on my Videocam (set to video mode)
Did you already try ALL possible modes on the videocam? Did you check the videocam's manual that video mode is the correct setting for making contact with the computer?

Similar Messages

  • I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
    Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
    On your new MacBook Pro open "Migration Assistant" in your utilities folder.
    Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

  • The operating system can not detect my wireless device!

    Hi all,
    I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

    The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • System can not detect X-Fi Titanium

    # Hello,
    A few days ago I purchased a Creative X-Fi Titanium and have installed it into a PCI Express slot on my motherboard, however, the system seems completely unable to detect it. I'm running Windows Vista x64 and no new devices have appeared in Device Manager, but I don't think this is at all OS related, as the card does not appear in any way in the PCI Devices Table that you will usually see on most motherboards after BIOS POST but just before boot-up of the operating system begins.
    Unfortunately, I can't use any of the other two PCI Express slots on my motherboard as I'm running a CrossFireX setup; one of the slots is obstructed by a graphics card fan and the other would almost certainly create some cooling issues, so this is the only slot I can safely use. The motherboard is a Gigabyte GA-EP35-DS3P running the absolute latest BIOS, F6a. It's a beta BIOS, but I needed to install it to get the CrossFireX setup to work correctly.
    I want to know if there's anything else I can try to get this card to work? It's brand new, and I don't want to start the whole warranty process unless I'm reasonably certain the card is at fault. Unfortunately, I don't have another machine with PCI Express slots I can test the card in.
    So can anyone suggest anything? I've been reading up on google and it seems a number of people have had problems with this card, various incompatibilities for instance, so I don't appear to be alone.
    Thanks for any help.

    ' Thanks for the suggestions, but I finally found the problem.
    It turns out that on my motherboard, the second PCIe x6 slot shares the same bus as the three PCIe x slots. As such, when running a CrossFireX setup (dual graphics cards) the x slots are inoperable. I'm not sure if this is a limitation of the Intel P35 chipset or specific to the design of this particular motherboard, I am leaning towards the former however. Upgrading to a P45 based motherboard should remedy the [email protected]

  • My Macbook Pro can't detect or read my CDFS file system external HDD

    My Macbook Pro can't detect or read my CDFS file system external HDD

    Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

  • Macbook Pro retina display 13 inch stopped charging. Charger LED also not on while plugged in. The battery fully drained off but the system can detect the charger when it was switched on.

    Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.

    Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
    You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem.

  • My bluetooth system can't read or detect my bluetooth device, any help?

    My bluetooth system can't read or detect my bluetooth device, any help?

    What bluetooth system?
    What bluetooth device?
    Please explain

  • How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?

    How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?
    Do I need to buy an adapter? How do I setup the software to make these two system connected?

    r95941081 wrote:
    Thanks for your answering. But the issue is that I'll often transfer a large amount files from PCs to the Macbook, and I'm explring the way to use firewire since there is indeed an i-S400 port in the VAIO laptop, and it's much faster.
    USB 2 is faster than Firewire 400 and USB 3 is faster than Firewire 800
    If it was another Mac you were transferring from then you could use Firewire Target Disk Mode which makes the boot drive of the old Mac appear on the desktop of the new Mac to rapidly copy files, but you have a Windows PC with no FWTDM capability.
    So to connect the two machines requires a network be setup over Ethernet and mucking around with the complexities of all that and it still takes awhile to finish. One can't setup a network with a PC over USB or Firewire, only Firewire with another Mac.
    You get a external USB drive, USB 3,2,1 is fine and just drag and drop copy, the machine does all the work and you go do something else until it's finished, then repeat the same with the Mac.
    Fast simple and effective, let it copy overnight if you have too.
    I routinely clone my entire hard drive via USB 2 and it only takes a hour and a half for 350GB.
    By the time you figure out how to network a Mac and a PC over Ethernet and getting it work to transfer files, you could be done already via USB.

  • Lost my aggregate device???  forget how to add so can record thru firewire thanks

    lost my aggregate device??? It just went away, no changes made!!  forget how to add the aggregate device so can record with external mics thru firewire usinf GBand  thanks

    Basswoman wrote:
    forget how to add the aggregate device
    perhaps this will help:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can't detect a German PC wireless network I know is there

    Hi,
    I'm new to this forum and I hope someone can help me.
    I'm visiting friends in Berlin from Canada with my Powerbook G4 with OS10.4.11. I can't detect my host's wireless network even though I can detect 24 other wireless networks in her apartment building (I downloaded MacStumbler and used it to check). I know her network ("Jenny") is not hidden because she got a friend across the courtyard the same apartment building to check if she could see it on her computer this morning, which she could. I also tried to find "Jenny" by clicking on "Other" and then entering "Jenny" in "Network Name" and entering the WAP password my friend gave me (I also checked that with her so I know it is right) under both WPA Personal and WPA2 Personal. That didn't work either. I also followed advice on this forum and got rid of that stupid pop-up box saying "Your Network Settings have been changed by another application" when I clicked on System Preferences/Network
    What should I do? All my friend knows is that she has a PC, she doesn't know the brand or model of her router or her ISP provider. If I can't solve this, I will be in big trouble as I had planned to stay in Berlin for a few months using my friend's wireless network to get online every day. I can get online fine via her router when I have a cable plugged into my computer in her flat, but I am staying across the courtyard in their second flat and we can't string a cable across the courtyard... I've never had problems before connecting with any PC wireless network, in Europe or N. America.
    Very grateful for any help.

    It won't let me do that. When I go to the Network window of my System Preferences, it says Location: Automatic, and it won't let me click on New Location or on Edit Locations - they are pale grey.
    Also, it says Show Network Port Configurations and it gives me six: Internal Modem, Airport, Bluetooth, Built-in Ethernet, Built-in Firewire, VPN (L2TP) whatever that is, and Ethernet Adaptor (en2), and I don't know if that is the cable from my friend's router or the new stick adaptor I bought (it doesn't change, whichever I have plugged in), but all these are also pale grey and I can't click on them or on the boxes marked New Rename Delete or Duplicate.
    Also the stick adaptor I bought is not showing up in my Finder window as an attached device - shouldn't it? This means I can't eject it safely when I want to. There are no instructions enclosed with it or on the manufacturer's website.
    When I click on Network Status with the cable attached, it says I am currently connected to the Internet via built-in Ethernet with the IP address 192.168.0.112 so I guess built-in Ethernet must be the cable. So if the Ethernet Adaptor (en2) is the adaptor stick, maybe it isn't being recognized by my computer because it is on channel 13?

  • DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

    I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
    Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
    I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
    When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0005h (I/O Access, BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h Unknown
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 0000A800h
    System IRQ 5, INT# A
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
    Vendor 02h Creative Labs
    Device 0002h EMU0K Audio Chipset (SB Li've!)
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 04h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 002002h CT4850 SBLi've! Value
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00009000h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 7002h PCI Gameport Joystick
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 0h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Input, type Other
    Subsystem ID 002002h PCI Gameport Joystick
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008800h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008400h
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    (Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
    So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
    I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
    I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
    Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
    Cheers,
    Russ.

    Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
    The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
    Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

  • APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

    just a summary...
    i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
    now, back to the topic..
    so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
    so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
    i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
    the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
    so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
    so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
    and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
    so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
    Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
    i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
    so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
    "4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
    If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
    so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
    after reinstallation of itunes my DVD drive can be seen and just  noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
    so going back to the topic..
    i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
    so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
    so now i opened iTunes and BOOOM!
    iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
    so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
    so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
    Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
    if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
    [for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
    and then you will see the screen below
    click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
    BUT the problem here is that your iPhone can't be detected on iTunes...
    now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
    click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
    SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
    i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
    PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
    Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

    Hi LSGZ,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    - Brenden

  • How can I detect a dialog and respond?

    I'm having trouble doing something that's probably not that hard. I'm trying to "Print to PDF" a bunch of old AppleWorks documents. When you open a document created in AppleWorks v6 it opens right up, but when you open a document created in AppleWorks 5 you get a dialog box that says, "This document was created by a previous version of AppleWorks. A copy will be opened and "[v6.0]" will be added to the filename."
    Right now I open the file and then:
    tell application "AppleWorks 6"
            activate
            repeat while not (exists front document)
                    delay .2
            end repeat
    end tell
    When the dialog box pops up, there's no front document so the whole thing freezes until you hit OK. How can I detect this dialog box and dismiss it?
    Thanks
    PS
    When the box is open I ran this and got this result:
    /usr/bin/osascript -e 'tell application "System Events" to get properties of windows of application process "AppleWorks 6"'
    minimum value:missing value, orientation:missing value, position:436, 153, class:window, role description:dialog, accessibility description:missing value, focused:missing value, title:missing value, size:412, 123, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXDialog, selected:missing value, name:missing value, description:dialog, minimum value:missing value, orientation:missing value, position:8, 76, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Starting Points, size:631, 189, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Starting Points, description:floating window, minimum value:missing value, orientation:missing value, position:4, 22, class:window, role description:floating window, accessibility description:missing value, focused:missing value, title:Button Bar, size:612, 51, value:missing value, help:missing value, enabled:missing value, maximum value:missing value, role:AXWindow, entire contents:, subrole:AXFloatingWindow, selected:missing value, name:Button Bar, description:floating window

    Hi,
    The simplest would be to set the application preferences in the script.
    Like this :
    -- *** set prefs ****
    tell application "AppleWorks 6"
          activate
          set oldPrefs to its preferences
          copy oldPrefs to tPrefs
          tell tPrefs
                set old version warning to false --doesn't show the old version warning alert  
                set converted file suffix to true -- append “[v6.0]” to documents converted from older formats
                set locked file warning to false
                set paint reduction warning to false
          end tell
          set preferences to tPrefs
    end tell
    -- *** end set prefs ****
    --**** your script, example ***
    set tfiles to choose file with multiple selections allowed
    tell application "AppleWorks 6"
          repeat with i in tfiles
                open i
                tell front document
                      -- do something
                end tell
          end repeat
    end tell
    --**** end  your script ***
    -- *** reset prefs ****
    tell application "AppleWorks 6" to set preferences to oldPrefs

  • How can I detect a certain text within a field within CASE using IF

    Dear all,
    for a transformation / generation of values receiving from R/3 into BW I try to
    manupulate three fields. I have a problem detecting a string in a field.
    I am using a CASE with several WHEN clauses on one field. Depending on the
    value, an IF is integrated. There I look into another field evaluating, if it contains
    a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
    System gives error for the locigal expression. I also tried CS, but same error.
    How can I detect a certain text within a field and which is the right logical
    expression.
    Many thanks in advance!!!
    Claudia

    Hi,
    Folow the blow example...
    May be it helps....
    DATA: hex1 TYPE string,
          hex2 TYPE string.
    hex1 = 'FFFF'.
    hex2 = '123FF'.
    IF hex1 CP hex2.
    ENDIF.
    Cheers,
    SImha.

  • How can i detect if my PC is not on Network..... Urgent Pls Help Soon !!!!!

    Hello Everyone,
    We all know whenever we try to connect to a PC which is not on network, we get UnKnownHostException etc..... by which we can detect that the corresponding PC is not an network(intranet/internet)
    But when i send a msg from my PC to my PC, it works fine even if the network is down. I hv provided my PC's IP address instead of using localhost or 127.0.0.1 which reduces the possibility that the msg will not be traversed thru the network.
    Any IDEA how this works.
    Is There any possible way by which i can detect that my PC is not on network or the PC to which i'm trying to connect is not on network .......
    Pls help me out, its really urgent as to be implemented in my Project
    Thanks In Advance
    Sahil Shaikh

    Hello Surtee
    I have developed a Messeging Service for the eCRM Apllication my company is developing and we r in the final stage of debugging.
    Now whenever a user sends a msg to a PC which is not on network, the messaging service automatically sends an Offline mssg to that PC. But know i want ot distinguish wheather the PC to which i'm sending the msg is not on network or am I not on network based on this i need to perform diff. actions, hence i wanted to know that how can i detect .......
    Pls see if u canhelp me out ......
    Thanks
    Sahil Shaikh

Maybe you are looking for