My system freezes during start-up "for first time" after running System Recovery.

HP G62-227CL
Win 7 (64 bit)
No error message, per se; just a frozen screen during reboot.
Months ago, my computer suddenly started glitching on me. I shut down and tried a reboot. The system froze on the boot screen with the flying colors. Tried system recovery several times but must have done something wrong because it would not run. Resolved to buy a new hard drive and reinstall from recovery discs. Delayed for no good reason until today, months later.
Before buying new hard drive, decided to run System Recovery again. It worked! I tried the option that deleted everything and restored to original factory settings and software. Everything appeared to work like a charm: hard drive reformatted, software reinstalled, system prompted me for a reboot. I did. Windows started to start, "Setup preparting your computer for the first use" appears . . . and freezes. For hours. Hard drive indicator light is off.
BTW, made sure that the Wi-Fi button was on as I read about Recovery issues if it was off when the program ran.
Rebooted. Hit F11. Ran maintenance and checked hard drive for errors. There are errors. Unfortunately, the default setting of CHKDSK does not repair them. Opted for a command prompt. Rand CHKDSK again with "/f /r" option seen in other posts. I'm too ignorant here to get the program to run properly, I guess. I ran CHKDSK on both drive X and C. No errors found . . . sort of. I know they exist because the system will not boot up. (Yes, I tried again.) Back at command prompt, I tried to run CHKDSK on drive C again. This time I received a message that I would first have to unmount (dismount?) the drive. As I do not know what this means, I opted for "no" and have decided to post this message for assistance.
So. Suggestions on what I do next? More specifically: how do I get CHKDSK to repair the errors it found? I believe the message was: "Errors in $130 of sector . . ." It displays this message twice at 62% completion. Freezes for a long time. Gets going again only to slow to a crawl again around 70% but for not as long. Then returns back to the start screen of System Recovery.
Ran System Recovery again for kicks. Again, appeared to work like a charm. Unfortunately, the laptop is once again sitting frozen on the "Preparing . . . for first use" screen again. It is getting hotter the longer it sits. The fan is now audibly running at higher rpms . . . if any of that helps. I'm shutting it down and waiting for your advice.
Thanks!
This question was solved.
View Solution.

Hello Miles1966. I understand you're experiencing some issues with your notebook freezing.
This does sound like a hard drive problem. The freezes, missing HDD indicator light, and inability to perform a recovery are all symptoms of a failing hard drive. You had been using CHKDISK previously but have you tried running the diagnostic which is built into the BIOS? Try following these steps and post the result of the diagnostic. I suggest running the memory test as well just in case.
Let me know the result of these diagnostics. I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Performance issue in browsing SSAS cube using Excel for first time after cube refresh

Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.

Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway

Starting CMS for first time - cannot log on successfully

Hi, I am installing CRXI Server edition on a server running SQL2000. We have recently bought a new server to replace an old one, so we are trying to recreate the settings of our previous server. SQL runs great, but I cannot log on to the CMS. When installing I got a message saying the install cannot log on and that I need to check my credentials. I've tried everything. I heard the default was "administrator" with no password, and enterprise authentication and that doesn't work either. My domain or local credentials are also unsuccessful. Please help! Is there some sort of issue with SQL or???
Any help is greatly appreciated!

Yes, cms.exe is running in task manager, but in Services it is stuck in "starting" mode (this is also the case in the central configuration manager) I couldn't get this service to restart after I changed the DSN.
When I try starting the Business View Manager I get the following error: Could Not Start WinSock DLL, error: 0x276b.
When I try loggin on to BOE I get this error: The system myserver.domain.pvt can be contacted, but there is no CMS running at port 6400.
Also, when I originally installed it and it asked me to log on to the CMSfor the first time, I got an error that the install could not log me on because my username and password were incorrect. (I didn't write down that exact error, and don't know how to recreate it.)
I'm reinstalling now for the 3rd time, because I didn't know how to get that service "unstuck"... not sure what to do when I install though...

Starting IMac for first time without the paired bluetooth mouse

I bought an iMac at the Apple Store today. I wanted a trackpad rather than a mouse. He pulled the mouse from the box and inserted the trackpad. I got home, booted up for the first time, and it wants me to turn on the factory-paired mouse that I don't have. I can't get past this screen to pair the bluetooth trackpad instead.
The keyboard is paired and functional, but I can't find anything that bypasses the screen telling me graphically that I need to turn on the mouse. I do not have a wired mouse to plug in, even if that would work.
Thoughts?

No, it insisted on a mouse. I did, however, find an old wired mouse (didn't think I had any left), and once I plugged that in, it bypassed the screen telling me to turn on the wireless mouse. Then I set up the trackpad using the setttings.

JDeveloper start VERY slowly first time after power cycle

I'm running JDeveloper Version 9.0.2 in a classroom situation on about 15 Win-2000 machines (aprox 700Mz). The first time jdevw.exe is launched after power up, it takes 5-7 minutes before the splash screen appears. Re-launching the applcation subsequent times takes 10-20 seconds for the splash screen to appear. The taskmanager show 100% CPU Usage during the 5-7 minute period. Any suggestions?
Thanks,
Ralph Wieland

Do you have any virus checker installed? Some of them want to check each and every .zip and .jar file before they OK the use of these libraries.
Georg
JDev Team

TS1398 Cannot connect to internet by WIFI for first time (after active iphone by iTune, because cannot use WIFI to active)

I just bought a iphone 5 32GB White from Apple store. However, the first time i turn on my iphone, it cannot use WIFI to connect. Meanwhile, another device still can connect WIFI normally (example: computer, my another iphone 5 16GB)

Please help me
I tried many way to use WIFI on my iphone 5 with IOS 6.0.1. But cannot
_Turn off and on WIFI
_Reset Network Settings
_Update to IOS 6.0.2
Blah blah blah
P/s: because this is the first time my iphone turn on for active, so it has'nt connected with any Networks before.

Error when starting UI for first time (Identity Management 7.1)

Hello. I've installed Identity Management 7.1 on top of a fresh Netweaver 7.0 (patch 17)
Now,I want the UI up and going. I've used the SAP-NW_IdM_IC_Install_IdMUI_7-1.pdf document as reference for setup. I can't find anything missing but still i get an errormessage when trying the http:// (Welcome)
! Java.lang.NullPointerException
Tjenesten er nede (Service is Down)
Kan ikke hente MSKEY for sperret bruker (Cannot get MSKEY for locked user)
What's wrong?
Appreciate some help
Regards Günther Schnell

I too encountered this error. After taking a look at the default trace file I observed the following error:
Error#1#/System/Database/sql/jdbc/direct#Java#com.sap.sql_0003##SQL error occurred on connection CLKLABVM3
IDM:mxmc_db:dbo: code=207, state="S0001", message="Invalid column name 'recoverpwdfailtask'."; SQL statement is "select is_id,resultsize, workflowrepository,enablepwdprovisioning,PwdUseDictionary,ChkPwdHistory,wfWelcomeFieldHeader,wFwelcomeFieldFooter, recoverpwdtask, recoverpwdfailtask,authqminvalues,authqalternateattr,authqalternateboth,authqalgorithm,authqpar1,authqpar2,authqpar3,authqgetpwdmethod,authqaddpwdtoume, maxloginattempts,authqStep1,authqStep2,authqStep3,authqStep4 from mxi_idstores where is_id=?".
In order to resolve this, I had to apply the latest update (ICDESIGNTIME01_0-10007480) for the IDM design time. The update will add the missing column tot he table structure.
As per the instructions, ensure that you make a backup of your database before applying the patch.

Entire System Freezes once the phone is turned on after the system update

I recently updated my software, and now whenever I turn the phone on, it instantly freezes. Nothing works, not even the clock. When I press the power button to put it into sleep mode, a blank screen reappears where only the top bar is visible. It is impossible to turn the phone off with the power button...only removing the battery works.
What's going on with this?

Hello,
I understand your frustration regarding the screen on your Droid X. Thank you Cody21 for your suggestion to clear the cache. Have you attempted these steps? I have listed them below.
Wiping cache partition - cures many ills and is better to start with this than a full Factory Reset.
Power off
Power On Holding Home Key
When the Android with Exclamation Point Shows up Press BOTH Volume keys
Use Volume Keys to navigate to "wipe cache partition" and tap power button to select
Wait for it to finish and select reboot system
If this does not resolve the issue for you, please complete a master reset. I have listed these steps below.
Please note: The master reset erases all data from your phone, including your Google or other email account settings, system and application data and settings, and downloaded applications. It resets your device back to it's original settings. It will not erase current system software and bundled applications, or files stored on an optional installed memory card, such as music or photos. For this reason, please make sure that the data on your device is backed up.
Press and hold the Power button then select Power off. If the device isn't responding to input, remove / replace the battery.
Press and hold the Home key then press power button to turn on.
Press the Power button while holding Home.
From the Android Recovery screen (exclamation point with an android figure), press Volume Up / Down simultaneously.
Select wipe data / factory reset then press the Power button.
Select Yes -- delete all user data then press the Power button. Reset process to may take approximately 1 minute.
Ensure reboot system now is selected then press the Power button.
If you have any further issues, please feel free to send me a private message. I will be happy to assist you further.
Have a great day!

Starting up Leopard first time after installation

Just install Leopard onto imac G5 - dock appears - top bar appears - no desktop icons - just the cursor activity

Hi Daniel Ebeck;
I don't know why you say that you dislike the Upgrade path.
So for I have always used for all versions of OS X including Leopard. It has worked flawlessly for me on both my MacBook Pro and my PowerMac Quad.
Allan

Exception using ATG CSC for first time after installation/configuration

Hi,
I am getting the below error when i try to hit the csc url(http://localhost:8080/agent/). I have just installed/configured ATG CSC in my machine. Any help on this is welcome.
SOURCE EXCEPTION:
javax.servlet.ServletException: Can't find component named: /atg/agent/userprofiling/AgentProfileFormHandler
at atg.droplet.DropletDescriptor.setPropertyValue(DropletDescriptor.java:708)
at atg.taglib.dspjsp.SetValueTag.doStartTag(SetValueTag.java:282)
at org.apache.jsp.accessDenied_jsp._jspx_meth_dspel_005fsetvalue_005f0(accessDenied_jsp.java:1289)
at org.apache.jsp.accessDenied_jsp._jspx_meth_dspel_005fpage_005f1(accessDenied_jsp.java:995)
at org.apache.jsp.accessDenied_jsp._jspService(accessDenied_jsp.java:299)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:148)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:606)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:602)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:490)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:436)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:561)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1097)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:779)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:227)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:599)
at atg.servlet.GenericFilterService.handleDoFilter(GenericFilterService.java:462)
at atg.servlet.GenericFilterService.doFilter(GenericFilterService.java:409)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:662)
20:41:35,752 ERROR [DynamoServlet]
javax.servlet.jsp.JspTagException: java.lang.NullPointerException
at atg.svc.taglib.stateholder.RestoreStateTag.doStartTag(RestoreStateTag.java:81)
at org.apache.jsp.error_jsp._jspx_meth_svc_002dui_005frestoreState_005f0(error_jsp.java:766)
at org.apache.jsp.error_jsp._jspService(error_jsp.java:240)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:687)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:699)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:670)
at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:811)
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:784)
at org.apache.jsp.accessDenied_jsp._jspService(accessDenied_jsp.java:307)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:148)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:606)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:602)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:490)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:436)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:561)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1097)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:779)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:227)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:599)
at atg.servlet.GenericFilterService.handleDoFilter(GenericFilterService.java:462)
at atg.servlet.GenericFilterService.doFilter(GenericFilterService.java:409)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NullPointerException
at atg.svc.taglib.stateholder.RestoreStateTag.doStartTag(RestoreStateTag.java:75)
Thanks
Edited by: 979965 on Jan 4, 2013 7:22 AM

This could be a effect of some earlier exception. Can you look through the log to see if other exceptions are thrown.
You might also want to search AgentProfileFormHandler in your log to see if an exception is thrown while initializing the component

Z10 freezes during start up

My z10 freezes during start up. First I can see the red led on, then the BB logo and "blackberry" on the screen and it stays there forever.
I have tried to update the OS, using BB update software option, at which after resetting my Z10 the green led stays on, though I cannot update it, getting the error message "error downloading Blackberry Desktop Software".
Any ideas ? I need to recover information in the phone's internal memory.
Thank you !!!

So I did the Disc Utility, and the disc was sucessfully repaired. I restarted the iMac and got to exactly the same place as before: "Login window started" where it froze again. I turned it of, restarted in Safe Mode and it froze at the same spot.
Is the next step to try reinstalling the OSX? I didn't see an option to install in place ie leave all my files intact. There's an "Archive and install" option. Does this just archive the system folder and erase all my other files. I'm pretty much backed up but I'd much prefer not to erase the files if I can avoid it.
Thanks

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

Freezes during start up

My iMac 1.25GHz is freezing during start up. When I turn it on, I get the happy chime, the gray apple and cycling cog etc, it gets all the way to the text box that says "waiting for printing services" and then either the screen goes blue and the mouse arrow freezes or i get a dialog box saying I need to restart the computer. I've tried resetting the PRAM and PMU but no joy.
Any suggestions would be appreciated,
Thanks

So I did the Disc Utility, and the disc was sucessfully repaired. I restarted the iMac and got to exactly the same place as before: "Login window started" where it froze again. I turned it of, restarted in Safe Mode and it froze at the same spot.
Is the next step to try reinstalling the OSX? I didn't see an option to install in place ie leave all my files intact. There's an "Archive and install" option. Does this just archive the system folder and erase all my other files. I'm pretty much backed up but I'd much prefer not to erase the files if I can avoid it.
Thanks

MacBook Pro freezes during start up and safe boot

MacBook Pro freezes during start up and will not start in safe boot in recovery, it goes back to apple screen with spinning gear

Stinkster,
does your MacBook Pro have a removable battery? If so, then it originally came with grey installation DVDs. If it doesn’t have a removable battery, look on the bottom of your MacBook Pro for its serial number (it’s etched there in tiny print). If its serial number has eleven characters, write down the last three of them; if it has twelve, write down the last four. Include the three or four characters in your reply; they can determine which model MacBook Pro you have, and the model will determine whether it originally came with grey installation DVDs or not.
If your MacBook Pro did originally come with grey installation DVDs, then you’re going to need to find them (or buy a replacement pair from Apple or iFixit) to reïnstall Mac OS X on your current hard drive, or to install it on a replacement hard drive.

My system freezes during start-up "for first time" after running System Recovery.

Similar Messages

Maybe you are looking for