My System Hangs On Installing Update KB3001652

Hello:
Did anyone else's computer hang on update KB3001652?  After 4 hours, I hit the power button, only to have it come back to the same update?
Thanks,
Rich Locus, Logicwurks, LLC
http://www.logicwurks.com

Yes.  Several dozen users have reported the issue.  Completely power off.  When you power on choose Restart Normally and wait while any successful updates finish installing and the registry updates (won't take long).  When you are back
on the desktop start Windows Update.  You will see Important Updates Available.  Click the link to view the updates and uncheck the Visual Studio update.  Finish installing the remaining updates and restart.  When back on the desktop again
repeat the process with Windows Update (the checkmark next to the VS update returns every time you run WU).  Once no more important updates except the VS update show, you are done.  Wait for Microsoft to fix the issue before installing the VS update.
Colin Barnhorst Windows 7 Ultimate x64 on DIY with 8GB ram.

Similar Messages

  • HP Pavilion Windows 7 hanging on installing updates

    Desktop totally hung trying in install update 2 of 6. I let my pc restart for new updates but after downloading updates and system restart my pc is now hung installing updates. I can not get out of this situation. After hard power off and when I press F8 all that comes up is the Startup Menu. I do not see the option to boot in Safe Mode. When I exit the Startup Menu Windows resumes but then seconds later the screen shows installing update 2 of 6 appears again. It seems to be accessing the hard drive as the light continues to flash. After a few minutes the light stops flashing except for occasionally. Anyone have any ideas? Thanks!

    Update. Checked my October this morning and it was hanging in Shutdown mode. I waited a couple hours and decided to force a shutdown/power off. It seems to have passed where it had been hanging for 2 days and Windows started successfully. Running a full system virus scan now. So things appear to be improving.

  • [915 Series] System hang when installed CoreCenter

    After updated bios to version 1.7 and Core Center 2.0, my system hang after sometime running.
    When uninstalled CoreCenter, no problem now.
    If installed previous version Corecenter, it still hang.

    Many people here will tell you to dump CoreCenter. I don't use CoreCenter either. You'll find many here use Speedfan or MBM5 to monitor their temps and voltages. MBM5 is no longer developed and won't support your mobo. Speedfan is still updated and you also can control fans with this utility. Are soft OC'g with CC? Software OC'g is not recommended, but if you do soft OC, Clockgen is better program for doing so. I wouldn't. OC'g using the bios is considered the better method.
    Also, it's a good idea to read the stickies especially the one about posting.  As stated in the post I linked to, please include information about your system. See that post and my signature as an example.

  • Why system hang when install GeforceFX 5200?

    i am using the Asus A7V8X mainboard, Processor is the AlthonXP 1700+. Ram is Kingston 256 DDR 400.
    before when i use the geforce 2mx is no problem and good at using in WinXP. But, nearly time i was buy the MSI - 128MB DDR GeforceFX 5200 8X Graphics Card and try install it. When i install the driver come with cd bundled, the system was hang even i try restart and try install again but the problem still exist. then, i was go to the MSI offical website to download the newest driver again and try install again oso cannot. I have already done all i can do is update the vga driver and install VIA 4in1 but the problem still exist here. izzit my mainboard cannot compatible with the GeforceFX graphics card ?
    So, i have hope technican here can tell me what the problem is and how can solve this problem...
    thx you .

    Go to http://www.driverheaven.net and download "Driver Cleaner" Utility. follow the instructions on removing drivers from previous installs.
    Do not use the MSI Drivers, go to nVidia's website directly for VGA Drivers.
    Make sure you have the drivers downloaded to a directory prior to running driver cleaner so you can immediately install them afterwards.

  • System Hangs after kernel update

    Hi Experts,
       Client side, they did kernel upgrade in production system . After this upgrade , they are not able to execute any RFCs. Whenever they are executing RFCs , it keep on running continuously (hangs long time).. Not able to get any results.
    Please guide me how to handle this problem.
    Thanks
    Silviya

    Hi,
    Thanks for your reply.Just forget about kernel upgrade.In my client production, they are trying to execute RFC "RFC_ABAP_INSTALL_AND_RUN",,but the system continuously hanging for one week. They are not able to do anything with RFC. Other ABAP normal programs are working fine.
       They creating invoice by RFCs. Whenever they running this RFC , system gets hanging continuously. what may be the reason..and how to correct it .please guide me ASAP. I couldnt get content of sapnote 1151775. If you have sapnote 1151775 details , please give  me.
    Thanks a lot
    Silviya

  • 4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

    I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

    I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

  • Just updated to Yosemite, can't update or uninstall adobe flash, system hangs

    Just updated to Yosemite, can't update or uninstall adobe flash, system hangs, have to force quit,.
    Is this a problem with the new operating system and how do I fix this?

    If you can't install or update Flash, follow these instructions.

  • Cannot install OS (system hangs) on K7N2GM-L

    I've just put together a (mostly) new system.  The system posts OK, but when I try to install either Slackware or Win2k, the system hangs.  Slackware consistently hangs after recognizing the cd drive, with a message about a kernel bug, while Win2k hangs while loading hardware files, with a message about a registry error (As in a hardware registry, not the windows registry).  At one point, I was able to get slackware further in the install process, and even partitioned the hd, but I kept getting segfaults and then it would crash.
    [Update]:  Slackware actually hangs in one of two places.  Sometimes it hangs right after initializing the Ramdisk, at which poing it gives an eror about being "Unable to handle kernel NULL pointer dereference at virual address"  I get the CD error when FSB spectrum is set to .50, I get the ramdisk error when it is set to 1.00
    Things I've tried:
    I've tested both ram sticks individually.
    I've tried relaxing the memory timings, and changing the ram voltage.
    I've tried disabling external cache.
    Other info:
    System temperature: 30 degrees celsius
    CPU temp: 50 degrees celsius
    I had to manually tweak the FSB to 166 (was being registered at 100) and set the FSB/DDR ratio to 1:1 (otherwise my PC2700 showed a 100mhz clock)
    Voltages appear to be within tolerance.
    Can anyone suggest what might be wrong?  My power supply is rather cheap, but again, voltages look OK in the bios, and would that create such consistent problems?  Is it my RAM?  Or do I just have a faulty motherboard or CPU?
    I've been at this for hours and I'm going nuts.  Please help!

    qui3ote it's so hard to say just exactly what your rig is going to take to run properly...some ppl spend hours trying different component configurations trying to make them work together only to find out that they have 1 or even 2 components in the "mix" failing at the same time thus leaving them to scratch their heads in disbelievement...I've been there myself...your best bet is to do as the "pro" builders do...
    Homework, homework, homework...many of us now look around the net for others who have already built systems around a certain motherboard not being the first pioneers to venture into the unknown...saving ourselves countless hours because we've taken the time to talk to the experienced out there as to what will and will not work...
    Some of us who do build a lot of systems for other folx out there take the time to buy different brands of memory, PSU's, CPU's, MB's, etc...and play with different configs in order to find "what works" and then post results in different forums in order to let others know what they've tried and not tried...this usually takes a bit of capital in order to buy what's known as "troubleshooting parts" and can get quite expensive...
    To the occasional home builder: The days of buying and building with no problems is long past...with todays high speed systems, a lot of these home builders only remember the brand names that they used in the past thinking that they can go out and buy a really full featured high end MB, cheap generic or "Value" RAM memory, use the same case (usually 3 to 5 yrs old with a PSU in it that couldn't jump start someone's heart if they were dying, much less start up a power hungry high end gaming rig), as well as other peripherals...
    Then they head on down to the MB mfg's website (if they even have one these days) and (thankfully not in your case) begin to trash and bash the company about how they have a crappy product, blah, blah, blah...
    See where I'm going with this? In any case, as long winded as I've been here, you must now rise above the "occasional home builder" status and approach building with a new outlook as to "how to" and do that homework if you don't want to end up in this boat each and everytime...technology advances and it's up to us humans to advance our thought processes with it...
    I wish you luck in your build here...my biggest advice I can give you atm is to go read the sticky posts at the top of the forum for some excellent tips on Memory, troubleshooting, etc, in order to gain some insight into how to do what you're doing...also, as Raven here points out, that PSU is way out of it's league in being able to supply the power needed for the build you're doing...take a step up into the world of high speed computing and lay down some cash for some higher end components that will leave you tearing out less of your hair and give you some peace of mind...
    Apacer, OCZ, Corsair, Infineon, and, of course, Mushkin are all decent memory lines that have been known to work with these MB's...DO NOT buy cheap "Value" RAM memory for your board, it's likely to only give you more headaches...Mid to high end memory will cost you considerably more money but will save you countless hours of time trying to troubleshoot which to me is more valuable these days...a PSU with AT LEAST the amperage specs that Raven lists in his post, +3.3v-28, +5v-35A, +12V-18A, or even better is in most cases a requirement these days...and yes you're going to spend 60 to 100 dollars US or more to get one that gives you that spec...sales are a good thing to watch for all of this...
    Sorry to go on for so long but I just wanted to give you some insight into the "new age" of computer building! Hope I've enlightened some things for you...if not sorry I rambled on so much *chuckles*
    Good luck and let us know if you need any more help!

  • My imac hangs during starup after installing update

    I installed the new update for OSX lion this morning and after installation the mac rebooted and it hangs on the gray apple screen.

    The system was working fine before the update.
    I got severals errors with the restore disk permissions the first time I ran it. The second time it didn't return any errors. The disk utility din't return any errros.
    After booting in safe mode and hhaving the system hang again I ran the repair disk permission utility again and keep getting the same errors that are being repaired even after running it 5 times is a row.
    The Imac is 3 months old and came with Snow Lzapord installed whitch I upgraded to Lion after startup thru the up-to-date program Apple offered.
    Thanks for all the help seeing this is my first Mac

  • T400 system hangs at POST screen after updating BIOS 7UET82WW

    I have 3 GB memory and Win-7 Ultimate 32 bit OS installed in my T400 system. Recently I had updated the latest BIOS 7UET82WW thru TVSU and ended up with a serious problem.The BIOS update itself was succesfull, but right after reboot my problems started.
    1. The system hangs during startup in POST screen and sometimes boots into OS after a long wait  (20-30 mins)
    2. When I try to press F2 to enter the BIOS, i get a long beep for about 10 seconds and screen becomes white
    3. White screen garbage disappears in few seconds and blinking cursor stays for long time (around 20 -30 mins)
    In net, I have to wait for around 30 mins for the system to boot into OS everytime. If I interupt in between by pressing any key, long beep and white screen garbage appears. I am not able to enter the BIOS as well.
    After logon to the OS, everything seems to be absolutely perfect. But the problem comes back after reboot or hibernate and resume the system.
    Appreciate any solution or feddback from anyone.

    My T500 did this as well after the update.  I went into the bios and loaded all the defaults, rebooted.  Went back into the bios and reset my options (discrete only, turn off some unused features) and the system is working normally and Vista is booting as quickly as it had been before the update (and actually can accomplish a reboot).
    arun_ilango wrote:
    I have 3 GB memory and Win-7 Ultimate 32 bit OS installed in my T400 system. Recently I had updated the latest BIOS 7UET82WW thru TVSU and ended up with a serious problem.The BIOS update itself was succesfull, but right after reboot my problems started.
    1. The system hangs during startup in POST screen and sometimes boots into OS after a long wait  (20-30 mins)
    2. When I try to press F2 to enter the BIOS, i get a long beep for about 10 seconds and screen becomes white
    3. White screen garbage disappears in few seconds and blinking cursor stays for long time (around 20 -30 mins)
    In net, I have to wait for around 30 mins for the system to boot into OS everytime. If I interupt in between by pressing any key, long beep and white screen garbage appears. I am not able to enter the BIOS as well.
    After logon to the OS, everything seems to be absolutely perfect. But the problem comes back after reboot or hibernate and resume the system.
    Appreciate any solution or feddback from anyone.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • PPC G5 system hangs after Leopard Install

    Well I had been monitoring things with the new OSx for awhile before installing. I had upgraded my Macbook Pro (Intel first Gen model) and my newer Intel MacMini with no issues. So after using both of these machines for quite awhile, and with the release of 10.5.2, I decided to upgrade my PPC G5 from Tiger to Leopard.
    Everything seemed to go fine. I installed all possible updates and have used several apps with no problems, such as Adobe PS and Dreamweaver, etc. But now I am starting to notice a serious problem.
    Every time my system either goes into Screensaver mode or sleep, when I try and bring it back it is frozen. All I get is the beachball and the only thing to do is a hard shut down with the power button. My system never did anything like this under Tiger.
    Has anyone experienced a system hang like this?

    Do you have any external drives (especially Maxtor or Maxtor OneTouch Drives)?
    I know on Tiger I had this same problem and it turned out that there was a problem between the Mac's Firewire drivers and Maxtor OneTouch drives. Maxtor had a patch that fixed the problem on Tiger, but I'm not sure if the patch is needed also for Leopard. Not sure if Maxtor drive support is continuing since Seagate bought them.
    I'm currently having a problem on Leopard with hangs (not specifically the same as yours). I'm wondering if it is again a problem with compatibility between Leopard and the Maxtor drives.

  • Software updates: my Mac OS 10.6.6 will not connect to update server and "no system permission to install"

    Requesting an update to 3.6.23 also 7.0.1, so told "unable to update" because I do not have system permission to install. Who is/ are system administrator(s) and what accounts would give me permission to install ?

    You may get faster and better answers if you post in the Acrobat forum, Acrobat. This is the free Reader one.

  • Are FF4.0.12 and Adobe win,2,159,1 compatable? Since I updated both 5 days ago, I cannot use Facebook or play games. Adobe says it is a FF4 problem so I downloaded 3.6.17 but no help. System hangs.

    XP, 128 bit,ff3.6.17 now but no help.
    Since I updated both, in Facebook my system hangs repeatedly
    Only hard reboot and open new session will let me back on. I have been talking to Adobe support for 3 days and got the advice to put FF3.6.17 back on. It is worse when trying to scroll or trying to play a game. Cursor freezes and system hangs. I need some help pls. Which plugin is best when trying to use facebook and games on FF4.12? DOESN'T ANYONE KNOW OF ANY HELP? Just give me the name of a plugin that FF likes and a Web address. I need to be able to use my browser and would like to play some of my games. PLEASE!!!

    Hey, I really need some help. Doesn't anyone know?
    Just tell me a plugin that will work and not hang FF and give me a website. PLEASE.

  • Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

    Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

    As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

  • Installing Solaris 7 - System hangs while determining bus Types

    Hi,
    I am trying to install Solaris 7 on my Compaq Presario. My system hangs immediately after the first screen. It hangs on the screen where it says "Bus Enumeration Determining Bus Type and gathering hardware configuration data. Not sure why it is doing that. Any help would be appreciated
    Regards,
    Ashish.

    My system is not branded It is custom bulit.
    What more information you want write me.
    Thanks for all help
    Amit

Maybe you are looking for