My system IS NOT currently up to date!!

BY THE TIME WE ALL GET THE 2.2 ON THE DI. WE WILL ALL BE SCRAMBLING FOR GINGERBREAD.

3.0 aka gingerbread will more than likely be geared toward newer phones. They say released by the 1st of the year, and well we know how long it takes HTC and Moto to update... that puts this phone at almost a year old. Ancient in the fast paced phone world. I love this little guy but I'm too geeky to sit back and watch the phone community run me over. When gingerbread hits, its upgrade time for this guy!
Like an LTE phone with a duel processor! Rumors rumors rumors for spring!

Similar Messages

  • The system is not reachable, the login data could not be considered

    Hello
    I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
    When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
    The system is not reachable, the login data could not be considered
    I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
    Are there others who have had difficulties when adding a new system?
    Regards
    Yann

    Hi Swapan,
    Thank you for your attention and message.
    I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
    Regards,
    Beiwei 
    Date: Wed, 4 Sep 2013 20:52:41 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                    SAP HANA
        The system is not reachable, the login data could not be considered
        created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
    Hi Beiwei,
    I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server?  Instance number in HANA One is 00.
    If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
    Thanks,
    Swapan
         Reply to this message by replying to this email -or- go to the message on SAP HANA
         Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

  • System is not checking Account assignment data in shopping cart

    Dear Experts,
    We are implementing SRM7 with SP06. We are using extened classic scenario. Recently we have noticed that system is not validating account assignment data at shopping cart level and creating purchase order in SRM, however at the time of PO transmission to backend system it is failing.
    Does any one has faced this issue?If yes help me how to resolve this issue.
    Thanks in advance.
    Umakanth

    Hello Umakanth,
    Could you check if in your settings for Define backend system customizing ( BBP_BACKEND_DEST table), option "realtime backend validation of FI data" is set or not ?
    Regards.
    Laurent.

  • System does not propose the delivery date based on factory calendar

    Hi,
    I am creating a sales order for a delivery date for this sat which is (2/22/09)
    I have maintained 2 separate calendars for
    1) shipping point
    2) for the route
    The route has a transit time of 1 day and the calendar has sat and sunday as non working.
    the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
    The material is available in the warehouse
    Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
    In the schedule line i do see the date as 2/22/09 only.
    The delivery was created with the following dates
    Picking = 2/17/09
    Transportation Planning = 02/18/2009
    Loading =02/18/2009 
    Planned GI= 02/18/2009
    Delivery Date = 02/22/2009
    How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
    Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
    Can any one explain the behaviour of SAP for the delivery date logic

    Dspsac,
    Delivery date can be any date.  For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
    From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route.  You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
    From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
    Calculations are explained in SAP online help
    [Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
    Regards,
    DB49

  • System does not allow to enter data into cube

    Hello
    I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
    Alex

    I guess your cube is not transactional. Try to switch it to transactional

  • System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

    Good day,
    I needed to create a new depreciation area in a live system. The depreciation area would not post to the GL, but would be used for tax purposes in a currency other than the local currency. When creating this area the asset values were translated at the system exchange rate which did not agree with the values of the manually maintained tax register. I proceeded by creating new transaction types that would only post to the new area, one of which was an asset disposal transaction, which would be used for downward adjustment of the APC value. I made my adjustments at the end of the previous financial year, but had to start over and proceeded to delete the depreciation area to allow me to start over.
    After reinstating the depreciation area, my original adjustments were removed, however the assets which APC values needed to be adjusted downward using the disposal transaction, was giving me the AA 478 Posting transaction is not possible (value date not allowed) error.
    I've reviewed the asset postings and there is no record of my original adjustment documents. The problem seems to be that field ANLA-ABGDT (Last Retirement Date), is still indicating the date of my previous adjustments and that this was not updated when the Depreciation Area was deleted and reinstated.
    Again, I do not have any documents which I can access or reverse to update this table. Is there any way to clear this field without reversing the disposal document?
    I'm also looking at implementing SAP note 1618286, to make error message AA478 a warning. I could not implement SAP note 533378 since it only supports component version 46c and we are currently running component verson 605.
    I would appreciate your consideration of my problem.
    Regards
    Marius

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • Firefox 3.6.15 on my Motorola Atrix Desktop system will not connect to cellular data connection.

    I know the data connection is available because the phone browser works. Are there any settings I need to change? It's on the Orange UK network. They have failed to help me (their suggestions don't work)
    It seem the browser can't 'see' the cellular network.

    Have you tried the Easy Link Advisor application that Lynksys offers (free).  It help me set up my network and it's very "User Friendly".  It checks all of your router settings and then will walk you through the process to connect your PC's to the network.  It's a large file, but worth it (for me anyhow) to download, install, and set up my network.  Good luck!
    Sean

  • I would like to disable the phone jack for my mac book pro, it is a disappointment that this feature is not currently accessible . hopefully it will be with the following os x system software up date but until then is there anyone that could help me ?

    I would like to disable the phone jack for my mac book pro,
    it is a disappointment that this feature is not currently accessible .
    Hopefully it will be added with the following os x system software up date.
    until then is there anyone that could help me ? please and thank you ...

    John Galt wrote:
    Have you checked System Preferences > Sound > Output?
    Or are you interested in a phone modem adapter?
    http://www.amazon.com/Apple-MA034Z-External-V-2-Modem/dp/B000C6TLDO/
    ds store wrote:
    It's a Ethernet port, not a phone jack.
    Two good points, in which case I believe the ethernet port can be disabled, (it can on my Pro);
    System Preferences> Network> Ethernet>.........
    Highlight the Ethernet option and click the gear icon at the bottom of the panel. There should be an option to, Make service inactive.....

  • For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

    contact itunes support

  • Ad Hoc Query - While executing - System could not read any data

    Hello Techies,
    When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
    But system is throwing this error -
    System could not read any data
    Message no. AQ_AD_HOC226
    Diagnosis
    There is no data available for the specified selections.
    System response
    The results list in the lower part of the screen still displays the last list to be created.
    Please let me know why does it happening ?
    Thanks
    Jaydeep

    It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
    changed to all

  • "the current system is not the original system" in uccheck

    Hi  Friends,
    I get a message during the unicode conversion. Can u help me how to rectify this error.And also would be grateful if u can given some links regarding this issue and why this error message is raised.
    "the current system is not the original system" in uccheck transaction of unicode conversion.
    thank you
    chandra

    Do you still need help on this?
    Please refer to SAP notes that  can provide some hints
    #997198     UCCHECK: The current system is not the original System
    #963311     UCCHECK reports errors on XSLT sources
    cheers,
    Vincent

  • When we run the FLEET transaction in SQ00, system is not displaying data.

    Hi,
    When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
    Can any one provide the solution...?
    Thanks....
    Thanks & Regards,
    Siva

    Hi,
    When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
    Can any one provide the solution...?
    Thanks....
    Thanks & Regards,
    Siva

  • "Start Deletion of Data in Receiver System" does not start

    I faced the problem tha data deletion in Receiver system is not started in TDTIM synario.
    I started the activity "Start Deletion of Data in Receiver System" , the job "CNV_TDMS_09_RESTART_JOBS" is aborted till the job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over in Receiver System.
    The error message is "No log was created for object CAGTFBS and sub-objekt SLOMBT".
    After The job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over, the job  "CNV_TDMS_09_RESTART_JOBS" is finished normaly but the no deletion job is released.
    I carried out some deletion job by manual operation but other deletion job is not released.
    Does Anyone knows the solution of this problem ?
    Version:TDMS3.0 SP17
    Basis: 700
    Susumu

    Hi Joerg,
    Thank you for your reply.
    > Please check the syslog for any reference to bad defined batch jobs! (all on receiver)
    Syslog is nothing in receiver system.
    > Is there any deletion job that can not be startet manually on the receiver side?
    >  (So normally on top of the list of scheduled deletion jobs.
    I think all deletion job can be started manually.
    Nomally, some deletion job is finished, the job is released next deletion job but no deletion jobs is released.
    In addition, If rerun job "CNV_TDMS_09_RESTART_JOBS" is finished, no deletion jobs is released.
    Best regards,
    Susumu

  • "duplicate member names within data preview are not currently supported"

    When I clicked "Preview Data" it altered "duplicate member names within data preview are not currently supported".
    What's that mean?
    And I can not find anywhere to set "duplicate member names" option :(
    I'm using EAS 11.1.2

    I am very sad to find that "You can change false to true but cannot change true to false".

  • ISE Alarm : Warning : Session directory write failed : [TimesTen][TimesTen 11.2.2.2.0 ODBC Driver][TimesTen]TT0846: Data store connection invalid or not current -- file "dbAPI.c"; lineno 7475; procedure "sb_connLatchAcquire"

    I got this message about 20 times:
    Log Collection Error
    Details :
    Session directory write failed : [TimesTen][TimesTen 11.2.2.2.0 ODBC Driver][TimesTen]TT0846: Data store connection invalid or not current -- file "dbAPI.c"; lineno 7475; procedure "sb_connLatchAcquire"
    Description :
    The ISE M&T collector process is unable to persist the audit logs generated from the Policy Service nodes
    Suggested Actions :
    This will not impact the actual functionality of the Policy Service nodes, Please contact TAC"
    It started after I've added a third DNS Server and did not reboot the whole appliance, but just all services....
    Does anyone know what really might triggered this? After rebooting ISE everything was ok again. But I couldn't find anything in ISE's logs
    KR

    I did a reboot and the problem was solved. I got the message when I tried to stop ISE while all services were just about to get up.
    ISE Version: 1.2.0.899

Maybe you are looking for