My system keeps shutting off unexpectedly after updating it to OS X 10.8.2 (12C60). is there anything that can be done to correct this?

My system keeps shutting off unexpectedly after updating it to OS X 10.8.2 (12C60). is there anything that can be done to correct this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I tried to update my macbook pro, the screen is now frozen. My track pad hasn't been working for awhile and my disc drive is broken. IS there anything that can be done without buying a new laptop. It was bought in 2009

    My track pad has not been working properly for awhile and my disc drive it damaged. I went to update my macbook pro to maveric and it is now frozen and not allowing me to click anything. Is there anything that can be done to fix this without buying a new one? Its from early 2009

    ShelbyMackenzieLynne,
    when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
    When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
    Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
    Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro.

  • I just lost hundreds of songs due to this new software update...I can't find them anywhere in iTunes! Is there ANYTHING that can be done to restore those songs?!?!

    Please help me figure this out......having NO MUSIC is like ripping off a part of me and throwing it away : (   Just devastating.

    If you have iTunes 10.3 or later and you are a resident of the U.S. you can re download past iTunes purchases for free.
    Click Purchased under Quick Links right side of the iTunes Store window.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?

    I have to constantly keep restarting my computer for it to connect to the internet, what can be done to correct this problem?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down?

    Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.

    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
         used to manage backups and to restore backups. Time Machine
         requires a backup drive that is at least twice the capacity of the
         drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
      1. Cool Drives
      2. OWC
      3. WiebeTech
      4. Firewire Direct
      5. California Drives
      6. NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • Help I just hooked up my iPhone to my laptop for the first time and i accidentally chose to have it read it as my ipod so all my pictures were deleted off of it. I had not backed it up before. Is there anything I can do?

    Help I just hooked up my iPhone to my laptop for the first time and i accidentally chose to have it read it as my ipod so all my pictures were deleted off of it. I had not backed it up before. Is there anything I can do? Please tell me my photos aren't gone :[

    Did you by chance have photo stream turned on? If so then they might be there. When you restored your phone it deleted everything and they will be unretreivable from your computer.

  • The on and off sleep button at the top of the phone has stopped working is there anything I can do

    The on/off/sleep button has stopped working, is there anything I can do to get it to work?

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • IPhone 3GS keeps shutting off randomly after OS4 Update

    Right after updating my iPhone 3GS to the OS4, my iPhone randomly shuts off by itself. It will randomly shut down during a call, while downloading an app or typing an e-mail.
    After it shuts off, I usually have to restart it and it will freeze frame at the loading (silver apple icon usually indicating it turning on) with many lines going accross the screen and red and yellow colors on the display. I have to re-shut it down to turn it back on and it doesn't even garantee that it will turn on properly.
    The phone is brand new (I've had it less than 6 months) and it NEVER crashed before. I tried restoring to new, nothing changed. The phone has not been jailbroken either.
    Has anyone been experiencing this as well? Any help will be greatly appreciated.
    Thanks alot,
    Mike

    I am having the same problem, i upgraded my Fiances iPhone two days ago and ever since then we have had nothing but problems. We have restored factory setting a few times, Uninstalled all the itunes software and done all the other bit the websites tell you to but nothing seems to be working. I am desperate, can anyone help.

  • IPHONE 5 shuts off randomly after update

    After I updated to 8.3 last week, my phone started shutting off randomly. It will say I have no battery (not every time) then come back and say I have 42% It's really ******* me off, becuse I will be in the middle of doing mail or writing a text and it shuts off

    The lock button does not turn OFF the iPhone. It will give you a screen with the option to turn OFF the iPhone. Possibly the battery is faulty. Make Genius reservation and take iPhone to Apple store for free battery diagnostic testing and evaluation.

  • After updating my iPhone 3GS to IOS 6.1.3, my iPhone no longer charges by wall or connected to my computer, it doesn't even start itunes, meaning I cannot restore software, anything that can be done without returning the phone?

    I updated the phone, and now, it won't charge through the wall charger, or through connecting to my PC. It doesn't even launch itunes or register it has connected. But the phone still palys music through my docking station. HELP!?

    Hey guy;
    I have the same problem and I do anything you can imagine. If you leave your phone about two or three days and after that plug in it your phone will be power on but your problem doesn't fix. I tried to restore as a new phone, reset all my settings and also I contacted Apple Support but I couldn't fix it. I think that it would be a software issue because it occurred right after iOS 6.1.3 update. It look likes that we have only two choice. First choice is waiting until Apple release next iOS update and check it in our phones, and the other choice is visiting an Apple retail store to diagnostic our phones for hardware issue.

  • After ransomeware on my macbook pro it is really slow, is there anything i can do to improve this?

    After getting ransomware on my macbook pro it is really slow, what can i do to improve this? I cleared it from the screen by restarting and holding shift

    If you held down the shift key at startup then you are now booted into Safe Boot Mode which is always slower than the regular boot.
    Restart the system without holding down the shift key.
    What do you mean by Ransom Ware? did you get a POPup claiming to be from the FBI?

  • I use speeddial addon and it now keeps going off every time I close firefox and I need to reinstall it every time. What can I do to stop this happening? Thanks!

    My homepage now says
    XML Parsing Error: no element found
    Location: chrome://speeddial/content/speeddial.xul
    Line Number 1, Column 1
    every time I open firefox.
    I then have to reinstall speeddial every time I start up. This never used to happen before and I don't think I've changed any settings.

    Been in touch with the author of the product and got the following reply:
    The problem is the SiteAdvisor extension that McAfee installs; go to Tools > Add-ons, in the resulting panel select "Extensions", locate SiteAdvisor, click on it to select, and then click the "Disable" button; Speed Dial will work perfectly after that.
    I already contacted them to attempt to fix the problem, but no reply so far. The problem happens before any Speed Dial code is executed, so I don't think I can fix it on my side.
    Don't have the problem any more, note I had a McAfee update just before the problem started happening.

  • When I updated my graphics driver to version 7.15.10.1666, as suggested in troubleshooting info, it effect the way everything including my task bar and desk top icons were displayed, what can be done to correct this ?

    Everything became smaller. Page displays had wide borders, print was far too small.

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Hello, I have several lotus word pro work file that I need to open on my macbook pro. I do not have a Windows operating system on my macbook but I do have Microsoft Office for Mac on it. Is there anything I can use to convert the file?

    Please advice me as to what I can use to open several Lotus Word Pro files on my Macbook Pro. Thank you.

    you could try giving this a poke and see if it works?
    http://lotus1.software.informer.com/download-lotus-word-pro-viewer-for-mac/

  • My flash update has been stuck at 30% for hours. Is there anything I can do to actually get it to download?

    I have been trying to download flash to watch an exam review and it has been stuck at 30% for hours. I tried restarting the download and it went to 30% and stopped again. I am using a Mac with the most up to date software available for it.

    This morning we resolved a problem that prevented Flash Player installations from completing for some of our Macintosh users.
    If you encountered this problem, please delete any previously downloaded Flash Player installer and either:
    1.)      Download the installer again from https://get.adobe.com/flashplayer
    2.)      Download the stand-alone installer from  http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Maybe you are looking for

  • What is wrong with the report generation toolkit????

    OK.  Now I'm a little frustrated. I started this thread, but then made an ugly workaround until someone tells me the correct solution. So now.... my compiled application can find all the toolkit VIs... but I get error messages telling me that the VIs

  • Configuration issue with SP 2013 and SSRS 2012

    Hi I have installed sql server 2013, SP 2013 and PS 2013 in same server. Getting error when i try to configure Reporting services Integration and path is Central admin -> General application settings --> Reporting services Integration -->  provided u

  • Additional IP Address on CNO - what are the gotchas?

    Hi All, Scenario: two node 2013SP1 DAG in single site with three NICs: MAPI, Replication and Backup Networks. Obviously the backup network is currently disabled for cluster usage. The backup team has requested an administrative access point on the ba

  • Unable to cancel downloads in iTunes Store on iOS7?

    After much searching I haven't found an answer: I have about 20 songs in the iTunes Store trying to download from strange Apple IDs.  My iPhone is prompting me for the password for 2 separate email addresses that are unfamiliar.  To stop the prompts

  • Java Function result.addValue(newValue)?

    Hi All,          Could you tell me what this function does? result.addValue(newValue); Regards, XIer