My System Pref "Airport" forgets my WPA code every time when I restart it!!

A couple of days ago I recieved a wireless modem, a SpeedTouch 716.
It works great and there are no problems. But....in my system pref "NETWORK", subtab "AIRPORT" you can fill in your network (in this case Speedtouch) and your security password (WEP, WPA, WPA2 etc etc).
When I fill in the code (which was delivered with my wireless modem....in this case I used the WPA code)....everything works! It's secured.
But then.....when I close that system pref....and I open it again or restart my computer.....the code is gone....I have to type it in again!!!!!
It only remembers the Speedtouch name.
How can I rexsolve this???? If I close the Keychain-lock in the leftcorner...it makes no difference....the code vanishes eveytime I watch the system pref.
HELP ME!!!!

Connect the iPod to your computer and restore via iTunes. that is what the screen is telling you to do.
iTunes: Backing up, updating, and restoring iOS software

Similar Messages

Why do I get a CATCHA code every time I try to send an e mail-just started recently

why do I get a CATCHA code every time I try to send an e mail on safari-just started recently

It's likely that AT$T is recognizing that version of Safari as not compliant with their anti-spam or security requirements for their webmail application. Assuming you are running OS X "Snow Leopard" that Safari version is the latest one. That's annoying because I am not aware of any noteworthy security improvements in subsequent Safari releases, and AT$T ought not to treat it any differently.
Your alternatives are to upgrade your Mac's operating system, which has certain minimum hardware requirements, or simply use your Mac's Mail application. Or, just use Firefox when you want to use webmail. Otherwise you'll have to put up with their silly Captcha annoyances.
To add your AT$T email account to Mail, start here: http://www.apple.com/support/macosx/mailassistant/
To upgrade OS X start here: http://www.apple.com/osx/how-to-upgrade/

Imac loose airport network setting like password every time i boot...

Hi everybody,
maybe someone can help me. I use a imacg5. I connect via airport extreme to an avm router. I use WPA. Every time i boot my imac, there is no connection to the router. I have to go to internet connection, choose a "other" network, type in a new name for the network, switch to WPA and enter my password. After that everything is fine and works until i rebbot the machine. After that, the network is gone and i have to make one again. This only means, i have to do that under the airport icon at the top of os. Under preferences, network there is still the connection with correct password, but the imac will not use it. Also there is no possibility to save my password. My qestion is: how is it possible to save my network, encryption and password. Liek i told, under preferences everything is fine, the connection stays there after reboot. Only the internet connection will lost all settings. Maybe anyone can help, i´am a new mac user too, owning my imac only for 3 months (cannot believe, i worked so much years with a pc)...
Thanks a lot

this was a user problem, my adminstrator account was gone

Flash the system message every time when user login

Hi all,
My requirment is to diaplay the system message when user login for the maintenance purpose, In SM02 i created a message but it is not working for evary time login, It is displaying only one time, suppose i logoff and again loging message is displaying.
Please tell me how to display system message evary time when user login.
Thanks in Advance,
Thanks&Regards
RP

Hi,
To display system message every time when user login : use the
Enhancement SUSR0001
Short text User exit after logon to SAP System
You also get the Example Code here.
And the Documentation is :
Every dialog user passes through this function module after logon. Yo
can use this to execute individual customer checks here and send
messages to the user.
Do not log off the user and also try to avoid too many dialog boxes.
Regds
Suman

HT5934 How can I disable the lock screen option. I do not want to punch in a multi-digit security code every time I need to use the phone

How can I disable the lock screen option? I do not want to punch in a multi-digit security code every time I need to use the phone.

System Preferences - Security & Privacy - unselect the box called Disable automatic login

Why do system preferences revert back to default every time computer is restarted

Cannot keep changes to System preferences. All revert back to default every time computer is restarted.
Also, all extensions, e.g. adblock, reinstall every time computer is restarted.
<Personal information edited by Host>

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Need to enter WPA key every time i re-connect?

I have a small network of one wired PC, one wireless PC and a wireless laptop. I messed something up while trying to add our new itouch to the network and now, the laptop is asking for the WPA key every time it re-connects. As of right now, the wired PC is also the only one getting on the internet. We are using the WRT54G v.4, running windows XP on all three computers and i'm about to throw them all out the window. Please help. By the way, the laptop has a different IP address then the other computers...is this a problem too? Thanks in advance.

All the computers on your network should have different IP addresses, but they should all be on the same subnet 192.168.1.x . If your computer fails to connect, it may show a 169.254.xxx.xxx address. This address simply means you failed to connect. It comes from Windows, not the router.
First, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Also, in the non-working computers, temporarily turn off the software firewall, including Windows Firewall, and see if that helps you make a connection.
To fix the recurrent WPA key entry problem:
In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will clear any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to your router. If you still have trouble, make sure your computer's software firewall is off.
If the above does not fix your problem, download and install the latest driver for your wireless card.
Also, please note that WPA = "WPA with TKIP", and WPA2 = "WPA with AES".
If you are using WPA2, then note that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=917021 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
If you need more help, please state the computer software firewall that you are using.

Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

That's what I was suspecting they were asking , but wanted to make sure.

I have this problem every time when I open my computer; Photos for the iCloud account cannot be accessed. Review your account information in System Preferences.

processor 2.5 Ghz intel core i5
memory 4 GB 1600 Mhz DDR3
Graphics Intel HD graphics 4000 512 MB
Serial Number C1*******TY3
software OS X 10.8.5 (12F45)
my problem is, every time when I open my computer I get this note, Photo stream and it says I need to check something? And I also cannot share videos from youtube… there is no option for me to share on FB..
<Personal Information Edited by Host>

For Youtube and Facebook.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - Mavericks
Safe Mode - About
For Photo Stream, try System Preferences/iCloud - un-check Photos and then re-check.

HT203208 Why do I have to keep putting in my security code every time I buy?

I have to put in my credit card's security code every time I buy something from iTunes. I seem to be the only person that has to do this because I've asked friends and they don't have to do this. Is there a setting I need to change in my iTunes profile?
Thanks in advance.

No Problem Demo.. They said to keep trying they would get back to me later this week, she had to talk to the tech people that has a longer history than what she has availabe.. We also ran the diagnostics on the ipad and all is fine with the firmware and the battery.
One thing that leads me to believe i am locked out of the servers, when i do a restore through itunes I get that little lock in the window just above where it says the servers are unavailable.
I have also been intouch with verizon and they said they would run some diagnostics on there end and would get back to me, that was 2 weeks ago.
Thats what I like about apple they're good on the follow up.

I have to type my security code every time I turn on my ipad with ios6.0. I don' have to this with ios5.1. How can I solve this problem?

I have two problems with IOS 6.0.
1. I have to type my security code every time I turn on my ipad with ios6.0. I don' have to to his with ios5.1. How can I solve this problem?
2. I can not send email via Yahoo as usual, Only Safari allow me to it.
Accordingly, I am writting here to ask for to solve those problems.
Thanks in advance.

* Websites remembering you and automatically log you in is stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also http://kb.mozillazine.org/Cookies

What is "launchproxyls"? It runs every time when I start the system.

I am using 10.6.6， Recently I noticed the computer running even I did not using any program. Then I found the process "launchproxyls", when I close this process, computer return quiet again. But every time when I start the system, it runs, and I have to close it manually.
Could anybody please help me?

Thank you for the response.
I found it was SPSS using inetd.
So I made two changes, but it the launchproxyls does still run the same:
First I uninstalled the SPSS, but no effects.
Then I reinstalled the OS(10.5), the launchproxyls did not appear. But after I update to 10.6.6, it appeared again, I still have to terminate it manually.
Is there any relation between 1.6.6 and launchproxyls?
F.Z.

TS1398 My new iPad keeps forgetting my Internet password every time it is switched off or goes on flight mode

My new iPad keeps forgetting my Internet password every time it is switched off or goes on flight mode. Have tried resetting the network setting as it suggest on the support page. The Internet works fine with my windows PC and my son's iPad 2. Any advice?

Have you tried powering off and then back on your router?
Does it only happen with your router? If so that would tend to indicate a router problem.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
anyone have any idea

Hi
Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
Daryl

Need help with control system that reduces a flat output signal every time a certain input exceeds given value

I'm having difficulty setting up a closed loop control system that reduces one of my voltage outputs (connected to a high voltage system) by 30% every time a measured voltage exceeds a certain threshold value. I'm using a USB 6229 DAQ. I've been trying to create a waveform that looks like a DC signal, but the only waveforms that I can seem to manipulate while my VI is running are the stock waveform types. Also, I've tried to use a formula node or conditional structure to update the output value every time the measured voltage exceeds a given value, but everything I do reinitializes the output value every time it runs or won't store the previous signal value. I'm using LabVIEW 8.6 and don't have the PID or similar express VI's. I've attached the mess I've got working right now. Can anyone help? I'm really stuck!
Thanks!
Attachments:
HiV step down.vi ‏40 KB
output control.vi ‏100 KB

I'm sorry it's such a mess; I'm still pretty new at this. These are both little driver programs for a larger overall control program.
Output control is meant to send a flat signal to the DAQ whose value can be manipulated while the VI is running. I have the second activated segment merely to check the values being output. I didn't realize I attached a version with a meaningless control...I had a control where the user would put in the stating voltage (the high voltage source has a 1V-100V setting for external control). I've attached this slightly different but equally dysfunctional version. Ideally, I would have liked something like the analog signal generator vi to come with an input wiring for offset on the DC signal. Most of the code was diabled because it is copied from an example; it is largely rubbish. I initially used the DAQ Assistant, but when things weren't working out I switched to putting in each step manually to try to troubleshoot.
As far as HiV step down is concerned, I've tried something different with a nested case structure (if that's the right terminology?), and I've attached that file. I think this problem has been solved, but you never know!
Attachments:
output control slightly different.vi ‏100 KB
HiV step down w case structures.vi ‏44 KB

My System Pref "Airport" forgets my WPA code every time when I restart it!!

Similar Messages

Maybe you are looking for