My system  shows rainbow while typing

My system  shows rainbow while typing and is slow while opening and app. I took to apple authorized repair center and they couldn't find anything other than slightly more heating than usual. Help!

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If you have done this like I describe above and the problem continues I suggest you contact Apple Support or make an appointment at an Apple Store and have your iPad examined by a technician.

Similar Messages

  • Numbers for ipad - forms not showing text while typing

    Is anyone else having this issue: When I try to enter data into a form only the first field shows what I am typing. As soon as I go to the next field you cannot see what is being typed into the field. The field is working because I can enter data and when the next field is selected you can see the data that was entered but you cannot see it while you are entering the data. This was working fine last week now it will not work at all. Tried rebooting the iPad but still not working.

    OK. So I just got off the phone with Apple Support. They have known about the issue for a couple of days and are working on a fix! Hopefully we will see an update to Numbers for iOS soon!

  • I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y=   this is how when we type "qwerty|" can anyone help me pls?

    I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y=   this is how when we type "qwerty|" can anyone help me pls?

    You could just try changing your Input Sources under System Preferences>Language & Text:
    But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
    Good luck,
    Clinton

  • The System shows an Error while creating an Inhouse Repair Order

    Hi Experts,
    I am facing a problem related to An Inhouse repair Order. when i create an order the system shows me two errors
    1. An error occurred in system during account assignment     
    2. An error has occured in the system while copying the document     
    What could be the possible problem with the order....
    any help will be highly appreciated.....
    Thanks in Advance.....

    Hi vickee.sehgal ,
    Can u please provide inhouse repair configuration settings in crm 7.0. I have requirement on this,i am not able to find relevant best practices.
    Thanks & Regards
    kishore kumar

  • While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    I would imagine your iPhone was hacked to make it work on your local carrier.
    Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
    entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply

  • While doing MIGO transaction system showing error: Check table169P the entr

    Hi experts,
    while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
    pls do needful.
    Thanks&Regards
    sreenivas.p

    Hi,
    Please specify Whether you are doing Blocking of Invoices or what?
    As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding  company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
    Please check....
    For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
    Regards,
    Ninad Kshirsagar

  • System wide jerky scrolling and delay while typing and selecting text

    Hi,
    I'm new to Mac (first laptop) and I'm noticing just now that the system response feels very low. There's a significant delay when showing characters after typing as well as selecting text, and jerkiness when scrolling anything, from Finder window contents to Safari web pages.
    I take care of not installing suspicious software, I use a limited account for daily taks and haven't installed anything lately. Processor usage is as low as ever. Plenty of memory is free (4GB installed) and free disk space is enough (66 GB).
    What is happening? Not even Windows behaved like this!
    Please help!!!!

    I had installed 10.5.8 and it's kind of iffy with file permissions...
    The system-wide jerkiness went away with a reboot, but the Safari jerkiness I could attribute to specially heavy surfing I never did before on that day.
    I'm accustomed to my Mac working speedy all the time and because of that I can be unforgiving, and it's wrong. I would never complain of jerkiness on my XP PC when opening 30+ browser instances and 100+ tabs in total because I know XP can't handle it, but that was the kind of thing I threw at Safari. And the experienced jerkiness wasn't even on all pages, just a few.

  • Check spelling while typing feature (in iCal) disables itself continuously

    Hi there,
    We use the iCal regularly to do write-ups for each appointment everyday. The past month or so I've noticed that everyday that I go into iCal, I have to re-check off the "Check spelling while typing" preference. Every day, I check it and then for some reason, it goes back to "correct spelling automatically" by some sort of possible default. We've never had that problem before.
    Any ideas on a fix for this?
    Thanks!
    ~Natalie

    ~Natalie,
    If you are referring to the Calendar>Edit>"Show Spelling and Grammar" pane, you may also want to check your System Preferences...>Keyboard>Text>"Correct spelling automatically" setting.

  • Disable the Check Spelling While Typing feature in Stickies permanently

    hello. Each time I start up Stickies, I have to manually disable the Check Spelling While Typing feature anew. Stickies don't offer a preferences panel. Would there be any other way to permanently disable this?
    thanks

    ~Natalie,
    If you are referring to the Calendar>Edit>"Show Spelling and Grammar" pane, you may also want to check your System Preferences...>Keyboard>Text>"Correct spelling automatically" setting.

  • In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending

    In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending at MASOP vendor. After reconciliation of challan, the Qty sent=250 , Qty received= 113. system must show Qty pending = 137. But when we check in J1IF12, Qty sent=250 and Qty received=113. Why J1IFR report is showing incorrect output.
    I am facing this problem after Ehp7 upgrade in SAP ECC 6.0 version.
    Thanks & Regards,
    Neeraj.

    Are you using the same number ranges for different series group. This can cause inconsistency. Also check table J_1IGRXSUB whether right material documents are attached to your Challan.
    Also refer to these notes which is only applicable for EHP6.
    1753000 - Wrong output displayed for status in report selection-
    J1IFR
    and
    1674607 - Duplicate entries while displaying Annexure IV in
    J1IFR
    Regards
    Binoy

  • While typing on Mac Air the screen went blank, was seen only cell for password. i closed the devise adn after openning it if flashed and now its working. Does it need a tecnical repairing or its fine?

    While typing on my macbooc air suddenly the screen ent almost blank, pale. After closing the device and openning it again it flashed and started working normally. Is it dangerous or its fine?

    Hello,
    According to your user agent, you are on Firefox 32. If you planned to use Firefox 31 ESR, you can grab a copy here:
    * https://www.mozilla.org/en-US/firefox/organizations/
    Out of curiosity, when it turns transparent, is there a "(Not Responding)" appended to the end of the window title? If you don't have the Window title being shown, it might show up if you have window titles shown on your taskbar, or in the task manager (right click on your taskbar and select "Start Task Manager"). If you do see a Not Responding, it could be a slow script on one of the pages you are viewing.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Keyboard: Duplicate keys while typing

    Hi evrbdy,
    I have a PB G4 1.5 with 2GB upgraded memory. I have a problem with the keyboard, eventought is not major, is annoying.
    While using the keyboard, sometimes while typing, the keys entered get duplicated, even that the keeyboard stroke was a single one. I.E. the keyboard word I just wrote, but in the application it comess as a double e. it happens with most of the keys and is an erratic behavior, sometimes happens sometimes not, ddepending on the computer mood.
    Any comment on this will be highly appreciated, since I couldn´t find any help like this on the net.
    Regardds.
    Sachabaca

    I am still relatively new to the Mac world- just got my Powerbook in August. I had high hopes for Apple's service when it came to getting my keyboard replaced due to this 9 key problem.
    I've had SEVERAL, make that TONS of problems with just about every other computer company getting service so when I called APple and spoke to a guy who actually spoke english as a first language, I knew this was going to go well.
    5 minutes into the conversation (thats 5, NOT 55) the service call was set up and I was all set and off the phone.
    THEN, I sent the computer out to Apple on Tuesday thinking that I'd get it back in a week or so and two days later its back at my door, all healed!
    Needless to say I am impressed. I have a renewed appreciation for my computer and the company that makes it.
    So long as Apple doesn't screw with their service and support system, I will not be switching back.

  • 'Check Spelling While Typing' does not work for any applications

    Earlier I had a problem with misspelled words underlined but when I right-click it does not offer spelling suggestions.
    Now, none of my applications underline misspelled words. Even if I select the option to "Check Spelling While Typing" it does not change anything. This applies to all applications (Mail, TextEdit, EverNote, Firefox, etc).

    Update: Inexplicably the underline for misspelled words now works but now when I right-click for corrections it shows 'No Guesses Found' for any word.

  • Deselecting cells while typing

    I've been experiencing problems while typing in numbers on my mac, my iPhone and iPad.
    It just keep "deselecting" the cell, I'm not sure how to explain it properly,
    the scenario would pretty much like while inserting values into the cell, your kid or pet is playing with your mouse.
    I need to try multiple times to be able to type in the correct value.
    Does anyone experience the same problem I did?
    Originally I thought it's my phone, but then it happens on my iPad, my Mac...
    Please help!
    Numbers: 3.2
    Mac: OSX 10.9.4
    iOS: 7.1.2

    Check you system preferences with regard to the track pad.  :
    See if tap to click is checked.

  • Why there is on the dial pad letters?while there is no names appears while typing numbers or (letters) to dial .. Thanks !

    Why there is on the dial pad letters?while there is no names appears while typing numbers or (letters) to dial .. Thanks !

    No need to. The system will automatically do so...been like this for years.

Maybe you are looking for

  • Can't select placeholder image in template

    Hello there, perhaps I'm too stupid and the solution is such easy. But today I wanted to use the template "You're invisited" to style an invitation for a friends birthday party. In iWork '06, I could select the images on the left side on page 1 and 2

  • Severe Samba performance decrease after u6 - u7 upgrade

    I just upgraded my Solaris 10 x86 system from u6 (kernel 138889-08) to u7 using LiveUpgrade. I have samba sharing some ZFS filesystems, and the first thing I noticed after the upgrade was a severe performance decrease in reading files via smb. For ex

  • Oblix_OBWebGate_AuthnAndAuthz: ..- Unable to read log configuration file.

    Hi All, I have a painful problem with Oracle 10g Webgate. I am using Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted Apache resource. I have some problem in Custom Authentication plugin. which is not still resolve(https://forums.o

  • SMS/SCCM & Batch Files - Important notes on running .BAT files from UNC in SMS/SCCM

    http://www.myitforum.com/articles/42/view.asp?id=1​2036 Cheers, David Goldberg National Instruments Software R&D

  • OAS - EJB connectivity

    Hi, I've been trying to connect my EJBs with OAS(4.0.8 and 4.0.8.1) on NT. I could not get it connected. Before we continue to spend more time to explore, can somebody tell me if he/she ever made it work successful? Raghu, I notice that you've been g