My t61 - no power after changing the power jack

Hello guys,
So the long story short , the power jack on my t61 wasn't working.I bought the new one , changed it today , I am pluging it -no power at all.I dont think its the charger as up until the end it was working , its here to say i havent started the laptop for about 3 months .It was a pain to start it before , i had to twist the power jack in every possible was just to make it power on.So my concern right now is whether the motherboard is dead or not.
Please anything you have like a clue will be more that appritiated!
Solved!
Go to Solution.

There isn't much required to get the power light to come on. It is possible you shorted something out. IT is possible something isn't plugged in all the way. Even if the CPU isn't in or the memory isn't seated, you would get the power light. Is it possible that all the twisting before broke the wire between the ac adapter and the machine? Can you get another power supply to try?

Similar Messages

  • My laptop keyboard is having problems. I took it if to change my bottom case it worked fine prior and then after just the power key worked. I cleaned everything nothing is bent in the cable. now my power key is not working

    Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??

    Back up all data.
    Triple-click anywhere in the line below to select it:
    pmset -g assertions
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • Computer shuts down after unplugging the power cord

    My computer is showing a Plugged in, not charging message, but it is at 88%.  When I unplug the charger from the computer to work somewhere else, the computer totally shuts down and will not power up unless the power charger is plugged in.  I tried taking the battery out and leaving the cord connected and the computer started fine.  How do I get the computer to stop shutting down after unplugging?  Any help is greatly appreciated.

    Sounds like battery #2 has a short. When the system detects a critically low battery, it is likely to devote all power to battery charge until the batery reaches 5% or so. Try each battery seperately. If no power at any time, remove the battery, disconnect the AC adapter. Press the power switch for about ten seconds. Then connect the AC adapter, let it boot, then install the battery and check the charging status. This resets the power manager. I think one battery id bad, but you will need to test them one at a time. Good luck.

  • My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

  • My vintage Power Mac will not power on.  The power on button lights up, but dims after releasing the button.  What is the problem?

    My vintage Power Mac will not power on.  The power on button glows bright when pressed, but dims to off after releasing the button.  What is the problem?

    The battery is the PRAM battery:
    Your Mac stores certain settings in a special memory area even if it is turned off (unless there is a battery issue as described below).  On Intel-based Macs, this is stored in memory known as NVRAM; on PowerPC-based Macs, this is stored in memory known as PRAM. Information stored in NVRAM or PRAM may include:
    Speaker volume
    Screen resolution
    Startup disk selection
    You may need to reset the NVRAM or PRAM if you experience issues related to these functions. For example, if your Mac starts up from a startup disk other than the one you've specified in Startup Disk preferences, or if a "question mark" icon appears briefly when your Mac starts up, resetting NVRAM or PRAM may help.
    http://support.apple.com/kb/HT1895#
    Replace the battery and reset the PRAM.
    Resetting your Mac's PRAM and NVRAM - Support - Apple
    Can I purchase a replacement battery at Walmart?
    Likely not.
    Order one at OWC for the best price ($20+ at Radio Shack):
    NewerTech 3.6VPRAM 3.6v Lithium 1/2 AA PRAM... in stock at OWC
    But have not sure what a PSU is or how to test it.
    PSU- Power Supply Unit.
    Then the steps that I deswcribed may be a bit advanced for you?
    The PSU is the gray box at the top rear of the interior, the box to which the power cord is attached and has the fan blowing hot air out.

  • PDF in Word after changing the old PC

    How can I use the Adobe ExportPDF after changing the crashed and old PC

    Hi Zis,
    I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
    Please let us know if you need additional assistance.
    Best,
    Sara

  • No effect after changing the message mapping

    Hi everybody,
    i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
    Should it be a cache problem? Where can i delete the caches?
    regards,
    Sid

    Hi,
    I guess there can be two things.
    before going to the tcode sxi_cache...
    Please go to the IR, Click Environment, Cache Notification and then select author as your id.
    Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
    Now press refresh.
    I guess this will resolve your problem

  • ORA-12545 error after changing the host name as IP address in Tnsnames.ora

    HI,
    I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

    12545, 00000, "Connect failed because target host or object does not exist"
    // *Cause: The address specified is not valid, or the program being
    // connected to does not exist.
    // *Action: Ensure the ADDRESS parameters have been entered correctly; the
    // most likely incorrect parameter is the node name. Ensure that the
    // executable for the server exists (perhaps "oracle" is missing.)
    // If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
    // host name to a numeric IP address and try again.
    Seems you specified wrong IP address.

  • Poor Printing quality after changing the catridges

    After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
    regards,

    Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

  • EXIT after changing the document status to Parked and complete

    Hi,
    I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
    I will really appreciate your help.
    Kuntal

    Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
    Activity History.
    The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
    This error message does not explain much. I followed all the steps in document# 397364.1
    Don't know why it should end in error and how it can be fixed?
    Any more ideas?
    Thanks

  • Interface getting failed after changing the Business system to that service

    Hello All,
    Our Env... is XI 3.0 and this is related to produciton env.
    Based on our client requirment to change the business system from client 871 to 100 for  one of the R3 system which is reciever type(rfc).
    After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in  the system.
    The steps which I have followed to change the Business system.
    1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
    2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
    3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
    Then i saved the changes and after that i have activated that interface.
    After that when i logged into CC monitoring and viewed that service channels and see the following errors:
    Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
    Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
    Awaiting for your reply.
    Best Regards
    Rakesh Reddy

    Hello Nisar
    Thanks for the update,
    Let me say few points  about this particular problem:
    1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
    And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
    2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
    3>As mentioned by you , I have checked all the points mentioned
        i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
       ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
       iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
    I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
    It says that:
    RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
    Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
    If any information required , I can provide that.
    Best Regards
    Rakesh Reddy

  • Will SQL Server work after changing the Machine's SID

    I have a base VM which has SQL server and a SharePoint Farm, After changing the SID of the Machine Will SQL Server and SharePoint Work ?

    Hello,
    Changing SIDs may cause some Windows functions to fail as mentioned on the following post:
    http://blogs.technet.com/b/markrussinovich/archive/2009/11/03/3291024.aspx
    Tools like SysPrep that change SIDs are not supported on all SQL Server features:
    http://blogs.msdn.com/b/kenkilty/archive/2013/02/22/sql-server-2012-sp1-cu2-sysprep-gotcha.aspx
    http://blogs.msdn.com/b/petersad/archive/2009/12/17/sql-server-2008-r2-sysprep-step-by-step.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • After changing the context path, felix console, I can not checkout content via vlt.

    Hi everyone,
    I have the following issue. After changing the context path, via felix console, I can not checkout the content via vlt. Before that, I could checkout without any problems.
    I am using CQ5.5, CRX2.3, context path: /Test
    That is what I am trying:
    vlt -v --credentials admin:admin co http://localhost:23310/Test/server/crx.default
    Connecting via JCR remoting to http://localhost:23310/Test/server
    [WARN ] Authentication required to access repository descriptors
    [ERROR] checkout: com.day.jcr.vault.vlt.VltException: Unable to mount filesystem
    caused by: javax.jcr.ItemNotFoundException: Not Found
    caused by: org.apache.jackrabbit.webdav.DavException: Not Found
    Other versions I tried:
    vlt -v --credentials admin:admin co http://localhost:23310/crx
    vlt --credentials admin:admin co http://localhost:23310/Test/server
    vlt --credentials admin:admin co http://localhost:23310/Test
    vlt --credentials admin:admin co http://localhost:23310/Test/crx
    To verify if I could connect to the instance properly I started CRXDE
    and try to connect to "http://localhost:23310/Test"
    After click the ok button I got that error:
    No file system is defined for scheme: jcr
    Part of the .log file (.crxde):
    eclipse.buildId=unknown
    java.version=1.6.0_37
    java.vendor=Apple Inc.
    BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=de_DE
    Framework arguments:  -keyring /Users/peterwimsey/.eclipse_keyring -showlocation
    Command-line arguments:  -os macosx -ws cocoa -arch x86_64 -keyring /Users/peterwimsey/.eclipse_keyr
    ing -showlocation
    !ENTRY org.eclipse.core.resources 2 10035 2012-11-25 19:01:19.268
    !MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to
    recover changes.
    !ENTRY org.eclipse.osgi 4 0 2012-11-25 19:04:14.363
    !MESSAGE Application error
    !STACK 1
    java.lang.reflect.InvocationTargetException
            at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121)
            at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62)
            at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
            at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau
    ncher.java:110)
            at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav
    a:79)
            at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
            at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
            at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
            at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
            at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55)
            at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50)
            at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65)
            at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107)
            at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350)
            at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100)
            at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6)
    Any tips or hints are welcome.
    In the case you need more information, just leave a note.
    Thanks in advance for your help.
    Best regards,
    Peter

    The VLT works fine with the above URL change but How to fix "CRXDE" Initialization error if a context path is defined?
    I have a context path defined /Test and when I am trying to login to CRXDE with URL as http://localhost:4502/Test, I am getting below Initialization Error.
    Any workaround as Which URL should work while logging to repository (with context path) using CRXDE 1.0.1
    eclipse.buildId=unknown java.version=1.6.0_06 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments:  -os win32 -ws win32 -arch x86 !ENTRY org.eclipse.osgi 4 0 2013-04-25 17:50:23.802 !MESSAGE Application error !STACK 1 java.lang.reflect.InvocationTargetException at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121) at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
    Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
    at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55) at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107) at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350) at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100) at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6) at com.day.cq.ide.init.SetupWorkspaceOperation.execute(SetupWorkspaceOperation.java:119) at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:106) at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800) at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:118) ... 13 more Root exception:
    Thanks.

Maybe you are looking for