My Tags that started with a number are gone! I've tagged links with the tag: "3D". they are not in my tags!

I have tagged quite a few links with "3D" : examples of pages that used 3D in their webdesign, interesting 3D software,3D tutorials... They are all gone!
I have found, for example, the tag "+eclectic" . So extra characters ARE used in tagging.But nothing that has been tagged with a number is in my bookmarks :-(
Maybe Mozilla should warn users not to tag using a number?
Thanks a lot for any help!

As best as I can tell, 20ms is around the "sweet spot". I've tried it at 10ms and almost immediately started getting faults. At 20ms it's a bit intermittent- sometimes it'll run fine for several minutes and then get a fault, sometimes not. I've tried running at 30ms as well but it's hard to prove a fault would *never* happen.
Part of my problem is that I don't understand what all needs to happen during this timeframe. Is this an internal loop that's running too slowly, or is my Axis interface code running too slow? Would having too many front panel controls/indicators slow down FPGA access? Should I be using some type of buffer to send configuration data, and keep front panel controls to a minimum?
I understand that front panel controls can use up memory in an FPGA, but I've got enough space, so I assumed that would be OK, but I'm certainly not sure about any of this as it's all quite new to me.
I did go ahead and start a service request, but I noticed it was possibly a 2-day turnaround. I'm hoping someone can give me a hand on the forums as that's both quicker and more easily accessible for future users with similar problems.
Edit: I just did a run at 30 ms, and got the fault about 6 minutes into the run. I've got the RT VI running with the front panel on my computer, along with the Distributed System Manager, and am working on other things while it runs. Not sure how repeatable this will be but take it as it is.

Similar Messages

HELP! iPod sorting artists that start with "The" under "T"

OK, so I synced my iPod classic last night, and now ALL artists that start with "The" are listed alphabetically under "T". Prior to last sync, it had never done this. I didn't change any setting, the only reason for the sync was to add a podcast that had downloaded. It also appears that the sorting feature is no longer ignoring punctuation, because "Weird Al" Yankovic is now alphabetically first, as opposed to under "W" where he was previously. What happened, and how do I get it back to normal?
Thanks

Hi, welcome to Apple Discussions.
It should sort itself out if you reset your iPod, otherwise you will need to do a complete restore. If you are not familiar with those terms take at look at http://www.apple.com/support/ipod/five_rs/classic/
tt2

Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up

Problem summary: Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up.
In a different help forum someone told me that the autocomplete (autofill) feature of my browser is enabled. Seems that it is set to save autocomplete data for forms and/or usernames/passwords. I need help with the steps necessary to disable this feature.

Problem summary: Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up.
In a different help forum someone told me that the autocomplete (autofill) feature of my browser is enabled. Seems that it is set to save autocomplete data for forms and/or usernames/passwords. I need help with the steps necessary to disable this feature.

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

Why can I only see artists that start with the letter "A"?

On one iPhone, iTunes Match is fine (except that navigation through the iPod app is PAINFULLY slow!!!)
On the other iPhone, iTunes Match only shows artists whose names start with the letter A. I've gone through playlist mode and downloaded other stuff, but they don't show up, regardless of whether "Show All Music" is on or off.
Help!
Any speed tips would be appreciated, too!
mdc

Noel Carboni wrote:
Now I need to figure out where to turn that off by default.
OK, now I see the Fill and Stroke options - ONLY VISIBLE IN THE OPTIONS BAR WHEN TOOL MODE Shape IS SELECTED - that affect the operation of the [Shape] button.
Personally, I really LIKE the concept of always making a Path, then doing with it what I want (e.g., make a Shape with the button).
I'm not sure what I'd suggest about making the Fill and Stroke options available, but clearly the method of haivng them only show when making Shapes, and not when using the [Shape] button is a stumbling block even for folks who are familiar with the product.
I would probably turn off the Stroke feature by default, though, then let people discover it.
-Noel

Itunes media folders for musical groups that Start with "The"

I am using Itunes 10.7 and have selected the option of copying files to Itunes media folder when adding to library. When I add a musician group that sometimes starts with "The" and other times don't start with "the" (eg Bee Gees or The Bee Gees) these two names are correctly sorted on the Itunes list - "The Bee Gees" sorts next to "Bee Gees".
When I look at the folders in Itunes/Itunes Media/Music I get one folder for "Bee Gees" and a second folder for "The Bee Gees. I have just started loading music into Itunes and already have 47 sets of folders where the groups are in two different folders - musical group name starting with "the" and another that does not start with the word "the".
Suggestions?
Thanks

As Ed says, that's the way it works. For any similar group decide which of the two forms you think is correct and then use it consistently in Artist, Album Artist, and Composer when relevant. While not the ultimate arbiter of fact Wikipedia suggests that Bee Gees is the correct form in this example.
See my article on Grouping tracks into albums for more.
tt2

I need a USB Headset with Mic to use for Webinar's and Go To Meeting sessions. There looks to be very few options that work with the Mac as they seem to be designed for Windows. Any suggestions on equipment?

I am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
Bob

I am looking for a binaural USB headset with microphone to use during Go To Meeting sessions and Webinar's. Seems to be little that works with the iMac and most of the web searches have not been encouraging. Any suggestions on units that work. I have a new iMac running Snow Leopard 10.6.8.
Bob

Horrible problem that started with the 10.5.3 update.

First I'd like to say Hi, because I'm new here.
Here's my problem. I installed the 10.5.3 update about a week ago, the computer wouldn't make it past the gray screen with the Apple and gear on it. After reading through countless discussions on here, I realized my only option was an archive and reinstall. Which I did. I backed up all my important files, reformatted the volume and everything was fine.
The only problem I noticed after the format was the fact that there were weird files appearing in my trash bin, which I read about, and I thought was pretty much nothing of importance. I then proceeded to update to 10.5.3.
So a week goes by, I try waking up my computer from sleep, and it won't. After about 10 minutes I do a hard restart, and I get a folder with a question mark.
Hardware test turned out with no errors.
So I do a repair on the disc using my Leopard install disc, tons of errors pop up, the hard drive is showing up as unmountable, it can't repair any of the problems. At this point I think it's best to format my entire drive, Windows Partition and all. The only problem is, there's one set of important files left on my computer. I want to get them off. A TDM start only shows my Windows partition on the other computer. And I can't mount the disc.
Am I at a dead end? I mean if I HAVE to lose the files, it's not going to be too much of a deal, however I want to know now if there is some chance I can possibly salvage them.
The partition shows up on restarts, when I choose to start it, I get the "Gray Screen of Death" after about 30 seconds.
Also, is there any fix to this problem?
Thank you in advance.

Well, I am not a specialist, but, first, archive and install does not mean you have to reformat the drive. It just puts aside the last system.
Now, if you have or borrow a second Mac, you could link them with a Firewire cable and start your scrambled Mac in slave mode, to try to access the drive from the other system (either from the Finder or any kind of repair utilitiy, then with a software of backup/restore or directly from the Finder) and then repair it just enough to get the files back. Or if you have a external drive, try to install any system there and launch from there, then do the same as above.
At the end of the day, if there is no way to access the internal hard drive, then yes, cry and reformat the whole...
Patrick

My mac book air keeps starting with the same programs and does not save changes made such as dock preferences, my mac book air keeps starting with the same programs and does not save changes made such as dock preferences

every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.

every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.

Since my last sync artists that start with 'The' are now under 'T'. How do I change it back so 'The National' is under 'N'?

Does any one know how to change the ordering of the artists?

Did you try Safe Mode?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I just bought an adobe photoshop elements 10 program that came with the discs but it will not let me

It won't let me load it because it wants a serial number and none of the numbers I found on the case work what do I do

Serial number retrieval process FAQ | Point-of-sale activation products
Mylenium

I can't unlock my 2 old iPhones with the network as they're not the original handsets. How do I find the new IMEI numbers please?

How do I find out the IMEI numbers on handsets that have been replaced following water damage?

how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US

Blocking all numbers that start with +23

Hello,
I have a big problem, because someone from Nigeria is calling me all the time (i dont know where did they get tnis number!!!). I tried to bock their numbers, but whenever I do that, they just change the number and call again. I think I have bloked over 100 numbers, but they keep calling!
Is there any possiblity to block all numbers that starts with +23?
Tnx

Hi,
You will not be able to do this.
If the material number is fully numeric you can only have leading zeros On or OFF, you cannot store a material number with differeing leading zeros.
If this was a new implementation you could have set the "lexicographical" flag on the material master controls and you could then have whatever leading zeros you wanted, but this flag can ONLY be set BEFORE you add your first material and so you no longer have the option.
If you really MUST have this option then define an external number range for alpha characters and use an alpha character on the end of the number, so for 00456 you would have to create 00456a and train your users to ignore the "a". This is a really bad solution but you have no option of having variable numbers of leading zeros.
Sorry
Steve B

[svn] 3794: Fix loading RSLs with URLs that start with "./" or "../"

Revision: 3794
Author: [email protected]
Date: 2008-10-21 14:21:45 -0700 (Tue, 21 Oct 2008)
Log Message:
Fix loading RSLs with URLs that start with "./" or "../"
QE Notes: Only one "./" is supported at the beginning of the path. Multiple "../" may be in the path, but only at the beginning of the path. No mixing of "./" and "../" is supported.
Doc Notes: None
Bugs: SDK-17696
Reviewer: pfarland
tests: checkintests, RSL mxunit
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17696
Modified Paths:
flex/sdk/branches/3.2.0/frameworks/projects/framework/src/mx/utils/LoaderUtil.as

Oh I am using Dreamweaver to put it on the web :-)

OAS10g Oracle_Home /opmn/logs/states Directory - Empty Files Starting With The Letter 'X'

In my Oracle Application Server 10g directory, Oracle_Home/opmn/logs/states, I see four 0 byte files starting with the letter 'x' followed by 10 digits. The remaining five files (ex: p1234567890) are your normal OAS files that keep the information about the PID's of its processes. My question is: can someone explain to me what these empty files that start with the letter 'x' are? Thanks.

In my Oracle Application Server 10g directory, Oracle_Home/opmn/logs/states, I see four 0 byte files starting with the letter 'x' followed by 10 digits. The remaining five files (ex: p1234567890) are your normal OAS files that keep the information about the PID's of its processes. My question is: can someone explain to me what these empty files that start with the letter 'x' are? Thanks.

ITunes cannont backup the iPhones because a session could not be started with the iPhone" I've never connected my phone to any other computer and it worked fine a the other day. Help Please?

I'm trying to sync my iPhone 3G S to my computer. Midway through I get a message "iTunes cannot backup the iPhone because a session could not be started with the iPhone." I have not connected my phone to any other computer and this just began happening within the last day or so.
PLEASE HELP!!

One of your backup files might be corrupt. Try following the steps in this article to correct the issue: http://support.apple.com/kb/ts2529

My Tags that started with a number are gone! I've tagged links with the tag: "3D". they are not in my tags!

Similar Messages

Maybe you are looking for