My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert
Similar Messages
-
My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert -
PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag -
While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.
Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here -
I have read the manual, but as I can see there is nowhere where it tells me how to put my Pages document in iCloud storage, could someone tell me?
Here is some information on how to get a document from your iDevice to iCloud (which means you need to have the iOS version of Pages installed on your iPad or iPhone:
http://www.apple.com/support/icloud/documents/
And here is a slew of other help articles:
http://support.apple.com/kb/index?page=search&src=support_site.psp.more&locale=e n_US&q=Documents%20in%20the%20Cloud
And, icloud is not really "storage" - it is meant to "push" a document you create on one iDevice to another.
FWIW, I assume you are on Lion? Please change your profile - it still shows 10.5.8... -
Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ? My files are not corrupted after it is done like many other threads i have readed. Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....
Yup same here
I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
Still locks up iTunes for between 2 minutes up to 20 minutes.
Really annoying.
If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all -
Hi I purchased iphone5 in uk..Now am in India before coming I unlocked my iphone using my mail id.but now its not activating they telling now this mail id is not used to unlock this iphone.what can i do now?please anyone tel me the answers
Only the Carrier it is Locked to can Unlock it.
Contact the Carrier. -
yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???
Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?
Sorry I do not know what the problem may be. <br />
If no-one comes up with better ideas of what causes this then my questions and suggestions:
What do you mean by an infinite loop ? <br />
The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
* did you disable all plugins - and did you still get the problem then ?
As you mention disabling javascript stops the problem, have you tried with<br /> Java script enabled but
* block popups ON
* load images automatically OFF
* advanced options - ALL OFF<br /> What happens do you get the problem then or not.
While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ? -
I have downloaded an update for my ipod 4th, and after that all my songs, pictures and apps have been erased, Is there some way to recover all my information without have done a security copy?
I supsect you did the update on other than your syncing computer. If yu did the app, music and synced photo will not be on the iPod after the update since those items are not in the backup that iTunes makes. See:
iOS 5: Updating your device to iOS 5
The above applies to all updates performedvia USB on a computer. To get stuff back, restore from backup on the syncing computer.
The above in my educated guess since you provided litle information about how you did the update.
You can redownload many iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have just updated my iphone 3gs to the latest software however it wont activate the phone now. What can I do? Need a reply ASAP. Thanks
If you are experiencing Activation Problems because your Device has been Hacked / Jailbroken / Modified...
Then... Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?
Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea. -
I use 1 Icloud account with 2 devise but the other devise arrest out my devise throue find my iphone, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?
Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh
Maybe you are looking for
-
Oracle Security : what do you think about the following policy violation ?
If you install OEM10, you will be able to see if you violate some security guidelines : Interresting is revoking UTL_FILE from public, which is critical. Also revoke UTL_TCP and UTL_SMTP. This is going to upset an expert I know... Take care about the
-
Control 2 flv movies with one button
Hello, I am not even sure this can be done, but I am trying to control 2 flv's with one set of controls. The reason; We have footage of a talking head as one flv and footage of a microscope. Basically, the guy talks and moves the microscope around. T
-
Can I use an image file as background in JFrame? (i.e) Instead of painting with single color, can I set an image ?
-
How to edit pdf formulars on the ipad app? Are there any restrictions? Thanks for your help!
-
Commons-logging Error when starting JRun with Flex
Created new JRun Server and deployed Flex2 to this server. Receiving this error when starting up this server instance. Starting Macromedia JRun 4.0 (Build 92909), logicerm2 server 07/13 22:23:28 info JRun Naming Service listening on *:2911 07/13 22:2