My Telus wireless only works with WEP, but if I switch to WEP the wireless goes down on the other Windows computer being used in the same house. Is there a way for both of us to get wireless internet or do one of us have to be connected by the ethernet?

My Telus wireless only works with WEP, but if I switch to WEP, the wireless on the other computers in the house (which is Windows and WPA) stops working. My computer works with the ethernet cord but I want to be wireless too! Do one of us have to sacrifice our wireless?

For assistance in getting your MacBook to connect to a WEP-protected wireless network, please check out this Apple Support article: AirPort: Joining an encrypted WEP or WPA Wi-Fi network

Similar Messages

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced.

Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced. Any suggestions?

I'll guess you've already discovered the answer to this, but just in case:
Reminders works with Outlook tasks by syncing with iCloud, or through Exchange. You can't sync iOS Reminders with Outlook Tasks via USB/iTunes (like you can do with Notes, Calendar, Contacts).
So the marketing material on Reminders is a little misleading in that it's not specific enough -- there is no syncing without one of those intermediary systems mentioned above.
On a side note, syncing Tasks/Reminders via iCloud is not very good in my opinion:
Requires that you sync to the cloud, even if you have no other use for storing personal data in the cloud.
Requires that the iCloud Control Panel be installed on your PC (not sure about Mac).
After syncing, you'll find new Calendar and Task groups called "iCloud" have been created in Outlook. The calendar groups appear to be created even if you're only syncing Tasks/Remminders (not sure why).
Reminders are stored in the new group (noted above) called "iCloud" rather than in your default Tasks group. This seems to me to be a sort of "parallel" sync, rather than a true sync with Outlook. There are oter implications of your synced tasks being in the new group that I won't go into here, but you can search the interwebs to learn more.
In my own case, I tried iCloud syncing, decided that I didn't like it for the reasons stated above, and then uninstalled (Control Panel and new Outlook groups) with no apparent ill effects.
Though I don't guarantee you'll have the same results, it might be worth a try to see if it suits your purposes.

My i chat doenst work with anyone but my sister who lives in the same house

Hos do i get my ichat to work with other people, becasue it only workes with people in the same house, and when i try to do it with other people it says failed , i failed to respond even when im the one who sent the invatiaion...
can anyone help me!!!
please!!

Hi MandaManda1021,
Oh My !
Ok Start with going to System Preferences > Network
In the second of the two drop downs select the method your Mac is connected to the next device "up" towards the internet.
Use Airport to a Apple Airport Base Station OR a Wireless router or modem. (Built-in Ethernet if cables or leads are used)
Select the TCP/IP tab so it is Blue if it is not the first tab.
Tell us what it says at "Configure IPv4" please.
Tell your IP which is shown under that please.
Also this screen will tell you what the "router" IP.
(in the case the word Router could mean the box that connects to the internet (modem) ).
At this point the "router" IP could be an Address from your ISP (Internet Provider). You can tell by the IP that is shown.
If from one of these groups it is from the device itself.
Anyhting starting with:
10.xxx.xxx.xxx
192.168.xxx.xxx
172.16.xxx.xxx through to 172.32.xxx.xxx
Apple's own Airport devices are normally 10.0.1.1 for instance.
A Linksys device is likely to be 192.168.1.1
Next tell us if there are two devices between your comuter and the internet (modem and router)
Tell us the make and Models please.
Next tell us anything you know about how they were set up to communicate with each other (even if this is "we just plugged them in and wired them together" as this will tell us they are in default mode).
Some reading.
This is page 4 of my Site. It starts with the ports that should be opened in the Mac firewall if it is ON.
It goes on to tell you how and where to look for information.
If you think you are making progress then read this FAQ
http://discussions.apple.com/thread.jspa?threadID=527902 and post back the answers to the questions posed. Numbering the answers will help.
It will also help if you tell us which ones you don't know how to find out.
12:10 PM Sunday; December 10, 2006

Is there a way for java plug-in to get the browser login authentication

I have an applet that is loaded from a password protected html page. I use java plug-in with the applet.
When I try to read this page I get the browser window asking for password and username. So far so good.
Then I log in successfully and starts using the applet.
If the applet wants to access pages on the same PW protected area, I have to give the plug-in PW and UN.
My question is then:
Is there a way that java plug-in can get hold of the login information that the browser has obtained? (So that I wont have to give the same information twice)
I thought the answer would be no, but then I started experimenting with https and found out that if I use the same scenario as above, except from that I give a certificate to the browser before the first login, then the plug-in will get certificate info from the browser, and it wont promt me for UN and PW either!
When it is possible for the plug-in to obtain certificate info and login info from the browser then it should be possible just to get the login info with ordinarily http?

bump

Scanner problems LIDE60, only works with XSane, but Xsane is buggy!!

Hello everyone, I'm trying to get my LIDE 60 scanner working properly with Arch.
Xsane work OK with it, but it doesn't seem to work with anything else (I installed gnome-scan and sane-pygtk from AUR).
Both these apps do not see it at all.
I like XSANE, but there is a bug with it: I cannot select the area I want to scan in the preview area.
When I try to drag/enlarge/move the selection box, it dissapears and goes elsewhere on the window...
(I would PREFER fixing Xsane, but in the meantime, would like to try other apps)
Here is my LSUSB output
[charles@amdx2 ~]$ lsusb
Bus 002 Device 002: ID 045e:009d Microsoft Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04a9:10c4 Canon, Inc.
Bus 001 Device 003: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
the output from scanimage -L
[charles@amdx2 ~]$ scanimage -L
device `genesys:libusb:001:003' is a Canon LiDE 60 flatbed scanner
genesys IS enabled in /etc/sane.d/dll.conf
Here is the output from flegita/gnome-scan
as you can see it seems to be ignoring the scanner it finds...
"see line ** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored"
Please, please HELP I'm not totally new... just been on Windows for a couple years,
but i've been installing Linux on and off to try. (so far, Arch seems a keeper. take a while to install
but it's great!)
[charles@amdx2 sane.d]$ flegita
** (flegita:11223): DEBUG: gnome-scan-init.vala:33: Initializing GNOME Scan 0.7.1 for flegita
** Message: gsane-module.c:53: SANE version is 1.0.20
** Message: gsane-module.c:53: SANE version is 1.0.20
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneBackend'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSaneScanner'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileBackend'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileScanner'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileOptionFilenames'.
(flegita:11223): GLib-GObject-WARNING **: Two different plugins tried to register 'GSFileFilenamesWidget'.
/usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: Invalid symbolic color 'tooltip_bg_color'
/usr/share/themes/Darklooks/gtk-2.0/gtkrc:181: error: invalid identifier `tooltip_bg_color', expected valid identifier
(flegita:11223): GLib-CRITICAL **: g_utf8_strlen: assertion `p != NULL || max == 0' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
** (flegita:11223): CRITICAL **: gnome_scan_scanner_selector_on_scanner_added: assertion `new_scanner != NULL' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(flegita:11223): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed
** (flegita:11223): DEBUG: SANE device genesys:libusb:001:003 failed or ignored
** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured
** (flegita:11223): DEBUG: gnome-scan-dialog.vala:400: job status updated to unconfigured

BTW, this is on a fresh install of Arch done yesterday: Linux groovy9 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
For a plan B, if there's a straightforward way to custom compile my own kernel, I'd like to try a slightly older one to see if I have better luck. This same model of scanner is working fine on a 3.5 kernel, for example.
Last edited by groovy9 (2013-10-09 21:34:22)

My I pod only works with double click and I can't drag the screen with my finger?

Hi,
My i-pod doesn't work very well at the moment.
I can't drag over the screen en have to double click on my screen. I can't drag the screen from left to rigth and not from above to below.
The hard reset didn't work and i can't reach the menu where i can restore all setting. My son alternated one of the direction.
who can help me?
thanks
gtz Ton

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Why Doesn't Project TV woek with IE but not Firefox? I tried the "Proxy" suggestion with no results.

Project TV works fine with IE. It used to work with Firefox but no longer. I tried the "Proxy" suggestion and clearing History with no results?

scher2000
First and foremost, thank you for your help and concern. It is appreciated.
Project TV works just fine with IE but will not work at all with Firefox although it did work a few days ago. I have tried::
Clearing History, as suggested,
Changing the "Proxy: settings, as suggested
This has been all to no avail.
Link:
http://www.free-tv-video-online.me/
Also, my WOW Speed test works fine with IE but not with Firefox; I just ried it on both.
Link:
http://speed.nap.wideopenwest.com/
I prefer Firefox but it appears to be giving me problems resulting in having to use IE.
Again, Thank you.:

Is there a way for all attachments to be 'viewed as icon' both sending and receiving?

In Mail for Mac OSX 10.9, is there a way for all attachments to be 'viewed as icon' both sending and receiving?

Not sure if this still works with Mavericks, but in Terminal try:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

Safari is not working and siri only works with the phone not internet related questions.

I have an Iphone 5 and for about 8 months it worked find, then somewhere along the line I think about the time I upgraded to the latest OS, Safari stopped working. That is when I hit a link from email or open safari I get the browser window but nothing works, like its been blocked. Siri of course only works with internal serches, through contacts and such. My other browsers (crome, oprea and mercury) work fine. I have been through all the internal settigns I can find, but nothing has worked. Have cleared history cookes with no suceess. Any ideas?

Hello Mike,
Thank you for providing so much detail about the issue you are experiencing with Safari after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the apps that are open, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

I bought the external DVD player/burner for my Macbook. I tried using it with my Dell laptop but it will not work. Is it not configured to work with anything but apple operating systems?

I bought the external DVD player/burner for my Macbook. I tried using it with my Dell laptop but it will not work. Is it not configured to work with anything but apple operating systems?

If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
Sorry,
Clinton

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

My Telus wireless only works with WEP, but if I switch to WEP the wireless goes down on the other Windows computer being used in the same house. Is there a way for both of us to get wireless internet or do one of us have to be connected by the ethernet?

Similar Messages

Maybe you are looking for