My time capsule connotes only with ethernet and not wireless why?
my time capsule connotes only with ethernet and not wireless why?
Firstly, try a factory reset. This can often iron out problems like this.
Also, what generation is your TC? What version of AirPort Utility are you using?
Similar Messages
-
How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?
MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC. -
Why does the Time Capsule of my neighbour appears and not mine?
Why does the The Time Capsule of my neighbour appears and not mine? I tried everything.
Can I use the Capsule as merely a back up without making use of Wifi? By connecting by cable to the computer?Why does the The Time Capsule of my neighbour appears and not mine? I tried everything.
What generation is your neighbour's and what generation is yours??
Sometimes the changes in the TC and firmware can make wireless fail.. also location is important.. the location of your neighbours might be better than yours.. his also might interfere with yours.. set a fixed channel and try the various channels.
Can I use the Capsule as merely a back up without making use of Wifi? By connecting by cable to the computer?
Sure, but you need to work out how the network is going to work.. if you are still picking up network from wireless.. then set static ip for the TC in a different IP range.. set no gateway (router ip) or dns and it will work just fine. -
Time Capsule Video Stuttering in OSX and not Windows Vista/7
Hi,
I have a MacBook 1.6 GHz D-core. I store all my video content on my Time Capsule, 500GB. Whenever I try to stream a video over the network, via TC, it stutters. Whether that be SD or HD content.
When I try to stream the same content on Vista or Windows 7 I have zero problems.
The suttering happends about every 15 seconds and seems like it skips a frame or two. The audio cuts out as well but it's less than a second long and the video goes back to normal. It wouldn't be a big issue however it happends about 3-4 times a minute and I find it annoying.
I'm not sure why I have no issues on Vista/7 but have problems with OSX. Any advice?
Message was edited by: PaulJO
Message was edited by: PaulJOHi,
I have a MacBook 1.6 GHz D-core. I store all my video content on my Time Capsule, 500GB. Whenever I try to stream a video over the network, via TC, it stutters. Whether that be SD or HD content.
When I try to stream the same content on Vista or Windows 7 I have zero problems.
The suttering happends about every 15 seconds and seems like it skips a frame or two. The audio cuts out as well but it's less than a second long and the video goes back to normal. It wouldn't be a big issue however it happends about 3-4 times a minute and I find it annoying.
I'm not sure why I have no issues on Vista/7 but have problems with OSX. Any advice?
Message was edited by: PaulJO
Message was edited by: PaulJO -
Airport Express only works through Ethernet and not wireless
Hi there,
As it states in the header - Airport Express works when I connect it either directly to my iMac or through my Cable modem using an ethernet cable. Unfortunately, as soon as I unplug the ethernet and try to use it wirelessly, it disappears from the AirPort Utility view and I can no longer connect. Strangely the green light stays on solid, no flashing.
I'm no wireless connectivity expert so am sure it's something basic I've missed. Would be most grateful of any pointers.
ThanksFor the short term ...
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing BT HomeHub's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
For the longer term, since the BT HomeHub is not WDS-compatible with the AX, the AX would need to be connected directly, via Ethernet, to the BT and then re-configured as a bridge to allow the BT to continue to provide NAT & DHCP services for the entire network. -
Both my husband and I have our MacBook Pros backed up to Time Machine. I have a new MacBook Pro and want to download my files, etc. from Time Machine to my new Mac. I do I ensure that Time Machine downloads only MY files to my new Mac, and not my husband's files?
OS X uses a unique identifier so there will be no problems.
-
Airport express works with ethernet and not wifi HELP
ive just changed my router to a Dlink on aol, ive connected the airport express to the new wi-fi as well as my macbook and iphone. The light has gone solid green but wont connect to the mackbook or iphone to play music. If i connect with a ethernet lead it works. Then if i take the lead out it still works for a few minutes then cuts out. Without the ethernet my mac doesnt find find it wirelessly.
Ive reset it several times but it just doesnt seem to like it. Please help!!After Grant pointed out the DNS thing, I started to check that part, and I noticed something funny. I called Apple Support regarding the problem, and now it's solved
Here is my experience:
1. My Airports worked fine when home, but not at work.
2. Checking the LAN DNS addresses I received three addresses. 2 in the 158.xx... range and one in the 129.xxx... range.
3. The Airport Extreme and Airport Express does only support two DNS addresses, and since the two 158.xx... DNS addresses came first in that range the 129.xxx... was left out.
4. I manually changed one of the 158.xx... addresses to the 129.xxx... address I got on my MAC / PC when I connected directly to the wall and did a "ipconfig /all" on the PC. The three same addresses is listed under network - airport on the MAC.
5. Now suddenly it all worked. This due to that the two 158.xx... addresses seamed to be internal addresses, and the 129.xxx... address was from outside delivered from our operator.
Summarized:
When you receive 3 DNS addresses you MAC and PC can handle it fine, but your Airport not. Find all your DNS addresses and write them down. Enter Airport Admin Utility and do a manual setup. Change one of the two equal address to the third address. Most probably listed as the last DNS address when you are connected directly and type e.g. "ipconfig /all" on your PC or you enter the network settings.
Best regards,
Bouw -
I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
I have tried rebooting the time capsule and the new mac - didn't help.
Any information as to what I can try would be most welcome.
Many thanksHi All
I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
I hope this helps someone!! -
Why does time capsule go missing from the network. The green light is lit at all times. I am unable to use the software the only thing I can do is power cycle time capsule, by unplugging and plugging the mains back in.
My time capsule is only a few weeks old, any ideas?
I am new to apple products very impressed with iPhone 5, I pad, iMac. Really not sure about time capsule!
ThanksAn external drive is much more reliable.. the issue has to do with network connection and loss of something.. although I am sorry I cannot tell you exactly what. The computer is still connected, still works on internet but has actually lost the hard disk.. lost and cannot find it without a restart.
If you want to try a few changes it can help.
1. If you are connected by ethernet make sure wireless is off in the imac.. having only one network connection is better than two.
2. Redo the TC setup with all short names.. no spaces.. pure alphanumeric. Apple has these long names with spaces and characters like apostrophe by default but they are not a help.
3. If the TC is the main router then reduce the dhcp lease time.. make it 20min.. that keeps everything refreshed and up to date.
None of those fix it but they may help stretch out the interval. -
The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available. Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
When I go into the time capsule - it shows me NOTHING as being in the backup datas. So, I don't know where to begin to delete all the old data off the
time Capsule and start with a completely empty machine.Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes -
Dual Band Network: Time Capsule (N only) and Linksys (B/G) Works *Long*
Ok, so this was more tedious than I thought it would be, but things actually seem to be working at this point.
Goal: Create a Dual Band network with Time Capsule (N only) and a Linksys WRTSL54GS (B/G)
Time Capsule: 1000BaseT wired, and 802.11N 5Ghz only wireless
Linksys: 100BaseT wired, and 802.11G 2.4Ghz wireless
Airport Utility 5.3.1
Time Capsule v. 7.3
I set Time Capsule up first, following the step by step directions for "Create a wireless network"
802.11N only, 5Ghz
WPA2 Personal
DHCP 192.168.1.1 (kinda important)
This worked fine-tested on a C2D iMac, both thru ethernet and wirelessly thru N. Time Machine backed up fine.
Now the tricky part, configuring the Linksys.( I just want to mention I had to reset this thing completely about 10 times to get it to work, using a miniscrewdriver)
Starting with a freshly reset Linksys, I connected from my MacBook ethernet port to one of the Linksys ethernet ports (Not the WAN)
I disabled Airport
I logged in to 192.168.1.1 using blank for login, admin for password (default for Linksys)
I did the following:
1) Confirmed Internet Connection Type was "Automatic Configuration-DHCP"
2) Changed Network Setup to "DHCP Server-DISABLED"
3) Turned off the Firewall settings in Security (not sure if this is necessary)
4) Changed the Operating Mode from "GATEWAY" to "ROUTER"
5)Changed the SSID to "LinksysG_ONLY" or something like that
After each one of these steps, I had to save the configuration, thru the Linksys browser interface-which blows.
6) Finally, I changed the Local IP Address of the Linksys from 192.168.1.1 to 10.0.1.251 (thanks to Henry B. for that)
7) And....I no longer had access to the Linksys at all! This stumped me for a while, until...
8) I checked my Ethernet settings (in System Preferences/Network): 192.168.1.1 was set as default router address. But my Router (at least for configuration purposes) was now 10.0.1.251, so it could no longer find it.
9) So I added a new Ethernet port (using the "+" sign), called it Ethernet-Linksys. Set it to Manual. Put in an IP of 10.0.1.250, and a Router IP of 10.0.1.251.
10) I got access to the Linksys setup page again! (Note: I'm sure there is an easier way to do this, but this is how I got mine to work )
11) I set up WPA security again, set it to an unused channel (2 in my case), mixed b/g network.
12) Finally, I moved the ethernet cable from my MacBook directly to one of the ethernet ports on the Time Capsule. I did NOT hook up the other end to the WAN on the Linksys (which for some reason I had done 100 times before) I left it in one of the 4 ethernet ports on the Linksys. Repeat, the WAN (ethernet) port remains empty.
13) I then turned Airport back on the MacBook, connected to "LinksysG_ONLY", and...I was online. And everything seems to work.Hi kjk et al,
I've been searching the boards for something like what you have described in such nice detail. Before Time Capsule, I used a Netgear g router connected to the cable modem and an older Apple base station connected to the Netgear as a bridge. I removed the Netgear and set up my Time Capsule as the primary. The newer computers in my network can access the Time Capsule, but the old Dell with a 802.11g wireless card cannot. I don't remember seeing where I could access TC to change a setting of "N only" or b/g, but I am guessing that it is running N.
I tried to follow the steps you used for Linksys. The pre-step 1 thing, resetting it "10 times to get it to work" - how do you know when it is really reset? With Netgear plugged into electricity, I stuck a paper clip into the hole labeled on the diagram as "restore factory settings" and watched the color of the IO icon change from green to amber to green. I did it again for good measure.
I plugged ethernet from PowerBook G4 into Netgear not-WAN ethernet ports (like your MacBook to Linksys). I disabled Airport. Using Safari, I logged into 192.168.0.1 and got to the Netgear SmartWizard configuration assistant. It says, "No Internet Connection Detected. Please check the connections to the Internet WAN port and cable/DSL modem" - so I looked at your instructions but see no mention of connecting the router to the modem.
Trying to follow your numbered steps...
1. In SysPrefs: Network, Location showed Automatic, Configure showed Using DHCP.
2. I don't see an option in Network to "DHCP Server-DISABLED", but I can choose Configure: OFF. I clicked Apply but browser still gives same message.
I don't know how to continue the steps. -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?
You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility. -
I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.
Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !! -
my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.
I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)
Maybe you are looking for
-
Should I get the MacBook Pro 13" with retina display or the non retina display MacBook Pro?
Hi, I am just about to start sixth form, and I am looking for a laptop/notebook to do my work on, I have always wanted a MacBook Pro so, as I have to use my own money to buy this I have decided to choose a MacBook Pro as my preferred device that I wo
-
Hi everybody, I am trying to register a rdf file into Oracle EBS but I get some error.which its log is at below: Application Object Library: Version : 12.0.0 Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved. ZMIGREGHRPASANDAZ module:
-
Signing on error in application server
PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2 PSAPPSRV.3312 (0) [2013-03-20T20:12:23.571](0) Cache Directory being used: D:\PT853\appserv\DB290401\CACHE\PSAPPSRV_2\ PSAPPSRV.3312 (0) [2013-03-20T20:12:24.007](3) File: SQL
-
My ADE keeps crashing when I try to transfer a book over to my Kobo. What can I do?
Can anyone help me? I cannot get books transferred over to my Kobo! ADE keeps crashing!
-
Dear All, I want to know the object description for object id- 58. Let me say for an example object description for object id 2 is Business Partner cards.Like wise i need for object id 58. With Regards, G.Shankar Ganesh