My Time Capsule disappears after restarting on setup and blocks the internet

Hi There
I have just got a new Time Capsule and am trying to set it up at the moment, but am having a big problem. Every time I go through the setup, at the end of it it says that the settings have been updated, and the Time Capsule now needs to restart. However, after the restart my Macbook then can't find the Time Capsule, and my Internet is not working. At this point I go into Network preferences and re-select my home Wifi Network, and reset the Time Capsule. Once it has been reset my Macbook can see it again, but it obviously needs to be re-setup and the whole process starts again.
I am not trying to use my Time Capsule as a Wifi network, I just want to use it for backup and as an external hard drive.
I am trying to connect my time capsule to my wifi network wirelessly.
I'm pretty new to the world of Mac, and not overly technical, so if anyone can help me it would be much appreciated.
Question - Does the time capsule need to be connected via an ethernet cable to my Wifi Router?
Thanks for your help, I really appreciate it
Chris

Seabass78 wrote:
Hi There
I am trying to connect my time capsule to my wifi network wirelessly.
I'm pretty new to the world of Mac, and not overly technical, so if anyone can help me it would be much appreciated.
Question - Does the time capsule need to be connected via an ethernet cable to my Wifi Router?
Thanks for your help, I really appreciate it
Chris
Apple do not make their products compatible with those of other companies.. the very thought of it sickens their bottom line. It may not be impossible to do WDS with other brands.. but you will lose more skin than you can afford to, and the bleeding edge is unpleasantly sharp.
And to answer your question.. yes, the TC needs to be connected by ethernet, unless you are going to use another apple airport product, AEBS, Express or another TC.
Then the question comes in do you run the TC as the main router.. or bridged.. you will see those two options. In general the TC behaves better as the main router.. but it isn't universal. In bridge you will have full access to all the facilities that you are likely after except remote connection. (which should still be possible albeit very difficult.. more skin loss.)

Similar Messages

  • I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

    I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

    renatocremonese wrote:
    I want to use it for backing up my Mac.
    It's good for that . . . 
    But also I don't keep all my stuff in my Mac.
    But not for that. 
    This older and not day-by-day usage files I want to store in the time machine.
    You can do that (see below), but how are you going to back them up?   If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
    Is it possible to split TC in two partitions.
    No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space.  See #Q3 in Using Time Machine with a Time Capsule.
    But you still won't have backups of the stuff you put there.
    You don't say what kind of Mac you have.  If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
    However, it sounds like you may have a laptop, where that's not going to be convenient.  In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
    To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
    Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
    You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

  • Why do my images disappear after I animate them and choose the playback button to preview the animations

    Why do my images disappear after I animate them and choose the playback button to preview the animations

    Sorry, but the information you provide isn't even close to the amount we need to help us help you:
    FAQ: What information should I provide when asking a question on this forum?

  • I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

    Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
    I am unable to connect to my internet via. wifi on my Playstation.
    I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
    Please help?
    I tried being the most descriptive I could

    I am only able to connect to the internet on my main computer.
    What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
    When you open the airport utility on the main computer.. click on the TC what errors does it show?
    They will list in the summary.
    What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
    Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
    The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
    What model TC do you have??
    You can slow the LAN port down or specify the actual speed in the Gen1-4.

  • Time Capsule has green light, but unable to access the internet

    My Time Capsule has a green light, but all devices (wired and wireless) are not allowed out to the internet.
    When I connect my iMac directly to my internet router, I am able to access the internet, so I have isolated the issue to the Time Capsule.
    The Time Capsule receives an IP address from my internet router via DHCP and I can see this address in the Time Capsule config, but for some reason the Time Capsule is not allowing internet access to both wired and wireless clients.
    Thank you.
    --SN124B

    Verify that you have a working Ethernet cable.
    Then verify that the Ethernet cable is connected from one of the LAN <-> ports on your main router to the WAN "O" port on the Time Capsule.
    Check again to make sure that the Time Capsule is configured in Bridge Mode
    Power cycle the entire network as follows:
    Power off all devices in any order you want
    Wait a few minutes
    Start the modem or modem/router first and let it run a full minute by itself
    Start the main router next the same way
    Start the Time Capsule the same way
    Continue starting devices one at a time until everything is powered back up
    Check the network

  • Time Capsule disappears after back up

    Hi
    I run and iMac 27 with the latest version of Lion on it and I have been having trouble with a new Time Capsule. My TC is connected to my wireless Belkin router via an Ethernet cable. After some initial set up problems (during which I upgraded the firmware on the TC to the latest version) I finally managed to get the IMac to see the TC and then commenced the first back up. This was scheduled to take a number of hours so after baby sitting it when there were no problems, I left it overnight, setting the screen to switch off but the machine to remain on. When I checked the next day the TC drive had disappeared. The only way I could get the TC to reappear was to reboot both router and TC, at which point I then restarted the back up which appeared to pick up from where it stopped (in terms of time to complete). Having to leave it overnight once more, I was disappointed to discover the same thing happened again. So rebooted again and recommenced the process. This time I managed to see it through to the end and was amazed to see the process complete and then the TC icon on the desk top disappear. Clicking on the TC icon on the toolbar and selecting back up now the system reported a message that the back up was delayed as it could not find the back up drive. All the time the router was connected to the Internet and the green light on the TC was solid.
    I have had a look at a number of threads and can see a number of people having connection problems but nothing exactly like mine so I am hoping it is just a setting. Any help or ideas would be gratefully appreciated
    regards
    Keith

    mfez wrote:
    I did a restore,
    If you mean you restored your entire system from your backups, that's why TM is doing a new full backup: http://support.apple.com/kb/TS1338 (although some of the TM engineers claim this doesn't happen anymore in Snow Leopard, it does -- I tried it).
    My hard drive is 285.48 GB with 24.11 GB available. Not sure how big the TC is. The message says I need 300 something GB for the backup, but only 128 mb is available. Should I erase it and start over?
    That means you have about 261 gb used on your internal; TM adds 20% for workspace and "padding" when making room, so that's why it needs over 300 gb.
    TC's used to be 500 gb, recently only 1 tb and 2 tb models are available.
    So if it's a 500 gb model, there isn't room for two full backups.
    Do you have anything else on the TC besides TM backups? If so, then delete the sparse bundle via the Finder.
    If not, you can just erase the TC:
    Use the +*Airport Utility+* app, in your Applications/Utilities folder.
    Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.

  • Can I use apple TV on home network with time capsule or Airport Xtreme without being connected to the internet?

    I'm wondering if I can use Apple TV to play movies and slide shows on my TV, play music over my sound system and print from my devices (Iphone 4S, iPad and MacBook pro 2011) by using an Airport Xtreme or Time Capsule (to back up the devices) if those devices are not connected to the internet. Can anyone advise pls? Reason for this is that I work on a moving ship and don't have an internet connection to speak of for much of the time (and if I do it's a wireless system that I need to pay by the minute and that is too slow to support the Apple TV), but would all the same like to create a wireless environment where my devices can interact with each other. I seem to get conficting info and a rep at the apple store in Honolulu told me that you cannot use Airport Xtreme or Time Capsule without an internet connection (it was busy, he may have misunderstood my question).
    Looking forward to your input.

    Don't try to home share it.. as that is dependent on using Apple ID.
    Just airplay to the ATV.. iTunes: Using AirPlay
    The movie should play exactly as your doing music.. but get rid of the whole home share if that is causing issues.. there is no mention of needing home share in the above..
    If you still have issues you might need to do it other ways.. like export the movie from itunes.. and play it using vlc which should allow you to stream it to the apple TV using airplay.
    That is a bit tricky and I have not used that setup but it should work.
    http://apple.stackexchange.com/questions/23412/can-i-stream-any-video-played-wit h-vlc-player-to-apple-tv
    If you have a hunt around you should find it fairly easy to do.. but straight airplay should work.. there is a very recent update to ATV which might help it with airplay.

  • Time Capsule disappears from desktop

    Hello,
    since the last update to version 7.6.3 Time Capsule disappears after about 150 seconds from the desktop. This disturbs my workflow quite strong, because I use the Time Capsule not only as a Time Machine backup, but also as a network storage. Where can I set that the Time Capsule will remain permanently on the desktop?
    Thank you for your kind assistance.
    Franz
    PS: Please excuse my bad english.

    Hi Jay,
    1. start the Airport-Utility
    2. click on „Manual Setup“
    3. click on „Version“ („Overview“ Sreen –> third row)
    4. choose the Firmware Version you want to install
    After downgrading the Time Capsule restarts automatically and does no longer disappear from the desktop after a while.
    Although I am not an english native speaker I hope that the guidance is understandable.
    Greetings from Cologne, Germany
    Franz

  • Time capsule problems after OS reinstall

    After getting a blue screen on restart I had to do an archive/OS reinstall today. The reinstall worked fine but I am now having problems accessing my Time Capsule.
    At first my computer didn't even recognize my time capsule. After restarting my time capsule, my computer recognized it. However, when I tried to open time machine to access the files, it stalled on "connecting to backup volume" for about 45 minutes and never connected. Similarly, the backup stalls on "preparing backup." I tried to stop backing up but it is currently stalled on "stopping backup." Finally, time capsule has disappeared from the menu at the top of my screen.
    Any thoughts on addressing these issues would be greatly appreciated.

    I have the same problem as well. I did an archive and install with OSX, then updated to 10.5.5 and now all the TC does is spin and say preparing. A sample from the console is
    Nov 12 09:46:11 Macintosh /System/Library/CoreServices/backupd[204]: Waiting 60 seconds and trying again.
    Nov 12 09:47:27 Macintosh /System/Library/CoreServices/backupd[204]: Network volume mounted at: /Volumes/Erik Elie's Time Capsule
    Nov 12 16:01:05 Macintosh /System/Library/CoreServices/backupd[204]: Failed to mount disk image /Volumes/Erik Elie's Time Capsule/Erik Elie’s Computer_0017f2ccba9f.sparsebundle (DIHLDiskImageAttach returned: 109)
    Nov 12 16:01:05 Macintosh /System/Library/CoreServices/backupd[204]: Waiting 60 seconds and trying again.
    Nov 12 16:01:06 Macintosh /System/Library/CoreServices/backupd[204]: Ejected Time Machine network volume.
    Nov 12 16:02:08 Macintosh /System/Library/CoreServices/backupd[204]: Network volume mounted at: /Volumes/Erik Elie's Time Capsule
    Nov 12 16:04:10 Macintosh /System/Library/CoreServices/backupd[204]: Failed to mount disk image /Volumes/Erik Elie's Time Capsule/Erik Elie’s Computer_0017f2ccba9f.sparsebundle (DIHLDiskImageAttach returned: 60)
    Nov 12 16:04:10 Macintosh /System/Library/CoreServices/backupd[204]: Giving up after 3 retries.
    Nov 12 16:04:16 Macintosh /System/Library/CoreServices/backupd[204]: Backup failed with error: 21
    Nov 12 16:43:53 Macintosh /System/Library/CoreServices/backupd[204]: Starting standard backup
    Nov 12 16:43:53 Macintosh /System/Library/CoreServices/backupd[204]: Network volume mounted at: /Volumes/Erik Elie's Time Capsule
    Nov 12 16:44:08 Macintosh /System/Library/CoreServices/backupd[204]: Failed to mount disk image /Volumes/Erik Elie's Time Capsule/Erik Elie’s Computer_0017f2ccba9f.sparsebundle (DIHLDiskImageAttach returned: 109)
    Nov 12 16:44:08 Macintosh /System/Library/CoreServices/backupd[204]: Waiting 60 seconds and trying again.
    Nov 12 16:44:09 Macintosh /System/Library/CoreServices/backupd[204]: Ejected Time Machine network volume.
    Nov 12 16:45:10 Macintosh /System/Library/CoreServices/backupd[204]: Network volume mounted at: /Volumes/Erik Elie's Time Capsule
    Nov 12 22:09:24 Macintosh /System/Library/CoreServices/backupd[204]: Failed to mount disk image /Volumes/Erik Elie's Time Capsule/Erik Elie’s Computer_0017f2ccba9f.sparsebundle (DIHLDiskImageAttach returned: 109)
    Nov 12 22:09:24 Macintosh /System/Library/CoreServices/backupd[204]: Waiting 60 seconds and trying again.
    Nov 12 22:09:25 Macintosh /System/Library/CoreServices/backupd[204]: Ejected Time Machine network volume.
    Nov 12 22:10:26 Macintosh /System/Library/CoreServices/backupd[204]: Network volume mounted at: /Volumes/Erik Elie's Time Capsule
    Any suggestions out there??

  • Time Capsule disappears from Airport Utility, need to restart to find it.

    I got a new Time Capsule for Christmas. Our household was using a D-Link router. The network was working fine for a Macbook, iMac, 2 x iPhones, PC Laptop and desktop. The two laptops are upstairs and connect wirelessly to the Time Capsule and an airport Express connected to stereo is set to extend the network.
    Since Christmas the laptops are losing contact with the Time Capsule. At first I'd physically disconnect the modem and TC and the TC would reappear. Finding this annoying I rang Apple. I was told to edit locations in networks, add a location and basically reselect my network. I was told to monitor this, but that it should help. The TC went off airport utility again (the green light was still on), so i went through the process of edit location again and it worked. I posted the problem in macbook internet, thinking it was a macbook issue as my iPhone could still connect to the network and have internet. People suggested i do a power cycle. The next time the network crashed I performed a power cycle on every item connected to the network and turned on in correct order.
    Tonight my macbook and pc laptop lost connection with the internet again. I had to physically take the TC and modem of power to get the network back again.
    This is happening every couple of days, and I'm now sure it's a Time Capsule issue, this issue didn't happen with my D-Link router. I have my Macbook completing Time Machine Backups wirelessly, and when we lose connection with the TC, backups are delayed. Could the Time Machine backups be causing this loss of connection?
    I'm going to call Apple and see if they have another solution, but was checking to see if others have had this problem and maybe a solution?

    I just purchased a new Airport Time Capsule 3TB (ME 182 AM/A)
    I broke my own rules.. as I saw one going really cheap and our currency is dropping like crazy so i thought I better get one .. stupid idea.. it lasted less than week and then refused to even power on.. It has gone back for replacement.
    For your situation I think the problem is not the TC as much as it is yosemite.. but it is the combo.
    Try the things I have suggested in this thread.. they have worked or helped other people.
    Time Capsule keeps losing connectivity

  • Time Capsule Disappears When VPNing

    I have a question regarding the use of VPNs and the availability of a network (ethernet) connected Time Capsule.  I'm using a Time Capsule (3TB from early 2013) that is solely used for Time Machine backups.  I have disabled all Time Capsule router settings, and instead rely on my Asus RT-N66U wireless router for all wireless and wired connections - I also have a 10/100/1000 switch for extra ethernet connections (Time Capsule is directly connected to the switch).  My MacBook Pro currently uses  wi-fi to connect to my local network - I have several network printers  and a NAS, and everything works perfectly when I am not VPN'd into my company network.
    When I VPN into my company network, the Time Capsule "disappears" from my MacBook Pro's network (evidenced by a "Device Not Found" in the AirPort Utility), however all other network devices are still available and ready (most likely since they've been assigned static IPs within my local network).  I have given my Time Capsule a static IP in my network, but it still disappears from my MBP's network. Any Backups planned are delayed and I cannot run the backup manually.  However, I can still use the "Enter Time Machine" option to access data from within the Time Capsule.  What gives here?  Ideally, I'd like to be VPN'd but still have my Time Machine run as planned.  What's even stranger is that once I disconnect from the VPN, the Time Capsule still displays "Device Not Found" for quite some time, but eventually comes back to life.
    Just for edification purposes, I'm using the Cisco AnyConnect VPN software and have enabled the "All local (LAN) access when using VPN" option.  Still no dice.  Any thoughts?

    Routing is being messed up by the VPN or the DNS is not working properly.. either of which amount to the same thing.
    Mount the TC in finder using its IP.
    Go, Connect to server.
    AFP://10.0.1.1 (or whatever IP you have). The complex bit is you are going to need dhcp reservation on the main router to stop the TC from bouncing around its IP address.
    Set that in your Asus main router.. but test it immediately before worrying too much.. if you get it mounted in Finder by IP address.. you can also discover it in Airport utility by using its IP directly..
    You simply need to manually control things.. type in the IP to help it out.
    Also don't forget the ipv6 setup to link-local only on the wireless/ethernet on the computer..
    Tell me how this goes.
    Once you have the TC mounted in Finder.. have another go with TM.. if it still has issues.. change the name of the TC, make it short, no spaces and pure alphanumeric.. see if that helps.
    BTW the windows method of fixing this would be simply edit the hosts file..
    Looking it up there is a Mac equivalent.
    http://www.makeuseof.com/tag/how-to-edit-the-mac-os-x-hosts-file-and-why-you-mig ht-want-to/
    Of course it is essential that the TC does not change IP.. so fix that in the asus as I said and make sure if you shut down and restart the TC it does actually pick up the IP.. you can also try using static IP on the TC as an alternative to bridge this actually works well but is a little more involved to setup..
    See. Re: airport time capsule keeps disconnecting

  • Time Capsule disappears from Wireless connections

    I use a Time capsule with a variety of wireless and wired Macs and have continous problems with the wireless Macs using time machine.   A reboot of the Time Capsule will fix the issue for a few days but then it will disappear when Time Machine tries to connect,   The wired machines have no problem and can always get connection to the Time Capsule wen Time Machine wants to backup.
    It appears to be an issue with the AFP server on the Time Capsule.  When connecting to the Time Capsule using "Go To Server" from finder, the wireless machines can always connect using smb, but when Time Machine is not working they fail to connect using afp.
    Has anyone else seen this behaviour.  Given I can always connect using smb, it does appear to be some form of software issue on the Time Capsule.  The
    Time Capsule is running the latest version of firmware 7.6.1 and the Macs are 10.8.2.   The issue has been the same since 10.7.

    Well decided the best approach is to use a script to reboot the Time Capsule on a regular basis.  Had to hack some previous scripts on the Web to get to work using AirPort Utility 5.6.
    tell application "AirPort Utility 5.6" to activate
    delay 2
    tell application "System Events"
              tell application process "AirPort Utility 5.6"
                        tell window "AirPort Utility 5.6"
      select row 2 in table 1 in scroll area 1
                                  delay 1
                                  click button "Manual Setup"
                                  delay 1
                        end tell
                        click menu item "Restart…" in menu "Base Station" in menu bar 1
      delay 1
                        tell window "AirPort Utility 5.6 - Robert Halliday's Time Capsule"
                                  click button "Continue" in sheet 1
                        end tell
              end tell
    end tell
    delay 10
    tell application "AirPort Utility 5.6" to quit
    Anyone more familiar with Applescript, improvements welcome.  The script does appear to have problem reliably performing the click on the menu.  It appears to work some of the time!?
    The along with a calendar event as will as a scheduled on/off using Energy Saver should allow for a regular reboot - giving the script works!

  • Local copy idisk folders added to sidebar disappear after restart

    Folders from a local idisk copy added to the finder sidebar continually disappear after restart. Any idea how to prevent this?

    a workaround:
    you can lock this file via command + i
    Library > Preferences > com.apple.sidebarlists.plist
    to keep your sidebar setting,
    then reboot
    or
    open Terminal and write:
    defaults write com.apple.finder QuitMenuItem 1 < this will add a Quit command to the Finder
    then:
    killall Finder
    Quit the Finder via Command + Q every time you mount iDisk...
    it works for me, use at your own risk

  • Time Capsule disappears from device list when wireless is toggled

    When I toggle wireless on and off, either via profile or Airport > Wireless, sometimes my base station disappears from the list of devices in Airport Utility:
    Has anyone else seen this? My Time Capsule reappears after I close and reopen Airport Utility.

    I may not be understanding what you mean but unless you have the TC connected via ethernet it will disappear when you turn airport off, it would come back up when you turn it on but it may take a few minutes.

  • After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

    Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

Maybe you are looking for

  • I want to create a report based on date ranges...

    I have surfed the forum and seen all of the responses and can't get anything to work. This is where I am: select     OBJECT_ID,      EVENT_CATEGORY,      EVENTS_TITLE,      EVENTS_DATE, OBJECT_ID "Click Icon For More Info"      from EVENTS where     

  • I cannot edit a converted Word document

    After I downloade a doument that was emailed to me......and converted it from PDF to Word .......can I edit that document ?

  • Network Flexibility, L2 or L3 access?

    My company operates a small mobile network that supports ~75 users. Our physical location is moved on a regular basis and the area that houses the users is modified with each relocation based off of available space and resources. Due to wiring requir

  • Tab control in sequence

    Hello,  I'm learning LabView and until I have started making applications I couldn't see how complicated it is.  I have tried to do VI to choosing in sequence some parameters. After many attempts to solve the problem, the VI it's working wrong all th

  • Update Contract End Date on Billing plan

    Help would be appreciated. We use milestone billings with fixed values based on date setbacks from the contract end date.  For example, 6 months prior to contract end or 12 months prior to contract end.  Once the 1st billing in the plan is processed