My time capsule mounts to Mac but is not displayed on Migration Assistant

My time capsule mounts to my Mac but is not displayed on Migration Assistant.
Very strange...there doesn't seem to be any issues with my Time Machine backup on time capsule, and I can easily access all files via Finder mounting the sparsebundle. However, when I try to fully restore the backup to my iMac, Migration Assistant cannot find any of the backups.
Any idea why?
Thanks!

Try preforming a factory reset and start over. This is explained at http://support.apple.com/kb/ht3728

Similar Messages

Just moved and Time Capsule shows green light but does not connect to internet?

Help! I just moved and am trying to set up my wifi network unsuccessfully. I know the Internet is working as I can get online if I plug the computer directly into the modem via Ethernet cable. I've tried disconnecting and powering down everything, reconnecting modem and Time Capsule, then turning on modem, Time Capsule, then computer, with several minutes in between. Now I have a green light on the Time Capsule but in AirPort Utility it shows and amber light for Internet and says the connection is "Disconnected".
All my software is up to date. What do you think???

Modem.. what modem.. what kind of internet??
Open the utility and check the TC wan address??
If it is cable modem it can take 15min or more for the IP to reset.
Is the cable modem also a router??

Time Capsule set up OK but will not print.

Time capsule originally set up with print cable to iMac. Now, I've moved print cable to Time Capsule, but cannot find way to get it to print. What is required to get Time Capsule to print with the print cable hooked up to the Time Capsule USB port?

I had this problem with my Time Machine drive very recently. I wasn't using a Time Capsule but it sounds exactly like my problem.
Time Machine would backup to my external drive with no problems but every time I wanted to go into the program, it would freeze. It would be fine in the current time, (when you first enter Time Machine) but if I tried to go back in time, the animation would happen, but I wouldn't be able to click on anything in the finder Window. The only way to get out of it was, as you said, to press Apple, Option and Escape.
The way I solved this was to use Disk Utility on my external drive. I had tried before but when I clicked on verify or repair disk it just sat there for ages doing nothing. What you need to do is select the Time Capsule drive in Disk Utility and then do a repair on it.
Warning though, it will take about an hour to complete. It took probably about 20 minutes for mine to even start repairing. But it does work, I did it on mine and now Time Machine is fully working again.
Hope this helps
Chris

Time Machine external drive not displayed in Migration Assistant

I have been suffering repeated lockups with my iMac, so I decided to bite the bullet and reformat the drive and restore from a Time Machine backup. I have been backing up to an external USB drive, not a Time Capsule. It seemed to be working fine and I have successfully restored the occasional file. However, having reinstalled Lion, the external drive was not offered as a possible source for restoration. Similarly, having chosen not to restore during reinstallation, I attempted to use the Migration Assistant: once again the external drive was not offered as a source. Luckily, I also had an up-to-date cloned drive that was offered and I managed a successful restore.
Can anyone explain why the external drive was not available as a legitimate source? Must I always use a Time Capsule for a full recovery?

It seems that
in order for Mac OS X to realize that it's a Time Machine drive, there should be an invisible "flag file" (0 bytes in size) at the root of the drive, called com.apple.timemachine.supported - if this file is missing for some reason, Migration Assistant won't pick it up.
not sure that it's true but worth trying.

Data transfer from Time Capsule to new Mac

I have a MBP which up until 7 days ago had Mountain Lion on it. The week before that, i had major abdominal surgery and when i was in the hospital, i accidentally knocked a bottle of water over and it fried my MBP. I would not turn on after that.
I took the MBP to the Apple Store for it to be repaired, at a cost of about $800. Meanwhile, i bought a new MBP. Both computers are the same with 2.5Ghz intel processor Core i5. As far as i know, the only difference is that the newer one has a 500GB HD and the older one has a 1 TB HD, and the older one ran Mountain Lion while the new one came with Mavericks.
I had the older computer backed up on a Time Capsule. When i got the newer one, i turned it on and went through the set up process. When asked at the beginning if i wanted to transfer stuff over from another computer or drive, i said 'ask me later' or something like that. I have never used Migration Assistant before and did not understand it well enough to use it.
I transferred the backed up data on Time Capsule to the new computer wirelessly. It worked fine. When i got done,
the hard drive looked like the old one, same set, same files on the desk top, dock arranged the same way, same Safari bookmarks, and also, the same third party
programs and data, with one exception, but for the most part it was the same.
Since i set up the new computer, it has been having regular back ups onto Time Capsule.
Now, i have the older computer back, repaired. The older computer no longer has Mountain Lion. It has Mavericks OS 10.8.5. The newer computer has OS 10.9.3.
I want to do the same thing i did a week ago in order to transfer the data to the older now repaired computer, but i can't remember what i did, i'd never transferred data from Time Capsule before. I have not been in the best shape mentally, having been cut open with a 10 inch incision and pain pills.
All i know is that whatever i did, it was very easy, i believe i used Time Machine to do it, and it transferred my third party programs with their data. It did NOT involve using Migration Assistant.
I don't plan on using the newer computer. i plan to go back to using the older one which has the larger hard drive.
Both computers have the same user account names and login info. I just want to replace what is currently on the older freshly repaired MBP with what is on the Time Capsule.
I am not sure if my question is very clear but i'm wondering if anyone can tell me how i can transfer the data from my Time Capsule to my older now repaired MBP without using Migration Assistant (which i think would not transfer my 3rd party stuff). i just want to do what i did a week ago but can't remember what i did. I think i used Time Machine, i connected the computer and Time Capsule (or they were already connected wirelessly).
I did NOT choose Enter Time Machine. I think i went in to Time Machine Preferences and clicked on 'Select Disk.' I think i selected a disk that has the name of my Airport connection and has the word Data on it. Does that sound possible?
Does anyone know what i'm talking about from experience or other knowledge? because i'm inexperienced with this process and am not very clear about what happened, but i know it didn't involve Migration Assistant and it didn't involve Time Machine > Enter Time Machine, because i have never seen those before today.
Whatever i did, it was so easy, just click on the disk i wanted to transfer data from and click some button that meant "ok" or "connect" or "transfer." And then, just wait, and after some time, my computer was set up reflecting the back up from Time Capsule, including third party stuff.
Thanks for any help with this.
btw, in Time Machine now, under Select Disk > Back up disks, there are two boxes. The first box says Backup Disks, and in that box is the name of my Airport connection, i.e. the Time Capsule i guess, and on the icon, it says Data. In the second box, it says Available Disks, and in that box, it has an icon of a disk with the name of my Airport or Time Capsule and it has an icon of a Wifi symbol which has the name, Other Time Capsule. Apparently that is an option to set up another Time Capsule not listed. I wonder if i chose one of those icons and clicked "Use Disk", would that data be transferred to my now repaired computer?

(Sorry, after i posted this, i discovered it posted it in the wrong product forum, i guess when i typed in what i was interested in, it just took me to the Snow Leopard forum. i don't see a way to delete my post. Maybe the answer will be the same?)

Can I use my time capsule for back up only and not as a router?

I have been trying to set up my time capsule as a router but have not been successful, the dsl I am using is not responding. Can I just use my time capsule as a back up device and not as a router? if so how can I do this?

Yes, you can. Simply plug the TC via Ethernet into the current router and set it up in bridge mode.

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

Time capsule produces a signal, but won't connect or backup

I have looked at some of the other discussions here; some are similar, but I can't find an answer.
I have a TC, Macbook Pro and an iPhone 4, all between 6-10 months old. My problems started when I turned on all my stuff after being away for 4 weeks over the summer.
My Macbook pro's AirPort recognises the TC - I have a 'full signal' reading at the top of the page. However, when I try and connect to the internet, I'm told it can't connect to the server. If I just keep trying, re-entering addresses (from the scroll-down bar, so always exactly the same), it eventually connects and I have a great connection, which I can use to watch movies/download stuff no problem. Why is it so **** illogical? Why does it connect on the 20th attempt, and not on the first? This happens however long the computer has been on, and regardless of when I last connected to the internet.
The biggest problem is that I have a Vodafone 'Sure Signal' signal booster attached to the TC. Without it, I get no phone signal. The Sure Signal does not recognise the signal from the TC at all. I have done factory resets on both - individually and together, and nothing has changed. I have turned the Sure Signal off, but the TC still doesn't work properly.
My iPhone won't connect either. It too shows a 'full signal', but when I try and connect it says connected/not connected alternately about every 1 second.
The TC is connected to the internet via a cable from my landlord's router, next door. They have perfect signal. They also have a signal booster in their house, which used to interfere with my TC (when it worked). I changed the channel on my TC, and now, when it connects, there is no interference.
Please can someone enlighten me - I have worked though every thing I can, and I can't go any further because I can't see any logic to the problem.
** Since these problems have started, the TC has not backed anything up - I can't get it to back up, whatever I've tried.
** Each time I have re-made my network, when I open Airport Utility, it says 'no wireless devices recognised', and I have to re-start the TC in order to be able to do anything to it.

Try changing the Firewall setting:
mDNSResponder - Allow incoming connections
Background:
My Time Capsule was working perfectly in Leopard.
When I upgraded to Slow Leopard, Airport Utility was no longer able to see the Time Capsule - although my Mac (MBP) was still able to connect to the wireless network and out onto the Internet.
The next day or so I upgraded to Lion (Snow Leopard was only installed to get App store) - the situation remained the same.
From another Mac (MB - still running Leopard) Airport Utility was still able to connect to Time Capsule.
I edited the firewall settings on my Lion MBP:
The mDNSResponder was set to "Block incoming connections".
I changed this to "Allow incoming connections".
Airport Utility was then was then able to see the Time Capsule (I can't recall now if I needed a reboot after changing this).
HTH.

When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

ilw-00 wrote:
How can I do this? How can I find the sparesbundle? What is the best way to mount the time capsule internal disk?
Open a Finder window. If you see your Time Capsule in the "Shared" section of the sidebar, clicking on it should show the "Data" volume (or whatever you named it) in the main part of the window. Double-click on it to mount the "Data" volume.
If you don't see your Time Capsule in the Finder sidebar, you may not have enabled "disk sharing" in AirPort Utility. In AirPort Utility do a "manual setup of your Time Capsule, then select the Disks panel, then the "File Sharing" tab, then check "Enable file sharing", select a security method (I use "With a disk password"), fill in the remaining options as desired, then update the Time Capsule. Once it restarts, try again to see your Time Capsule in the Finder's sidebar.

Can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

Yes, but it will be slow and expensive compared to just buying an external and plugging it in locally.

Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

The USB drive must be formatted for Mac in Mac OS Extended (Journaled), or if you want to use both Mac and Windows files, the drive can be formatted in FAT32.
A number of drives are formatted for Windows only in a format called NTFS. This willl not work on the Time Capsule.
In addition, the USB port on the Time Capsule is under powered. You almost always have to use a powered USB hub when you connect a drive to the Time Capsule...even if the drive has its own power supply.

How do you access files on your time capsule from your mac?

how do you access files on your time capsule from your mac?

i had an old macbook pro that i had all the pictures on and i backed it up to my time capsule through time machine. i got a new macbook pro retina display recently and im wanting to see if i can get some of the pictures off of my time capsule now but i dont want all of them.

Can you use time capsule for your mac and have readynas backup your pc's on the same network

Can you use time capsule for your mac and use readynas to back up your pc's on the same network

Sure, that is trivial setup.. they both have different names and IP addresses.
You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

Airport time capsule with a mac mini

so can i use airport time capsule with a mac mini

What do you want to do with it??
The TC is designed as a network target for TM on any Mac computer.. so of course it will work with a mini.
It is also a standard wireless router for a network.. that will work on any network client device..
It is NOT designed as a NAS.. ie network storage.. I recommend people not use it for that purpose. But people can do stuff that I don't recommend.
Good luck when the TC dies and their files are all lost.
Did you want to do something different to the norm??

Time capsule (2T) and Mac Mini issue

I bought Time Capsule (2T model) recently and replaced existing router and probelm beginning.
I have several Window based PC and Apple TV, Ipod and one Mac Mini and HP D7460 printer.
Window based PCs are working fine, haven't tested Apple TV but Ipod is working fine too.
However, my Mac Mini is loosing connection with Time Capsule intermittently. Can't use internet due to the issue. I installed iStumbler and looks there are two notes I can find from time capsule and one has 2457 frequency but the other one has -1 frequency. But my Mac Mini's airport can't search any wireless router. If you reboot and wait around 30 min, it suddenly found my Time Capsule and star working but stop working after 30 or 40 min later sometimes, 5-10 min later....
Any recommendation? DON"T understand why Mac Mini has issue while Windows PC are working properly...

What wireless mode are you using? G, G/N, N
Is the Mac mini N or G and is the PC N or G?

My time capsule mounts to Mac but is not displayed on Migration Assistant

Similar Messages

Maybe you are looking for