My time capsule sparsebundle says error message resource temporally unavailable since I updated my software, Im currently using OS 10.7.5
I did the update when the new update for my Iphone to 7.0.2 came out, so I runed my MacBook Pro software update and updated it, since that day my back ups started in another folder, the space on my time capsule is still taken but I can't acces the old back ups, I have read several forums and followed all the instructions to get to previous backups and it just has been imposible, my back ups are done wireless and they should be under the sparsebundle file that appears on finder when I select my time capsule displays the mesage Resourse Temporarly
I did the update when the new 7.0.2 update for my Iphone came out, so I ran my MacBook Pro software update as well and updated it, since that day my back ups started in another folder, the space on my time capsule is still taken but I can't acces the old back ups, I have read several forums and followed all the instructions to get to previous backups and it just has been imposible, my back ups are done wireless and they should be under the sparsebundle file that appears on finder when I select my time capsule displays the mesage Resourse Temporarly Unavailable
Thank you !!
Similar Messages
-
TS3274 Error message 5000 received when trying to update ipad software
How do I resolve this error message 5000 received when trying to update ipad software from my computer?
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I keep getting error messages on the calendar since I downloaded the new software on my IPAD2. When I try to add a new event it either says "That event does not belong to that event store" or it says "the calendar has not been set". Does anyone know what these messages mean or how to address this?
I'm getting the same issue on my ipad2...I set up a new calender and now I keep getting this error message....how do I fix this?
-
Airport time capsule not found error message
HI,
My time capsule is blinking orange.
I open aiport, sometimes airport finds the TC, sometimes not.
When not, get message:
"airport time capsule not found"
When TC is found, aiport utitily shows an error with the extended network I am setting up. I press 'edit', the settings all seem good. Re-type passwords etc and update.
The problem remains.
I have updated the firmware. An apple shop near me has reset TC using the recessed button on back of TC, and then I have re-configured at home.
BTW, TC was working fine in my old house with same laptop, so prob not simply a basic user issue...
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
Any thoughts out there?
HOpe so!
manayes, running airport 6.1, OS 10.7.5
OK.. I failed to ask enough questions.. I think your comment it all used to work threw me.
1. You are trying to extend wireless network of what router. This will only work with another Apple router.. the way apple built it is in the family only. So please spell out what is the primary router??
If you did have it working to extend the wireless of a non-apple router in your previous house I simply don't know how.. according to Apple it isn't possible. You can use WDS.. that is slow and reduces everything to G wireless.. that is the only way.
2. When you say in the first post..
4 other devices on my wifi network all have reliable connection, visitors' phones and laptops too, so shouln't be a wifi netowrk issue, ie network outside TC.
I presume if you turn off the TC, these devices still have wireless network because they are connected to the primary router.. not the TC.. again my bad reading.. I assumed they are connected to the TC.
So please spell out the whole network..
Broadband modem.. type, model, make.
Main router.. type model make
Any other network devices.
And how was it setup in your old place and how is it different now. -
When trying to download and update the operating system software for my iPad and iPod I get the following message - "ERROR MESSAGE" There was a problem downloading the software for the iPad "Mikki's iPad". The network connection timed out. Make sure your network settings are correct and your network connection is active, or try again. later." Is this a setting on my computer - my network is working fine. I didn't have any trouble before but have just started having trouble. Please help...
Hi Robertfrom Denver.
Did you try the solution given, and if yes, did it work?
I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
HelenfromBroughton Astley -
When back up to time capsule I get the message no access to backupcopyfiledisc/Volume/Data/Terjesumac.sparsebundle ( error-1)
Try #C17 in Time Machine - Troubleshooting for known fixes. Works for me as well.
http://pondini.org/TM/Troubleshooting.html -
I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?
Quit iTunes, restart your computer, reset the iPad and try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Help !
The last few days my time capsule reports an error The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
To make things worse I seem to be loosing my screen so need to make a back up ASAPMake sure that no other Macs are backing up at the time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
I am trying to improve the performance of my Time Machine backup and retrievals via my 2nd Gen. Time Capsule from my iMac Core 2 Duo hard drive with SL 10.6.8. The incremental backups generally take 20 - 40 minutes each hour generally with fewer than 100 MB of data being backed up. I have read through numerous threads on these forums about Time Capsule and Time Machine issues as well as the very helpful Pondini site (http://web.me.com/pondini/Time_Machine/Home.html) and have tried many other suggestions (listed below), but have been unable to attempt a Disk Utility repair disk on the Time Capsule sparsebundle file.
After locating the sparsebundle 'file' in the finder under Shared/TC/Data, I am only sometimes able to drag the sparsebundle into the Disk Utility volumes and disk window. About fifty percent of the time, Disk Utility hangs when attempting to drag in the sparsebundle. If I am able to get it listed and click on "repair disk", then the beach ball begins to spin and nothing happens. This occurs whether or not I first use AirPort Utility to "Disconnect All Users" from the Time Capsule. I have given it over one hour to attempt the repair disk, but nothing happens, i.e., not a single message shows up in the detail window. The beach ball just spins, and Disk Utility shows up in red as "not responding" under the Force Quit menu.
Also note that on my new Macbook Air, Time Machine runs quite quickly via this same Time Capsule from my new Macbook Air using OS X Lion (which seems to indicate that the Time Capsule drive itself is OK).
I would appreciate any tips on getting Disk Utility to run "repair disk" on my sparsebundle, as I seem to have exhausted most other options (see below) for improving Time Capsule performance -- aside of course, from wiping the Time Capsule clean and starting all over.... (which I really don't want to do, and from what I've read, has not helped some people who've tried this anyway).
Many thanks!
Although I would like to focus this thread on the Disk Utility / sparsebundle "Repair Disk" problem, I should mention that I have tried the following other things:
1. Repaired disk permissions on my hard drive
2. Used Disk Utility to run "repair disk" on my hard drive after starting up from a SuperDuper external backup
3. Run DiskWarrior on my hard drive, again, from a separate startup disk
4. Did the "full reset of Time Machine", a la Pondini Troubleshooting #A4
5. Changed my computer and Time Capsule names to simple short names with only alphanumeric characters and no spaces
6. Ensured that my Time Capsule is being accessed only via ethernet
7. Relaunched the finder
8. And finally, attempting to use Disk Utility to repair the sparsebundle - thus the nature of this postOK, no takers out there, but I answered my own question (sort of).
The answer is that even though Disk Utility shows up as "not responding" under the Force Quit menu and appears to hang, it is actually still working. A bit of patience shows that after about an hour, my Disk Utility was able to show the 1.44 TB Time Machine sparsebundle from Time Capsule in the disk window on the left hand side. Once this appeared, I was able to click on "Repair Disk" (note that prior to doing this, I had to "Disconnect All Users" from my Time Capsule using the Airport Utility program; otherwise you will get a "could not unmount disk" error). Again, the Repair Disk function appeared to hang Disk Utility as it showed up as "not responding" under the Force Quit menu. However, after about 8 hours, Disk Utility did run the entire Repair Disk protocol on the sparsebundle. The results DO NOT show up in the Disk Utility details window - so even if you are patient enough to let it complete, you will not see anything and may think that nothing happened. However, you can find the familiar results of the Repair Disk function by looking on Console - find the "DiskUtility.log" under Files: ˜/Library/Logs.
Unfortunately, I was hoping to find a problem that would have been subsequently repaired which would result in dramatically increased Time Capsule speed, but this was not the case. Disk Utility showed everything to be "OK" and I am stuck with a very slow Time Capsule....
(And of note, my new Macbook Air (OS Lion) Time Machine functions blazingly fast on both backup and retrieval to and from the very same Time Capsule - even though, these are occuring wirelessly via AirPort -- granted the size of this sparsebundle is an order of magnitude smaller at this point, i.e., only 10 GB right now)
Would still be happy to hear of any similar experiences or tips on getting Time Capsule to work more quickly. -
HT1218 Time Capsule is showing error code -6584)
My Time Capsule is showing error code - "An unexpected error occurred (error code -6584)"; can someone tell me what this means? Correlated, Time Machine does not show any backed up data although it says that ~400 GB out of 1 TB is remaining.
On the More Like This.. see the various very common complaints.. just to the right >>>
First one is good.. anything Pondini responds to listen. https://discussions.apple.com/message/17748380#17748380
A simple reboot of the whole network.. from off.. modem .. router/TC.. clients.. 2min gap will probably fix it.
If it keeps happening, tell us your OS. (Most likely Mountain Lion.. which has networking ability of wet string and a pair of tin cans). -
Error message "resource does not exist"
C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???
hey guys just updating you all.. i wrote previously how my ovi store wasn't working, it gave me an error message 'resource does not exist'. i did soft/hard reset, also uninstalled ovi store and reinstalled STILL it wasn't working. It lasted a day. And today it's working fine. i think it was a problem with their server. It sorted it self out
But guys i did contact the team, and i got a reply that said i should do the following if it still doesn't work:
1. GO TO MENU
2. GO TO INTERNET
3. CLICK ON WEB
4.GO TO OPTIONS
5. GO TO CLEAR PRIVACY DATA
6. DELETE CATCHE AND COOKIES
That should apperantly work.
If not guys, then i wouldn't worry. Just like mines, yours should sort it self out -
Having trouble with Face Time app, get following error messages
Since having a new hard drive installed in computer my Face Time account no longer works. Everytime i try and sign into my Face Time account= get following error message
"the server encountered an error processing registration. Please try again later.
= when try and install the app from mac store error message says
"A newer version of this app is already installed on this computer
If you want to replace it with this version, move the existing app to the trash.
BUT WHEN TRY TO DELETE APP ON COMPUTUER (AS IT IS NOT WORKING)
Get following error message " Face Time.app" can't be modified or deleted because it is required by Mac OS X.
have MacBook Pro
mountain Lion
Software OS X 10.8.3
Hope you can assist, best wishes GGThis could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Reset the NVRAM.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
According to one anecdotal report, Flash Player may interfere with iMessage, though I don't know how and can't confirm. To test this theory, select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane. If this action solves the problem, please post your results.
Step 10
Boot into Recovery and reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars
You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
Help[ with hp printer 4215 all-in-one.
I can not print anything because I am told my printer is not listed on devices. help please I am S with a very limited income
-
my ipod nano just stopped working right after playing a song, any suggestions to get it back working?
-
Restoring photo resolution back to original size on iphoto '11
I transferred photos from old IMAC to new one and some of the photos have very small resolution and I cannot edit in Aperture. How to restore to origina res
-
Printer Jobs Stop Immediately OS 10.4.11
I have a new Epson 710 all-in-one printer, which replaced my Epson Stylus Photo R200 that worked fine with same setup. Although it did print when I first set it up, jobs now immediately stop (with red exclamation mark on utility icon), if I start the
-
How can I register an EVENT for ALV-GRID?????
Hi, i have create Events for my ALV-Grid Table (cl_gui_alv_grid). But there is one Problem!!!! Which Event must i create, if users write something in the ALV row and press to key "enter" ??? With kind regards Ersin