My time capsule wi-fi seems to become inactive for an hour or two in the mornings? on MBP and iphone? any ideas ?
My time capsule works without any problems , most of the time..... seems around 7-8 am the wifi connection doesn't work. its hooked up to my AT&T Uverse router. it isn't a lion issue ( I am running lion on MBP) because I also see it on my iPhone 4s. any ideas of what could cause this ?
What is the network layout?
The Uverse router is also wireless? Is that turned off or bridged?
The TC is bridged or running as the main router? Is the only wireless AP the TC?
Does the airport actually get an IP address from the TC?
If so,
Open a terminal in the computer and ping the TC, and ping the Uverse modem/router.
Ping the outside world address by name and by IP.
Tell me the results of all of that.
If you want to try and jump to a solution.. try setting fixed channels on the TC.. short names for wireless, no spaces, no special characters. pure alphanumeric. What does that achieve?
Similar Messages
-
My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?
You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location. -
Can I use the time capsule as just an external hard drive for music or does it have to be used soley as a back up? I'm thinking for music and photos
Nickles96 wrote:
Hello friends.. I have a similar question, in that I would like to purchase the 2TB TC for use as a NAS device, in addition to taking advantage of the Air Port extreme.. Then I could dump my Linksys router.
I was originally looking at a Synology NAS solution, but the TC seems like it can meet my needs.
I have a Synology NAS as well as the Time Capsule. If you look at the 3.2 beta program, the Synology actually attempts to replicate TC functionality in that you can use it with Time Machine on your Mac.
I must say, Airport on the TC is definitely a nice feature!
Nickles96 wrote:
In addition to the obvious feature of the backup, can I indeed also use the TC as a NAS drive to access from remote locations (example from the office)?
I'm surprised more people aren't using the TC as a dedicated NAS deviced.. I've searched high and low on forums around the web, and don't seem to see many people trying to use it as I've outlined.
I can't see why this wouldn't fufill my needs, and take the place of a separate NAS solution (like the Synology, or iOmega, Seagate, etc....)
Has anyone used this TC as such?
Yes, you can do this and it's something I've been trying to do, but I'm currently having issues. I have another thread stating I consistently get "connection failed" messages. I'm basically storing my music/photo/video files on the TC and keeping my Mac hard drive fairly lean. In terms of NAS functionality, the TC is very basic. Synology/QNAP and others have a lot more features so don't rule them out. -
Since having my MacBook Pro repaired (for a video problem) Time Capsule returns the following message: "This backup is too large for the backup disk. The backup requires 428.08 GB but only 192.14 GB are available."
I notice that there is also a new sparse bundle.
Since TC has my ONLY backup (going back about 4 years) I am reluctant to wipe it and start over fresh as I am afraid of losing files.
Is there a way of dealing with this?
I am using Snow Leopard 10.6.8The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you. -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.
Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
-
How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!
I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two. -
I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?
If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html -
I have a Airport Time Capsule 2T, I would like to know if it is possible to backup all my apple divides (iMac, iPhone and iPad)?
The iMac can back up to the Time Capsule, but iOS devices like the iPhone and iPad back up to either iTunes on your Mac....or....to iCloud.
If the iPhone and iPad back up to iTunes on your Mac, then when the iMac backs up the iOS backups are sent to the Time Capsule as well. So, the iPhone and iPad back up indirectly to the Time Capsule.
The iPhone and iPad cannot back up directly to the Time Capsule.
For more information on iOS backups, see this Apple support document:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support -
What if my error message is the following: The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)
This is a complex procedure.
Pull the power cord from the back of the Time Capsule
Wait a minute or two
Plug the power cord back in to the back of the Time Capsule
This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
The Backup disk image ... sparsebundle ... is already in use. -
Use Time Capsule as a Hard Drive via Ethernet for Time Machine
Hi Folks
To summarise a very very long story here goes;
- About 12 months ago my father in law buys a Time Capsule without really knowing what it is for and how it works (I know don't ask!!!!!)
- I set it up for him connected to his wireless router so he uses his router to access the internet and uses the Time Capsule to back up his iMac via wireless with Time Machine. (from what I can see he could have saved himself some cash and just bought an external Hard Drive and connect it via USB to the iMac for Time Machine, but never mind. He has 1 iMac and no other Mac's in the household. His printer is connected to his iMac via USB in the same room and he uses a wireless router to access the internet, since the phone point is in another room)
- All is well until Monday when he tells me he cannot access the internet. After much much trial and error I have eventually managed to get his internet back up and running, but he has somehow managed to erase his Time Capsule.
- I set his Time Capsule back up as it was previously and it starts performing the initial backup again. However at the rate its taking I think it will take well in excess of 24hrs to do that initial
backup. Also so far It has failed 3 times during this initial backup and I get an error message stating it's failed. The setup guide makes reference to performing the initial backup via ethernet as it's quicker.
I'm thinking the best way forward would be to just plug the Time Capsule into the iMac via ethernet and use it purely as a Hard Drive for use with Time Machine. I've tried just plugging in the ethernet cable from the Time Capsule to the iMac, but it doesn't recognise it. Bear in mind that it currently works via wireless, do I need to perform some sort of factory reset or how do I go about telling the the iMac to no longer use the Time Capsule wireless, but just connect via ethernet instead.
Of course I could just forget about the Time Capsule all together and tell him to get a 500gb USB External Hard Drive, plug that in and set up Time Machine with that instead.
Am I missing the point here and can the Time Capsule do a lot more for him, given his current setup.
ThanksThat is true but if you mix your files with the Time Machine backups, Time Machine will have trouble contril disk space when it gets low.
If you are going to do that it is recommended that you partition the drive. Since Time Capsule is not able to partition the drive that means you will have to remove it in order to partition it.
A simple solution IMO is to get another external drive and hang it on the USB bus in the Time Capasule.
Allan -
Thinking of purchasing Time Capsule.... Can I access my documents saved on (Home Network) Time Capsule from another Network??? For instance, I can access my documents saved on MyBookLive (which is connected to my wifi) from ANY wifi connection... Like when I'm at school I can download documents stored on my MyBookLive at home.... I love this feature... But I would prefer to keep my products apple... So my question is can I access my documents from ANYWHERE with Time Capsule???
Other products I have: MacBook (2009 limited edition it's aluminum) two iPad2 (2012) iPhone 5 (2012) two iphone4 iPod touch (2010) iPod Nano (2011)Remote access to TC is allowed by BTMM and iCloud service.
Not for ipad or iphone.. only the Macbook although I think people have some work arounds..
NOTE. Your school firewall should block it. If I was still working in network admin I would. ie you are risking the whole network to get access to files unchecked for viruses.. and please don't just say Macs don't get viruses, you can still be the source of the infection even if you don't suffer the disease. Just a carrier.
http://support.apple.com/kb/HT3486 -
I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!
guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away. -
Hi, no matter what setting I change, I am having the same problem.
I invite people to an event I create on iCal, but in the invitation message received the invitees, the event seems to be scheduled for one hour earlier. E.g, I create the event for 14:00 GMT, yet the invitation message says 13:00 GMT. We are in the same time zone with the other people receiving the message. And I have my iCal settings as well as iCloud settings set to GMT.
Can you please help me? I'm really frustrated!What exactly are you doing and what version are you using with OS X 10.8?
Maybe you are looking for
-
Issues with iTunes 11.1.5 and Windows 8.1
I recently upgraded my iTunes to 11.1.5 on my Windows 8.1 computer, since the upgrade iTunes has become unusable. Before the upgrade I had an occasional error, device not recognized or a download error, sometimes i had to unplug and then plug
-
Ipod not recognised - tried absolutely everything
My ipod is not recognised by windows or itunes when I connect it via the USB cable to my PC. If the ipod is off upon connecting it will turn on but will not change to the 'do not disconnect' screen and doesn't appear in my computer. The socket theref
-
Hi i am trying to propagate message from a queue in 8i database to a queue in 9i database.The problem is that i can see the message being enqueued in 8i database but the 9i queue is always empty.Is there any problem with propagation.How can i check i
-
MS SQL Server Indexed View in Data Modeler
Hi All, I'm fairly new to Data Modeler. Tried to search the forums for this but couldn't find anything. I'm trying to figure out how to create (in a SQL Server 2008 physical model) a view with a clustered index in Data Modeler v. 3.3. Seems like it i
-
Is it possible to call a mac (ichat) from an itouch (4th generation)?
Is it possible for an itouch to facetime with ichat on a mac? On the information regarding facetime it appears that it only works with other itouches and iphone 4s. I don't see why I shouldn't be able to call a mac.