My Time Capsule will no longer Backup

I've had an issue with my Apple Time Capsule. It stopped backing up as of December 1st. I get this when I attempt a back up: The back up disk image "/Volumes/Data/MacBook Pro.sparsebundle" could not be accessed (error (null)). Does anyone know what caused this, and how I go about fixing it. The Time Capsule is the previous generation 2TB model.

Are you on Mavericks?
What OS is the computer running?
Reboot the TC is often enough to fix it.
The error is equal to C17 here.
http://pondini.org/TM/Troubleshooting.html

Similar Messages

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • After having the logic board replaced, Time Machine will no longer backup my computer to the same backup files as before.

    After having the logic board replaced due to bad NVidia chip, my Time Machine will no longer backup my computer to the current backup. Is there a way to reset something to get Time Machine to continue to use the same backup files as before for this laptop?

    As far as TM is concerned you have a new computer, so it will make a new backup. If you don't have the space for both backups then erase your backup drive before backing up the computer.

  • My Time Capsule will no longer allow new devices to join my WEP protected network?  Any thoughts?

    I recently reset my password on my home networks.   I use a Time Casule for the wireless router.  My computers and iPad connect fine, but I can no longer get my Nintendo Wii or my new iPhone to connect.  The error message I receive on the devices when I type in the network password is "Device cannot connect to network."  I am sure the password is correct.
    Anyone know the issue here?
    alex

    System Preferences -------> Time Machine
    Select the correct disk you want to back up to (new device), click on the old disk in Time Machine preferences,    ----------> Remove Disk

  • Time capsule and deleting old backups

    Hi after performing a recent backup to an external drive I don't have much space left on the disk. It says that time capsule will delete old backups. Does this mean that any movies backed up in these early back ups will be deleted as I no longer have them on my MacBook due to the amount of space they take up?

    Time Machine is not an archive, it is a rolling backup.
    If you want to keep files permanently, you must not store them only in Time Machine. If you don't have space for the movies on your main drive, buy a drive to use as an archive, put those movies on it, and make sure that disk is backed up too, since if data exists in only one place it is vulnerable.
    My family digital archive doesn't fit on my internal drive so it is on an external drive. I also maintain two exact backup copies of that external drive. One is in the fire safe at home, the other is in a safe deposit box, and those two backups are rotated periodically. If the original and the backup are lost due to fire, burglary, etc., the off-site backup means there is still a safe copy somewhere. Because I can't afford to lose those photos, movies, and financial records. Online backup is another option for making sure you won't ever lose data you need to keep.

  • After formatting my HD and eventually restore my system from a backup on Time Capsule, will I still have access to my old backups as normally used to do via Time Machine?

    I have a Time Capsule (4th Gen) and my backups on it, I need to completely erase my hard drive. My question is: after formatting my MacBook HD and eventually restore my system (OS X 10.6.8) from a backup on Time Capsule, will I still have access to my old* backups as normally used to do via Time Machine?
    *(-and to the newer backups- if I had not restored my system from the last backup).
    THANKS

    That's a good question. Technically, Time Machine should make a new backup but not erase any old backups. But if there isn't sufficient space on the backup drive, then I'm not sure if Time Machine will simply warn you or just go ahead and remove old backups to make room for the new ones.
    In any case, the new backup should have a different backup folder on the backup drive. That's my understanding. You can learn more at pondini.org.

  • First timer.  Just installed Time Capsule.  The first backup looks like it will take two days at the pressent speed.  Can I close MacBook Pro and have first back up  continue, and can I unplug and plug in at work without affecting the backup?

    I'm a first timer on this (or any) help site. I just installed Time Capsule.  The first backup looks like it will take two days at the present speed.  Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?

    Hi Oneinspirit,
    Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
    Start a backup: Click the Time Machine icon  in the menu bar, then choose Back Up Now.
    Pause a backup: Click the Time Machine icon  in the menu bar, then choose Stop Backing Up.
    OS X Yosemite: Start, pause, and resume a Time Machine backup
    http://support.apple.com/kb/PH18851
    All my best,
    Allen

  • New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup.

    New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup. The TC will not allow me to delete or start a new backup disk. My 2024 MacBook Air did the same yesterday but today it backs up.

    Seems to be working now. I left the MacBook on all morning trying to back up and now works.

  • Time Capsule Icon No Longer Appears on Desktop

    Two weeks ago I had AT&T U-verse cable, internet, & phone installed. As part of that installation they installed an AT&T router/wireless combination. The ethernet cable that was previously connected to Time Capsule is now connected to the AT&T device. There is no longer any ethernet connection to Time Capsule. The Time Capsule icon still appeared on my desktop and I manually performed back-ups from my Windows applications to Time Capsule. Time Capsule went from displaying a constant green light to displaying a flashing yellow light. That worked for several days. After about a week of that there appeared on my screen a 'wizard' of some sort recognizing the status of Time Capsule. It said this 'wizard' would eliminate the flashing yellow light. I followed the steps through the 'wizard' and at one point the flashing yellow light turned to constant green. There were a few more steps in the 'wizard' and when it was finished the flashing yellow light reappeared. The next time I tried saving files from Windows I could not connect to my w: drive, and the Time Capsule icon no longer appeared on my Mac desktop. I went into Airport Utilities and there is a box checked that should display the icon properly. Any ideas what's happening? How do I restore Time Capsule so I can back-up my files. Thank you.

    Welcome to the discussions!
    I don't have 10.6.1 yet, but have noticed this happens very occasionally on my MacBook Pro, but not on my iMac. Simply resetting Time Machine on my laptop has done the trick.
    Open System Preferences
    Click on Time Machine
    Click your Time Capsule to highlight it
    Click Use for Backups
    If that does not do it then delete the "com.apple.TimeMachine.plist" file. It's located as follows:
    Macintosh HD > Library > Preferences
    Restart your computer
    Then perform the same steps as above to setup Time Machine again.
    The resets will not affect any of your backups.

  • Time Machine/Time Capsule : Dual Computer Use/Backup deletion

    I currently use Time Machine and a 1Tb Time Capsule to backup my iMac.
    My Time capsule was 'partitioned' as follows by creating .dmg image files -
    350Gb - My Music
    250Gb - Other Stuff
    leaving 400Gb free for Time Machine backups.
    Only 50Gb of backup space now remains, after which I presume Time Machine should automatically begin to delete older backups.
    I am about to acquire a new Macbook Pro which I would like to also backup wirlessly to the same Time Capsule.
    Questions -
    - Do I have to manually free up enough space to enable Macbook Pro to create at least an initial backup?
    - How will Time capsule then 'share' the backup space available between the two computers?
    - Would it be wise to delete (if so, how?) all incremental backups of my iMac so that I'm at least starting both computers from initial backup status.(could delete everything,but initial backup did take a long time).
    Any advice much appreciated - thanks in advance

    Please ignore this post - I was unable to login as my normal user at the time.
    Same question now posted under my correct account

  • Time Capsule/ Endless Preparing - no backup

    I've seen similar threads and I believe that I've tried all of their fixes.
    I'm seeing the following errors in the console:
    Aug 7 10:30:34 HomeMac /System/Library/CoreServices/backupd[191]: Waiting for index to be ready (909 > 0)
    Aug 7 10:30:34 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8)(E rror) IndexCI in ContentIndexOpenBulk:No index
    Aug 7 10:30:34 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8
    Aug 7 10:30:34 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/FB0AF823-52BC-455D-9BE4-5267CC68CEB9)(E rror) IndexCI in openindexfile:bad file size: 16, min size 4096, 0.indexHead
    Aug 7 10:30:34 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/FB0AF823-52BC-455D-9BE4-5267CC68CEB9)(E rror) IndexCI in ContentIndexOpenBulk:0.indexHead invalid, will try to recover
    Aug 7 10:31:00 HomeMac com.apple.launchd[1] (0x109db0.cron[397]): Could not setup Mach task special port 9: (os/kern) no access
    Aug 7 10:31:04 HomeMac /System/Library/CoreServices/backupd[191]: Waiting for index to be ready (909 > 0)
    Aug 7 10:31:04 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8)(E rror) IndexCI in ContentIndexOpenBulk:No index
    Aug 7 10:31:04 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/F9F6764C-F1D9-46D4-804E-4CFDC556F1E8
    Aug 7 10:31:04 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/FB0AF823-52BC-455D-9BE4-5267CC68CEB9)(E rror) IndexCI in openindexfile:bad file size: 16, min size 4096, 0.indexHead
    Aug 7 10:31:04 HomeMac mds[33]: (/Volumes/Backup of HomeMac/.Spotlight-V100/Store-V1/Stores/FB0AF823-52BC-455D-9BE4-5267CC68CEB9)(E rror) IndexCI in ContentIndexOpenBulk:0.indexHead invalid, will try to recover
    Things that I've tried:
    - Erase disk both with "quick" and "zero out" options.
    - Restore defaults
    - Roll back firmware to 7.4.1
    - changed time machine to use different disk, successful backup to that disk, set back to time capsule.
    - tried to add "Backup of HomeMac" and "TimeCapsule" to the spotlight privacy settings. These settings are lost at reboot.... and if I don't reboot it says that it fails to mount "Backup of HomeMac". Likely because it is already mounted?
    - I have 2 macs that backup to this time capsule. It has worked for several months. Now doesn't work for either. One is running 10.5.8.. the other is running 10.5.7.
    - Tried to use DiskUtility on the sparsebundle. It looks clean after a reboot, but then timemachine won't run... possibly because it is already mounted?? It looks corrupted in DiskUtility after I quit the time machine backup. In any case, I keep "erasing" the time capsule hard drive, so if there is a problem with the bundle, it is created from scratch and still has the problem.
    - verify permissions on my Mac's main HD.
    - changed the name of the TimeCapsule.
    I think that is all. I get the same error every time. I don't know if this is a spotlight issue or a time capsule issue. It does affect 2 macs with different OS versions (10.5.7, 10.5.8), so I assume that it is the time capsule.
    One other possibly unrelated issue: When I used to run time machine the backup volume would be mounted with my name. Now it just says the network name. (i.e. it used to say something like "Backup of John Smith's Mac" and now it says "Backup of HomeMac") I assume this is unrelated, but I figured I would mention that too.
    Anyone have any ideas?
    Thanks.

    I think I have finally managed to get this working after 2 days of frustration. It won't be the answer for everyone because it involves opening up your Time Capsule, but this is what I did.
    I noticed on this page (http://www.macfixit.com/article.php?story=20090806095905196) that people were having trouble with file permissions under 10.5.8. When I checked my Console logs during an attempted backup, I noticed chown "Operation not permitted" errors, so I began to suspect that Time Machine didn't have sufficient privileges to do the backup.
    I couldn't find a way to run Disk Utility on the Time Capsule Disk, so I opened up the Time Capsule, removed the HD, put the HD into a USB enclosure and connected it to my Mac. When I ran Disk Utility "Verify" and "Repair" on the Time Capsule Disk partition, it returned the following:
    -----8<------------------------------------
    08/07/09 Friday, August 7, 2009 2:47:34 PM Disk Utility[202] Verify and Repair volume “TimeCapsuleDisk”
    08/07/09 Friday, August 7, 2009 2:47:34 PM Disk Utility[202] Starting repair tool:
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking Journaled HFS Plus volume.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking Extents Overflow file.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking Catalog file.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking multi-linked files.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking Catalog hierarchy.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking Extended Attributes file.
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Incorrect number of Access Control Lists
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] (It should be 0 instead of 39)
    08/07/09 Friday, August 7, 2009 2:47:35 PM Disk Utility[202] Checking volume bitmap.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking volume information.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Volume Header needs minor repair
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Repairing volume.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Rechecking volume.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking Journaled HFS Plus volume.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking Extents Overflow file.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking Catalog file.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking multi-linked files.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking Catalog hierarchy.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking Extended Attributes file.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking volume bitmap.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] Checking volume information.
    08/07/09 Friday, August 7, 2009 2:47:36 PM Disk Utility[202] The volume TimeCapsuleDisk was repaired successfully.
    08/07/09 Friday, August 7, 2009 2:47:37 PM kernel jnl: disk1s3: journal start/end pointers reset! (jnl 0x72c4930; s 0x44ee00 e 0x44ee00)
    08/07/09 Friday, August 7, 2009 2:47:37 PM Disk Utility[202] Repair tool completed:
    -----8<------------------------------------
    Following the repair, I opened Time Machine preferences, and set it to point to the Time Capsule Disk (which was still connected via the USB enclosure). The backup started working almost immediately. I cancelled the backup, put the HD back into the Time Capsule and rebooted everything.
    After repointing Time Machine preferences back to the Time Capsule Disk (now safely back in the actual Time Capsule), I initiated a backup. The backup started working almost immediately (the most success I've had in 2 days) and has been backing up successfully for the past 1/2 hour. I won't be satisfied that I've solved the problem until it completes and I try a restore, but we'll see...
    To be clear: this is a ridiculous "solution" to the problem. I must have formatted the Time Capsule Disk about 15 times using Airport Utility over the past 2 days, including an incredibly long "zero out" format. I have no idea why this wouldn't have correctly reset the disk with the correct settings. If anyone can figure out how to run Disk Utility on the drive without having to tear the Time Capsule apart, it would certainly be a much better solution.
    Cheers, Ben.

  • Time Capsule Will Not Connect to the Internet

    I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

    I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
    o Open AirPort Utility - Click Manual Setup
    o Click the Disks icon
    o Click the Disks tab just below the Disks icon
    o Click the Erase button in the center of the window
    The Quick Erase option will be fine for your purposes. This will only take a moment or two.
    When you are ready to backup the iMac,
    o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
    o Open System Preferences (gear icon) on the dock
    o Open Time Machine
    o Click Select Disk
    o Click on your Time Capsule to highlight it
    o Click Use for Backup
    The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
    Message was edited by: Bob Timmons

  • Time capsule will not turn on

    my time capsule will not turn on

    Is it Gen 1 or Gen 2?
    It is utterly standard dead power supply. Just google tme capsule power supply.. you would be highly fortunate it lasted this long.
    Gen 3. It has a shorted board. They used a batch of poor ceramic caps that short out.
    Gen 4. Don't know.. they will suffer the same issue as Gen 3 if that batch of caps was still being used. They are still too young to have an easy to see pattern.
    Most will be under warranty or applecare still in which case it is apple's problem not yours. Plus they are not landing in my hands yet.. so I cannot give you info.. Apple will never tell you anything.
    Tell us how old? What model A1xxx from the base?
    What size hard disk?
    Do you have just backups or do you have data that needs recovery?
    For just TM backups it is better to let them go now, unless it is gen3.
    Economic life 3years and 3days. The 3/3 principle.. make sure they last the full apple extended warranty.. plus some margin..

  • My Time Machine will no longer back up to my external disk for unknown reasons.  It would not accept my password and said the disk is read-only and damaged.  How can I copy my files to my Mac so I can repair it?

    My Time Machine will no longer back up to my external drive for unknown reasons.  It began after a series of power outages (my equipment is protected by a surge protector with battery backup), and was shut down correctly.  Then it began by not recognizing my disk and my Time Machine password, although I am positive it was correct. I tried NUMEROUS times to get into it. It says the disk is damaged and needs to be erased and started over.  How can I back up my files on my Mac so I can do that? I have no other disk to back up to.  I found the files in a folder called "Backups.backupdb", and tried to copy them into a folder, but get the message "The volume has the wrong case sensitivity for a backup."  The "lost+found" folder did copy for me. Will I just have to lose 4 years of backups?

    Hi there,
    I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
    Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
    I tried all of these without success:
    - deleted backups via iTunes / Preferences
    - deleted backups from sync folder
    - created a new admin user and tried to sync
    - reinstalled iTunes
    - ran all Windows updates, restarted, reinstalled iTunes
    - ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
    Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
    Any hints welcome,
    Cheers,
    Miguel-KA

  • Time Capsule as hard Drive Backup

    Can I use Time Capsule simply as a backup device for my iMac without having to connect my DSL modem to the Ethernet WAN port? Whenever I unplug the Ethernet line from the WAN port, I get the blinking amber light which makes me think that Time Capsule will not operate without the DSL modem - WAN Port hookup. Thanks for the help.

    TC use;
    I don't do TMachine.
    I use the hard disk with the GO function of the Finder.
    I don't use TC as a main backup drive.
    I use it for file sharing between my network and outside of my network when I need files. Example, I live in Michigan but was visiting in Pennsylvania when I needed a .mv4 file(golf instruction I made two years ago). I used the afp function and connected to my TC and downloaded that file.
    I have not used my flash drives for months because I use TC to transfer files between the Macs on my network.
    I also use TC to point movies to my ATV and any other Mac on my network to stream those TC movies.
    So there are many wonderful functions that TC can do for a person. Just pick the appropriate ones.

Maybe you are looking for

  • Wrong document type is processed form ME59N - Automatic PO creation Efected

    Dear Friends, Im facing one issue while the PO is created from Purchase requistion(ME59N). If the purchase requisition document type is - XTB while creation of PO from ME59N the document type is taking as UB the SPRO setting has been done for supplyi

  • My Ipad is locked and it tells me to go to Itunes why

    I have enter a password by mistake when I was making a change in the settings and then to compound my mistake I entered the password to many time and now my Ipad is locked and at the top of the screen on my ipad it says to connect Itunes. I don't kno

  • Running x in a xen domU

    Hey guys, I am trying to configure myself what I would like to consider a poor mans sonos using xbmc and yatse to control it remotely. So far, I have managed to install arch as a domu vm and I am passing through a soundcard for obvious purposes.  Fro

  • Org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)

    I started up FB 4 today and got this error in my log: Any ideas good friends? !SESSION 2009-10-28 12:33:26.601 ----------------------------------------------- eclipse.buildId=unknown java.version=1.6.0_16 java.vendor=Sun Microsystems Inc. BootLoader

  • AF:Query -how to hide attribute in basic mode but show/add in advanced mode

    Hello, I have a requirement to initially hide some attributes when displayed in BASIC mode of af:query with the possibility to add these hidden attributes in ADVANCED mode. Is it doable somehow? edit: JDeveloper 11.1.2.3.0, ADF BC Regards, Miroslaw E