My timecode changed to five digits APE11
APE 11 running Vista
All of a sudden my time code changed from h:m:s;f to five digit numbe. I have searched every phrase I can think of relating to timecod and have fround no answer. You would think it would be indixed someplace.
So, how do I reset my timecode on my time line back to h:m:s;f, please?
Thanks in advance.
Cheers and Peace! Phil
I knew this would happen as soon as I pressed the Post button.
I found it under:
Edit/Project Settings/General/Display Format/change to 30fps Drop Frame Timecode
I still don't understand why that is so difficult to find any place. It did not show up in APE Help.
I just stumbled over it back tracking what I looked for before.
Cheers andPeace! Phil
Similar Messages
-
How to change slider control digital display precision from program
I want to change slider control digital display precision from my Labview 2013 program. I can not find property that changes slider digital display format.
Solved!
Go to Solution.rt clk the digital display>create>property node>format string
you could also do the slide scale, if needed...
from the front panel:rt clk properties>goto display format tab>goto drop down list and pick "digital display 0" and format -
Change Name in digital signature
After getting married how do you change your digital signature in Adobe? Do you have to delete the original and start again? If so, where is it stored so that if can be deleted?
You do not change digital signatures in Acrobat. You need to get a new signature from the organization that provided you the first digital signature.
-
Timecode changes when batch capturing
I am capturing betacam sp footage into FCP 5.1 on a dual G5 2.3 box, and using a Kona LSe card. Timecode is running through the 422. For the most part, things are going smoothly, but I am now running into an issue where when I batch capture my logged clips, the last 10 to 15 sec. is chopped off. I generally can just enter the time code again manually to fix the issue, but some of my clips are 8 to 10 min long (interviews), and my client is getting irritated that we are having to capture them again. I also tend to batch capture the majority of these long bites overnight for next morning's session, and they are now consistently coming in with the ends lopped off. FCP is actually changing the timecode on the clip, making me question whether or not I entered it correctly the first time. To prove that I'm not crazy, I monitored the capture on the first couple of clips, and sure enough, FCP decides that I don't need the last 15 sec of my clip, and changes the timecode accordingly during the capture.
What's going on? Is it the Kona card or its software? Thanks.Well I recently had a similar problem that is really driving me crazy.
While capturing 720p 59.94 from the D5
In FCP when I log a clip at:
01:20:00:00 in
01:20:30:00 out
After Batch Capture is complete the clip shows up in the browser as:
01:19:55:05 in
01:20:25:05 out
FCP is effectively changing the logged timecode of the clip.
In all my experience with FCP I have never encountered this issue and I am completely puzzled. I've contacted AJA and they have said that they do not know of this issue and were puzzled also. The only thing about my current configuration that is not completely right is that I am not using a Tri-Level Sync at the moment. We get ours tomorrow. AJA suggests using the Tri-Level Sync with the Kona 3 card, but would that cause a glitch of this nature? I will try again tomorrow of course and update, but does having bad 720p reference effect how FCP logs and handles TC? To my knowledge it shouldn't and makes me think that there may be some sort of FCP error occurring. There is no reason why FCP should be changing my logged clip settings. Also, I tried a test where I made the clip that came in with the bad timecode offline, and then ran a Bath Capture again, and it changes the logged timecode even further. I've tried a variety of Device Control settings playing with frame offset etc with all having the exact same numeric result (see TC above).
Anyone who has any insight or similar experience your thoughts are greatly appreciated. Thanks for the help
Ted - Editor, NYC -
Logged Timecode Changes after Batch Capture
I'm working with the Kona 3 and the Panasonic D5 (HD3700B)
I'm having a problem with FCP changing my logged clip TC after Batch Capture in 720p 59.94. This problem only occurs in 720p mode, 1080i is just fine.
While capturing 720p 59.94 from the D5
In FCP when I log a clip at:
01:20:00:00 in
01:20:30:00 out
After Batch Capture is complete the clip shows up in the browser as:
01:19:55:05 in
01:20:25:05 out
FCP is effectively changing the logged timecode of the clip. I'm capturing with burned in TC and the Burned in TC is Frame accurate, but why is FCP changing the clip's TC?
In all my experience with FCP I have never encountered this issue and I am completely puzzled. I've contacted AJA and they have said that they do not know of this issue and were puzzled also. I am using a Tri-Level Sync and everything seems to be getting proper reference.
There is no reason why FCP should be changing my logged clip settings. (right?) Also, I tried a test where I made the clip that came in with the bad timecode offline, and then ran a Batch Capture again, and it changes the logged timecode even further. I've tried a variety of Device Control settings playing with frame offset etc with all having the exact same numeric result (see TC above).
Anyone who has any insight or similar experience your thoughts are greatly appreciated. Thanks for the help
Ted - Editor, NYCThe BITC matches the original Logged TC (even though the logged TC changes after capture)
Logged TC (Media Start/End in FCP)
01:20:00:00, 01:20:30:00
Captured TC (Media Start/End in FCP)
01:19:25:05, 01:20:25:05
Burned in TC Captured (Viewable on Video File)
01:20:00:00, 01:20:00:00
I'm very curious about what yourlooking at on the deck manual. Page 145??? I don't see a page 145. It's been my understanding that the Monitor HD-SDI does produce the 720p 59.94 signal, and that's what all my monitors and Kona say that their getting.
Also, could you clarify your last sentence.
*"Forgive my guessing but this deck looks like it really wants to work in 1080 and 720 is kind of there to step up from 8 bit DVCPro HD."*
I dont think that its a 23.98 issue and our source tape is not 23.98, even still if it was, it shouldn't effect the logged TC.... but I'll try it in the morning, could'nt hurt.
Update: A person over the phone at Apple "didn't" (did) say over the phone that upgrading to 5.1 (universal) would improve 720p capabilities.
So the next step will be giving more money to Apple for Universal and installing the new Kona drivers released yesterday.....and then let the testing fun begin again.
Thanks so much for your help, please let me know where to find that info in the D5 (3700B) manual. Cheers. -
I tried calling the support line for this and got hung up on, but the only thing wrong here is what the iTunes Store is doing--"correcting" my five-digit ZIP code to a nine-digit version my bank doesn't recognize. It's not like I'm going to change my correct billing address for this, so what do I do?
Have your bank put the full 9-digit zipcode into your records. The postal service doesn't require them, but they prefer them. It's very common to have the zipcode changed by online vendors to assist in shipping.
The problem is with your bank. Their software should know better. -
FCP Adding two frames to Starting Timecode change in Sequence Settings
Hi I am trying to change my starting timecode in my sequence to 09:58:00;00 but FCP keeps adding an extra two frames to make it start at 09:58:00;02 - my sequence is in DF. I am changing this by going into Sequence Settings > Timline Options > Starting Timecode. Anyone else have this problem? It's awfully frustrating - perhaps a glitch?
IF you ripped to DV NTSC, it should have come in as DF.
What are the specs of the Digibeta material?
Are you delivering on Digibeta or as a QT file?
Is your client asking for a master beginning with 09:58:00:00 DF starting timecode? You could set the starting timecode for 09:57:29:00, then add an additional second of black at the head of the timeline. The client is most likely needing DF timecode for 'show timing' purposes...is this to go to broadcast? -
Audio Timecode changes when match framing
I'm working in Premiere CC v7.2.2. While working with synced audio, I've noticed that when matching back from audio in my sequence, the timecode displayed in my source monitor is off by a matter of minutes. Each .wav file I'm using has about 10 tracks of audio. This is slowing our workflow considerably and could cause problems for us down the line. Has anyone else experienced this issue? Any help would be appreciated!
kmbarry23_,
Thank you for snapping photos to clarify this problem.
Richard, by default, the "audio time units" or samples is unchecked in the Program Monitor, and the affected timecode to the right of the Program Monitor's wrench/spanner refer to the last frame of media in the sequence, not the timecode of the clip nor audio file your playhead is parked on. The problem is that the dual system audio Overlay timecode as kmbarry23_ has revealed is always displayed in "audio time units" or samples. The only preference in Overlay settings is "source timecode," so there is nothing to change.
The camera timecode overlay displays correctly, so you have to match frame on your clip, make a marker, and then match frame on your audio, type in the camera timecode, make a marker, and line to two up in the sequence; not too shabby, but it defeats the efficiency and usefulness of overlays. Coupled with the Indeterminate Media Timebase preferences under "Media" always defaulting to 29.97 and the random glitch of drop frame defaulting in the source monitor, it could be confusing how Premiere was really reading the field recorder's timecode.
Perhaps not all editors are experiencing this phenomenon depending on whatever field recorder was used, but I am still experiencing this problem in CC 2014 (last two week's big update) with jam-synced Ambient timecode from a Sound Devices 744t into a Sony F55 as well as a Red Epic.
Yes, Pluraleyes is very popular, but not without its own set of glitches. I'd prefer to use Overlay settings in Premiere for syncing when the effort of jam-synced timecode was administered. I'll submit a bug report. -
Aux timecode changes after entered in Modify Timecode window
I'm trying to manually add an aux timecode to some clips so I can edit them with multicam editing (two cameras DV, two DVCAM), the timecode itself isn't synced however I did have the cameras pointed at an external timecode generator for a few seconds so that I could get a constant, external time reference). Two of my clips accept the new timecode with no problems, however one of the other ones demands to add 8 frames to the timecode I enter, the other demands to add 14 frames.
I just realized that the DVCAM footage is Non-DropFrame timecode, but I'm adding a drop-frame timecode to it. That might explain it...The BITC matches the original Logged TC (even though the logged TC changes after capture)
Logged TC (Media Start/End in FCP)
01:20:00:00, 01:20:30:00
Captured TC (Media Start/End in FCP)
01:19:25:05, 01:20:25:05
Burned in TC Captured (Viewable on Video File)
01:20:00:00, 01:20:00:00
I'm very curious about what yourlooking at on the deck manual. Page 145??? I don't see a page 145. It's been my understanding that the Monitor HD-SDI does produce the 720p 59.94 signal, and that's what all my monitors and Kona say that their getting.
Also, could you clarify your last sentence.
*"Forgive my guessing but this deck looks like it really wants to work in 1080 and 720 is kind of there to step up from 8 bit DVCPro HD."*
I dont think that its a 23.98 issue and our source tape is not 23.98, even still if it was, it shouldn't effect the logged TC.... but I'll try it in the morning, could'nt hurt.
Update: A person over the phone at Apple "didn't" (did) say over the phone that upgrading to 5.1 (universal) would improve 720p capabilities.
So the next step will be giving more money to Apple for Universal and installing the new Kona drivers released yesterday.....and then let the testing fun begin again.
Thanks so much for your help, please let me know where to find that info in the D5 (3700B) manual. Cheers. -
Change vendor in digital editions
Hi. When I autorized my computer in digital editions, I chose the wrong vendor. I do I change this?
"ADE supports Adobe DRM and several other DRM schemes, such as Nook DRM. When opening an eBook encrypted with another DRM scheme, you will be required to input the Vendor ID given by the its provider" So you should be able to change it when needed. You can also try crt+shift+d to deautorize and reautorize ADE with the correct ID / Vendor ID.
-
Hi,I'm now using Ideapad Z510. After upgraded to Windows 8.1. I'd went to the Lenovo website searching for new driver update.
But, after i install the "Realtek Audio Driver 6.0.1.7023", the "Dolby Home Theater V4" is not running(audio sound not playing through).And, the "Dolby Digital Plus" is running instead of "Dolby Home Theater V4".
Then, when I try to reinstall the older version "Realtek Audio Driver 6.0.1.6954" from Lenovo website, the "Dolby Home Theater V4" is running again.
Truly, the "Dolby Digital Plus"'s sound is crisper and louder than "Dolby Home Theater V4". But the sound of "Dolby Home Theater V4" has more bass and more function (like Graphic Equalizer, more Intelligent Equalizer etc.).
Is this an update or what?
What should I choose?The newer driver (for Windows 8.1) or older driver (for Dolby Home Theater V4)? Thanks. (confused now) @@Hi all
Could you try out DAA or DHTLightweight from my link and just install the Dolby software without overriding your Realtek Driver? I am not sure whether would it work, but worth a try. I have tried on Y460, W520 and G560 with great experience.
If the older Dolby software does not work with your existing Realtek driver, you could install the DAA or DHTLightweight with their driver to overwrite and see how it goes.
Thank You
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet -
Photos event dates are changed to three digits, followed by "IMPRT"
In the Photos section, when I click on "Events" the pictures used to be arranged by date. Then they became arranged by three digits followed by the letters "IMPRT". For a time the top thumbnail didn't correspond with the photos in the stack, but that appears to have corrected itself.
This occurred before updating to OS 4.3.5 but still continues. I have tried clearing and restoring the iPad to no avail.
Thanks!Were you ever able to fix this problem?? It seems to be gettng worse for me. Pockets of IMPRT here and there between ones with real dates. I also found a group of pictures that did not sink automatically to my MAC from my ipad.
I like to choose and delete on my Ipad, and let it sink to the Mac. -
Cannot change precision of digital display of a numerical control
Hi,
This may be a stupid question. But in the attched slider control, I am unable to set the precision of the digital display. I can only set the precision of the scale. What do I need to do? Thanks.
Peter
Attachments:
Horizontal Fill Slide (numeric control) question.vi 9 KBIn the upper left of the display format tab of the properties dialog box, select digital display.
I agree that it could be implemented better, for example if you right-click on the digital display ...display format. it should land on the dialog with the digital display selected. It currently does not.
(as a general rule, you should avoid overlapping controls. It hurts redraw performance)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DigitalFormat.jpg 42 KB -
Egypt mobile prefix code phone changed to 11 digits
When Egypt Changed mobile prefix code to 11 digit, I have to store all my contacts twice (one without +20 ### ########) and other (one with +20), otherwise when one stored with +20 will not appear as a stored number when calling and vis-versa, also when receiving messages all comes with the +20, so if it is stored with +20 iphone will not show it as a stored number.
Any one can help in this.
By the way, I tried to change regional setting to similar 11 digit phone number like Australia, but it did not work.
ThanksSome friends told me about installing a package from Cydia if you have a jailbroken iphone, the package name is "CallerID-format Fix"; I didn't try it myself. My iPhone is not jailbroken so my problem is not resolved yet. Please post if you found any other way to resolve this issue. Thanks.
-
USB-6009 digital input change detection
Hi,
I am trying to acquire digital signals from an ni usb-6009 device using daqmx on labview 8.0. I need to write the signals from a port of the device to an output file only when there is a change in the signals and I am not able to do this successfully. I created a digital task in MAX and was able to select acquisition mode as '1 sample (On Demand) ' only. Any other selection for acquisition mode would result in error 200077 with the following message -
Measurements: Requested value is not a supported value for this property.
Property: SampTimingType
You Have Requested: Sample Clock
You Can Select: On Demand
I selected '1 Sample (On Demand)' acquisition mode and was able to see the channel values on running it in MAX as I rotated a device connected to the usb-6009 device. As expected the hex values on MAX were showing up as FF,7F,3F,BF and this pattern was repeated everytime I provided the input by rotating the device.
Next, I created a simple vi to use the digital task I setup on MAX. I want to be able to record the signals only when there is a change in the digital pattern from the channels.That is when there is atransition from FF to 7F to 3F and so on, the vi should write to an output file and if no change happens, it should not write to file. To do this, I explored the Timing vi and tried using the 'Change detection' mode, but that produced the same error as above.
Can anyone please suggest a way to accomplish what I am trying to do ? Any guidance will be a hugely appreciated.
Thanks
~SejAll of that effort with sample rates, timing, change detection, etc ciuld have been avoided if you had read the specs. As you finally found out, the device only supports sftware timed i/o and no change detection. You wll have to do your change detection in software this is done with a shift register/feedback loop.
Maybe you are looking for
-
I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I
-
How to get a "char variable" with presentation variable???
I want to pass a char variable with presentation variable, I don't have problems if I pass "int". For example in answers page I add a column that contains years of my dimension. 2000 until 2012 and prompted my presentation variable "year" (from my da
-
NLS Archiving in BI 7.0
Hi Experts, I have some doubts on NLS Archiving. 1) When I am working with SAP ADK Archiving in BI 7.0, the data which we are going to archive needs to be compressed. I have come across this problem and I compressed the data and the data ar
-
My purchase did not fully download from iTunes - now what?
I purchased season two of game of thrones from iTunes. I only received one episode. How do I get the other episodes to download? They are not showing up as available to download - I have used all the help pages currently listed in iTunes help. Now wh
-
How to automate managed beans.xml update
I am using JSC 2.0 ea and am trying to add a "loginBean" based on the example in java studio creator field guide. The process explained in the book, ie right-click "source package" add java package, right-click newly created package and add "managed