My Toshiba external hard drive is no longer being recognised by my Macbook Air - solution?

My Toshiba external hard drive is no longer being recognised by my Macbook Air. The light on the hard drive is on, but it won't appear on my computer's desktop or anywhere else. How can I fix this?

Hi rivraff,
If you are having issues mounting an external hard drive volume, you may want to see if it shows up and/or can be repaired in Disk Utility; you may find the following article helpful:
Apple Support: Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
Regards,
- Brenden

Similar Messages

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

  • Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours.  Does this mean TM is backing up my hard drive?  I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do.  I'm not sure if there are any new external hard drives that are compatible with ML yet. 

  • I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

  • Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

    Why my Toshiba mobile hard drive (1TB) can not be used in the macbook air?

    If you are speaking of the USB 3.0 Canvio, you are not alone. Call Toshiba and check on their progress in alleviating the problem. I heard they are blaming Apple, but since theirs is the only drive that exhibits this problem, I think the burden is on Toshiba.
    Some users have reported that by using a micro USB 2.0 connector (see bottom picture), instead of the 3.0 that comes with the drive, that it is a workaround. Notice that the 3.0 connector has sort of a "dual head" nature to the construction. One part of it is 2.0 USB micro compatible. I've never tried it myself though.
    Read ths thread for a discussion on the subject.
    https://discussions.apple.com/thread/3510032?tstart=0

  • My Lacie Hard Drive is no longer being recognized by my MacBook, please help.

    Hi all,
    I have a Lacie external hard drive (LaCie Rugged XL eSATA 3Gb/s | USB 2.0) that I have been using on my MacBook (timemachine) (late 2008, 2.4 GHz Intel Core 2 Duo with OS X 10.9.1). One day it stopped being recognized, not showing up on the desk top, the disk utility program, etc.
    I Googled many articles, blogs and support communities but have yet to find any solution. I also went to the Lacie support site and followed the trouble shooting instructions - changed my power source, usb cable, and tried the drive out on 3 different computers. The results: The drive works fine on the other computers (OS X and Windows) using the same power and usb cords. So Lacie recommened I contact Apple but my MacBook is not under warranty so I have decided to try my luck with the Apple Support Community. If any one has had this problem or knows the solution, please let me know. I would like to continue to use my MacBook with this Lacie hard drive.
    Thanks

    Hi Dibenkorn,
    Yes, both USB ports are not recognizing this lacie external hard drive. I also tried the SMC reset but that did not change anything. I have another external hard drive (smaller one) and it works on this computer fine and like I said before the Lacie works fine on my other (older) MacBook. I just can not figure out what went wrong or what happened...

  • Can I move Itunes from a pc based external hard drive on to a Time Capsule linked to Macbook Air? Is Timecapsule a good backup option for a 'silver surfer'?

    I have a Macbook Air, iPod and old pc with external hard drive. My iTunes is on the pc which I sync with my iPod. I am thinking of buying a Timecapsule for backing up Macbook. At the  sametime would it make sense/be easy to move iTunes library on to new Timecapsule and access it from Macbook?  Or would I have to store the iTunes library on Macbook internal drive? (pc is getting old and will eventually be binned).  Thanks in advance

    speachmusic wrote:
    if I ran an eithernet cable through my flat
    you could do that - or you could employ a pair of *powerline adapters* _*such as these*_.
    either way, as William pointed out, it will boost syncing speed and improve reliability.
    Or can I attached an external hard drive to the time capsule, set it us as a network drive and then set that drive in the iTunes preferences as where to where its media folder is?
    yes. my test iTunes library lives on an external HD hanging off my TC and, using a hardwired connection, data transfer speeds are more than sufficient for what you intend to do.
    in fact, i would recommend the external drive connected to the TC over using the TC itself. one reason is that you will not be able to backup what is on the TC's drive using time machine. also, if the TC croaks and needs to be replaced, it will be difficult to retrieve the data from it.
    an external HD, otoh, could be connected to you Mac periodically and backed up to another external HD using free apps such as _*Carbon Copy Cloner*_.
    JGG

  • How to set up a Toshiba external hard drive on my Macbook Pro?

    Hi there,
    I just bought a Toshiba external hard drive that says on the package it is compatible with Macs. I plugged it in, installed the Pogoplug PC for Mac (no idea what this is) and Tuxera NTFS for Mac (it was in the "Mac Driver" folder). Now what? Is my data now automatically going onto the hard drive? Do I need to install anything else? This seems too easy! What am I missing here?
    Thanks!

    New hard drives out of box should be formatted for your Mac
    go to DISK UTILITY and verify what it says your HD is formatted as under the "ERASE" tab
    HFS+ above is the "mac format"
    Format (erase) it in "mac osx Extended journaled"
    AFTER THIS YOU CAN DRAG AND DROP FILES AS YOU LIKE 
    To show HD on desktop
    go into FINDER at top then PREFERENCES  then GENERAL tab
    then check "hard disks" and "external disks"
    There is no such thing as a MAC or PC hard drive,.....they can all be formatted as you wish for either PC or Mac (or both)
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • How do I get my MacBook Pro to recognize my Toshiba external hard drive?

    How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

    natgray17 wrote:
    I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive. 
    Huh, in the Finder menu, Preferences, you will see this:
    Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
    If DU cannot see it then the preferences is just an academic exercise.
    If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive.  What else do you have plugged into the USB ports?  If there's some stuff you can unplug it then do it and see if your drive mounts.
    What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
    Which is all I wanted to know, i.e., whether the drive came from a Winows machine.  So it's been formatted and created on a mac.  Therefore it should mount on this other mac machine.  So it most likely is a power problem.

  • My external hard drive will no longer connect to my macpro......any ideas on how to solve this problem??

    My external hard drive will no longer connect to my macbook pro via FW800........Any ideas on how to solve this??

    Reset the SMC, see this Apple note: http://support.apple.com/kb/HT3964
    Also reset the PRAM:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    In most cases, those two actions will fix the port issue. If it's still an issue, you may need to see if the external hard drive can connect to another system, to ensure it's not having problems.

  • My external hard drive is no longer showing up on my computer display

    My external hard drive is no longer indicated on my computer desktop display. I have checked connections. What do  I do next?

    Finder->Preferences->General->set show according to your wants.

  • My external hard drive is no longer showing up on the desk top, it wont even work when I plug it into my media player anymore, help?

    My external hard drive is no longer showing up on the desk top, it wont even work when I plug it into my media player anymore, help?

    Go to Finder > Preferences > General > and in the top section where it says external disks check that the box is ticked.   If it is check the connections.

  • Owc mercury elite external hard drive will no longer come up on my desktop

    owc mercury elite external hard drive will no longer come up on my desktop?

    Can Disk Utility see it?

  • HT1338 I bought my macbook pro november 2011 and I still cannot use my toshiba external hard drive.  what updates do i need to get?

    I don't know my operating system.  I bought it in nov of 2011.  I am trying to axcess a toshiba external hard drive.  what new update do I need to get?

    You can find out your current system version by select About This Mac from the Apple menu.  To make sure it is updated, select Software Update from the Apple menu.  A Mac from Nov. 2011 is probably running "Lion," and the latest version of Lion is Mac OS X 10.7.4.
    But that should not affect the connection of an external hard drive.  There are no special updates for connecting standard external drives.
    Does the external Toshiba drive connect by USB port?  Is it the smaller type that gets power from the port (no conection except for the one cable), or is it larger (with its own power supply)?

  • My toshiba external hard drive is not being recognized, except when I eject it. I have the preferences checked to show icon and have checked utilities folder. nothing. Help!

    I have a iMac, Yosemite 10.10 and my toshiba external hard drive is not being recognized, except when I eject it!. I have the preferences checked to show icons and have looked in the utilities folder..nothing. I have also changed ports. ??

    A few things to try:
    1-Repair permissions and restart your computer.
    2-Zap the PRAM
    3-Use Software Update/App Store to update your OS to OS 10.10.3.  Also, update everything SU/AS has to offer for your computer.  When done, repair permissions and restart your computer. 

Maybe you are looking for

  • Experiences mixing DDR memory modules

    Would you people post here experiences mixing DDR memory modules in order to help me/others take buying decisions? I currently have a PC2100 256MB Samsung module and a MSI KT266 PRO2 and want to buy a new module. As I  cannot find one similar to the

  • F-53 and DME (urgent)

    hi guru's F-53 does not give me the option to change currency/rate,  this option was available to me earlier. Reason 2 Payment run When I am selecting prinout data/medium the only variant I have available is 5200 xyz, please advise why I cannot view

  • Autorun PDF on CD in Acrobat 7 and above

    I have a large problem. I am trying to autorun a PDF file (created in Acrobat Pro 9) to Autorun on a CD in Reader 7 and above. I have tried having reader on the CD and it doesnt work. My computer has autorun enabled. I have tested the CD on multiple

  • How to invoke BPEL process from database?

    Who can get an advice: what technology is better to use for invoking BPEL process, that is deployed to remote server, from database? What LIBs should I load into this database? History: after successful trying Oracle RMI-example whith JDeveloper, I r

  • Convert from v.10 to v.9

    Hi, all. This topic isn't really a question, just to ask a favour. I created a LabView project when using LB version 10, then I downgraded to version 9, and I forgot to convert it. It's just a project file and several VIs. Could somebody using LB v.1