My Toshiba external hard drive won't mount after OSX Mavericks update. Please help.

Two days ago I updated to Mavericks 10.9.3 and prior to this, my Toshiba 1TB external hard drive worked perfectly well. Since the update, my hard drive will no longer mount. It shows up in Disk Utility but will not let me 'mount', 'verify disk' or 'repair disk' through Disk Utility. My sister has an identical Macbook Pro which she has not updated to Mavericks. I have tested my hard drive on her laptop and it works just fine. Can anyone tell me how to fix this? Do I need to reformat my hard drive (and if so, will that clear everything on my hard drive?) or is there a simple fix?
Thank you for any assistance you can offer!

Reset the NVRAM/PRAM and Reset the SMC, then try again.

Similar Messages

External hard drives won't mount after upgrading to Tiger 10.4.9. Help!

Hi, I've just got the latest iMac. Very excited! I did all the software updates, connected my Western Digital extended hard drive so that I could copy some files over onto my new Mac. It was fine at first. Then when I wanted to open up the external hard drive icon on my desktop again and double clicked on it, everything disappeared from the screen for a few seconds, then reappeared but my external hard drive simply opened the window to my personal hard drive on the Mac. The WD links to my computer via Firewire. I then connected my USB external hard drive stick and it was the same story.
I used Disk Utility to test everything and everything was fine.
I then reinstalled Mac OSX 10.4.8 and plugged in my external hard drives. Everything worked perfectly. After copying over documents and a couple of programs, and downloading a few more programs, I ran my software updates again, upgrading the operating system to Tiger 10.4.9. I attached my external hard drive and it was the same problem all over again.
I the read up the online discussions and also chatted to an Apple dealer, and their advice was to download the Intel Combo and reinstall the operating system. I have just done this and my external hard drives will still not mount properly. Their icons appear on screen but double click them and everything disappears.
Please help. This is really frustrating as I have a backlog of work to do and I seem to be wasting hours on this. Not only that, this is a brand new machine which I rightly expect to work straight away.
I look forward to your response. Thank you in advance.

Hi, try to put your HDD in other Mac and look if appear the same, also you can try to repair permission.

Installed new version of itunes and now my toshiba external hard drive won't mount

All of my music and photos reside on this Toshiba hard drive. I successfully had itunes find the hard drive for the library. After I installed updated itunes to mac, the toshiba doesn't mount to any of my computers. (I've tried it on more than one) The light on the drive comes on, but I never see it on my desktop. Thank you for your help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Firewire external hard drives won't mount after using Windows Vista

Hi to All,
I installed Windows Vista Business in a SATA hard drive I added to my Mac Pro. Every time I select the HD from the start up disk in my preferences and restart, the next time I start up with Mac OS 10.6.1 all my firewire devices don't mount. I have to shut down my Mac unplug the power cord for a few minutes to get my firewire devices back. Do you know of any workarounds to this issue? Thanks in advance!

Yea, don't use Snow Leopard or don't use Firewire for now.
Nothing to do with Vista Business.

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

External Hard Drive Won't Mount

I've got a new 500GB Toshiba external hard drive, connected to my computer via a USB. The first time I connected it, it showed up just fine, but after ejecting it, and connecting it again, it doesn't show up in Finder. I've gone to Disk Utility, and it does *show up* there; however, I can't verify or repair it (the buttons are all greyed out.) What can I do?
Any help would be greatly appreciated. Thank you!

I am having this exact same problem with a WD hard drive, it was improperly dismounted from a Mac and i'm pretty sure the data is ok, but the partition table is corrupted. I tried diskwarrior and some other utilities without any success, although testdisk (http://www.cgsecurity.org/wiki/TestDisk) was able to read the drive and could see the data, i do not have another drive to back it up to. In fact i have this exact same problem with 2 external hard drives, caused by the same thing, is anyone aware of this being a recurring bug in OSX 10.4.11? One would think that Macs being such user friendly machines they would not be so prone to causing major problems on a routine bad dismount... My windows XP machine recognized the drive, and started to mount it but hung partway through the mounting process. I will check back if i find a solution, and please if you could post any breakthroughs you might have it would be appreciated. Good luck!

External Hard Drive won't mount on desktop!

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

Dear Jason,
Gary's advised is, IMHO, a very sound one.
The only thing I can think of about your problem, given the information you have provided us, is to run Disk Warrior on your external HD.
In fact, DW is particularly indicated in events, like:
"...you should run DiskWarrior when you suspect that there is directory damage on one of your disks. Directory damage can result in the disk not mounting (not appearing on the desktop when the computer is started), missing files or folders, an inability to move or copy files, or crashes when files are used...".
You could actually buy your copy of DW Licence on-line and download it directly onto your internal HD, starting from this "Information you must read before you make your purchase" page. A hardware copy of the software you have so purchased, will follow by postal service (or currier, if so you choose), shortly.
Follow all the instructions you will find in the download to install the DW software onto your main internal HD and then run it on your external hard drive.
DW has saved my data several times and in similar situations as you are experiencing. IMHO, you should seriously give it a try and, even in the unfortunate event it does not manage to solve your problem, it is one of those Mac OSX utilities which ANY Mac power user MUST have handy at all times.
So, no matter what, my opinion is that it is always well-spent-money those used to purchase your copy of DW: in the long run, you won't regret it.
In the event that even DW is unable to retrive your precious data, my suggestion is to contact Micro Com data recovery. It's going to cost you some money, but if you make a leaving out of the data you've lost on your external hard drive, it's going to be worth it.
All the best.
Costa

Hard Drive Won't Mount After Repair by Second Computer

I have an G4 Cube with OS 10.2 on the internal hard drive (which is full) and OS 10.4 on an external La CIe hard drive (that I use as my main OS). The external hard drive accumulated serious damage that couldn't be repaired by Disk Utility on the internal drive. My copy of DiskWarrior X would not run under OS 10.2 (10.4 was required) and it wouldn't boot from the CD either So I connected the external hard drive to my second computer, an iMAC running OS 10.5. (Unfortunately, I disconnected the external hard drive when the computer was off instead of ejecting the drive by dragging it to the Wastebasket.) The external drive mounted and DiskWarrior easily constructed a new directory, defragmented the files, and eliminated all of the damage on the external hard drive visible to Disk Utility. However, when I reconnected the repaired external hard drive to the G4 Cube, the drive wouldn't mount. Privileges were repaired on both computers with the external drive connected without helping. Being repaired while connected to a higher OS or perhaps simply being connected to a higher OS seems to have left the LaCie external hard drive in a state which couldn't be mounted by an earlier OS.
Following this hypothesis, it booted the G4 Cube from the OS 10.4 Installation CD while the LaCie external hard drive was connected. When I cancelled installation of OS 10.4, I was asked to choose a start-up disk AND OS 10.4 WAS NOW MAGICALLY AVAILABLE ON THE EXTERNAL DRIVE. Simply starting up from a more advanced OS allowed the hard drive to mount.
Shockingly, when I restarted from OS 10.2, the external hard drive was still mounted. Whatever was preventing the drive from mounting was a TRANSIENT STATE, not backwards incompatability.
POSSIBLE LESSON: If a hard drive won't mount on computer A after being connected to computer B, consider booting computer A using the OS on the installation disk from computer B.

If you need to repair a hard drive with OS X installed on it, you must use that same version of OS X to perform the repair. Using another--in this case, newer--OS can cause quite a bit of trouble, as the directories/permissions may be dealt with differently between the OS's.
Seems you've learned this lesson--and luckily you didn't lose anything!
~Lyssa

External Hard Drive won't mount - tried Disk Warrior, am backing up as a .dmg...will this work?

Hi Guys,
Hopefully someone can help! Fairly desperate situation here...
I backed up around 700GB of data to an Iomega external hard drive (supplied by the client), using my Macbook Pro...all was fine when I unmounted the drive at the end of the backup.
The client took the drive away and called me to say he mounted the drive in Windows (on a PC), and he was able to work with the files for a time, but now the drive won't mount...
I collected the drive, hooked it up to my Mac Pro, but OSX tells me it can't mount the drive. It shows up in Disk Utility in the sidebar, but not on the desktop...
I tried repairing the disk using Disk Utility and with Disk Warrior, both tell me the disk cannot be repaired...
I am currently making a backup of the drive as a .dmg file, using a program called Disk Drill...it's slow as I expected, but I'm still not sure the .dmg will mount...because surely it's just making a copy of the data exactly, of which some part is not mounting (a mount directory or something???)
Is there any way you guys can think of me somehow taking the data and backing it up onto another disk?
Specialist recovery services seem to think there shouldn't be any problem recovering the data, and of couse, as a costly last resort, that's what I'll have to do, but does anyone know how they may go about doing it? It is something vastly complicated such as a command line thing?
Sorry about the length of this question...just hope someone can help!
Thanks in advance...

You didn't say what format (filesystem type) the disk was.
However, I'd say your analysis is probably correct. Something has corrupted the disk. You can make a disk image copy to the .dmg which will preserve the data, such as it is, but I doubt extremely if it will fix any file system corruption.
Furthermore, if both Disk Utility and Disk Warrior have said the disk is unreadable I'm dubious that anything else will magically repair it and that recovery probably consists of snuffling through the disk block by block.
However if the filesystem is FAT (Windows) there may be other (Windows) utilities that can fix it.
You said you 'backed up the data'. Does that mean you still have the original data on your MBP? Are you trying to recover the client's changes?

10.8.5 external hard drive won't mount

After installing 10.8.5 update my Seagate external hard drive that I use as my Time Machine backup won't mount. I can see it in Disk Utility, but it refuses to mount.
Anyone else? Suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

1Tb External Hard Drive won't mount

I've owned a 1Tb Seagate external hard drive for about one year, and I've installed the software that comes with it for what I thought would be "peace of mind" (now I know to reformat, but my problem is that there is content I would like to save first). I have used it mainly as a scratch disk when I work with big files, and I've never gotten to more than 25% of the total capacity in saved data. A week or so ago I was about 30 min into the work day when suddenly the warning window for improperly ejecting USB came up, but the 1Tb was still plugged in. Since then I can no longer see the 1Tb drive anywhere but in disk utility, and the second icon for it looks lighter (grayed out). When I tried to mount the drive it says to run First Aid first—because the drive could not be mounted—which comes back with no problems, and it will still not mount. I have tried verifying and repairing permissions, which shows no problems either. I've tried Kext Utility 2.6.1, SMC, and PRAM without any luck. I've tried Tuxera NTFS, and even uninstalling Seagate's software, but I haven't seen any results either. The 1Tb runs normal, the light will turn on when plugged in, and it will go off when ejected, which also works without warnings. I have all the software up to date, but I have not been able to link my problem to the OS system update like others did since it had been done several weeks before the incident.
I have seen this problem a few times rolling around, but only a few lucky ones have been able to fix the problem. I am posting this because I have not seen anybody with the same list of unsuccessful attempts, but I am hoping that there is something else that can be done.
Thanks in advance

USB Ports can sometimes be funny like that. If you haven't already, these are some little things you can try:
- First things first, unplug all your usb devices. Try plugging a device that you're sure works on your MBPR over EACH of the usb ports (just to check if they're both working correctly & supplying power on the mac itself).
- Check the USB cable's A plug (the end that connects to the mac) and make sure both the contacts are clean, and that the crevass is free from dirt/lint buildup, as it can interfere with a proper connection. (This can happen if you store cables in cases or bags).
- Sometimes easing the USB plug slightly out from the computer may help mount certain devices. If it DOES mount (abruptly) after this, then see item above on making sure your cable is clean, or swap out usb cable as it may not be working properly & try again with a new cable.
- Lastly, some devices may need a firmware update to even connect, as with the cases of the Lexar USB3.0 Card Readers and some Seagate USB HD's some folks here are experiencing with their Retinas.
Here's another thread that may also be useful concerning an external Toshiba Canvio HD.
It's not much, I know, but hope this helps, if a little.

Fantom external hard drive won't mount

I am using an imac G3 with OS 10.3.9. Until yesterday my Fantom external hard drive mounted. I dismounted it and turned it off. I went to turn it back on later and it won't mount. I selected initialize from the dialogue box that says it won't mount and when disk utility comes up it show the two icons for the internal hard drive and just one for the external so I can't do anything with it. Thanks for your help.
imac Mac OS X (10.3.9)
imac Mac OS X (10.3.9)
imac Mac OS X (10.3.9)

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.3.9 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE
p.s. Hi to you too Sherry! Keep up the good work!

External Hard Drive Won't Mount in 10.2.8

Greetings,
I have a MacBook Pro running the latest version of Tiger. I have a Maxtor 300 GB external hard drive (Mac OS Extended [journaled] ) which I use with my MacBook to store music, video, other media, and backups. I connect that drive to my MacBook via FireWire, normally, but the drive can also do USB.
Since wireless connectivity is so nice, I thought it would be nice to be able to access that hard drive from anywhere in my apartment, without being tethered to the drive by a FireWire cable.
Enter my wife's iBook G3 and Mac OS 10.2.8.
She has this computer from her school where she teaches. It has a G3 processor running at 600 mhz with 128 mb of ram. Since she rarely uses the old machine, I wanted to use it to "serve" my external hard drive to my MacBook.
But when I connect the hard drive to the iBook via either USB or FireWire, it does not mount. I ran Disk Utility and the drive is visible in the pane on the left of the interface, but when I verify the disk I get lots of error messages that say, "Reserved fields in the catalog record have incorrect data."
I don't want to let the iBook repair the disk because I am afraid it my screw the whole thing up and I would lose all my data...not a good proposition.
So, my question: What is going on here? Is this drive simply not going to work with 10.2.8?
I wish I could upgrade the machine to Tiger, but it does not have the minimum system requirements!
Thank you very much for your help. I apologize if I missed something else in the forums that addressed this same issue.
Macbook Pro 2.0 Ghz Intel Core Duo 1 GB Ram 15.4" LCD Mac OS X (10.4.7)

All you need to upgrade the iBook for Tiger is another 128 MBs of RAM. It has both Firewire and USB ports. You do want to upgrade it for what you plan to do. The problem you may continue to have, however, may be due to the fact that the age of the computer is such the disk controller does not support hard drive volumes larger than 128 GBs, which is probably the reason the drive won't mount.
The reason you get DU errors is likely because the drive was formatted using the Intel Tiger version of DU, while you were using the Jaguar version. That's a definite no-no.

External Hard Drive Won't Mount Via USB

I have a Western Digital (Model #WD2500...) Hard Drive that is about 3 years old. I initially set it up on a PowerBook running Mac OS 10.3.x. I have two newer laptops both running Snow Leopard, and neither will recognize my drive via USB 2.0.
The weird part is that the drive will mount when connected via Firewire (400 in this case). My newest laptop is on of the new MacBook Pros and it only has Firewire 800. I'm guessing I could probably get a 400 to 800 Firewire cable, but it would be much easier to just use the USB 2.0 connection. Any idea why the drive won't mount over USB 2.0?
I went to the Western Digital site, and there didn't appear to be any new drivers or firmware for this product. The drive seems to run perfectly well over the Firewire connection, so I don't see what the issue is with USB. The documentation that came with the drive indicates that it should work with USB. This is very baffling to me, so any help would be greatly appreciated.
Thanks so much!!

In most external drive enclosures that have both USB and Firewire interfaces, the Firewire interface is able to draw enough power to run the drive. Firewire can provide up to 45 watts and up to 30 volts of power per port (not all devices supply the full wattage; my MacBook model provides up to 8 watts). USB 2.0 and earlier can only provide 5 volts at 500 milliamps (up to 2.5 watts). Some newer laptop drives are at or under 500 milliamps, but just barely, and the enclosure itself needs some power.
It sounds like the USB port on your enclosure is bad. Firewire is going to provide faster transfer rates anyway, and you don't have to bother with the power supply. Based on your comments, I suspect it still might be a bad power supply, or maybe it's not the right one for the drive. Those things are easy to mix up.
If you're brave enough to crack the external drive open, what you'll find inside is a standard off-the-shelf hard disk drive, with either a SATA or PATA interface, in an enclosure. You can move the drive to a new enclosure easily.

My Toshiba external hard drive won't mount after OSX Mavericks update. Please help.

Similar Messages

Maybe you are looking for