My Toshiba TV 40TL933 does not turn with the command

Hi
I have a Toshiba 40TL933 TV and the remote turn on the LED changes from red to green but the screen goes black, no load. It has happened three times since I bought it and only a month ago.
The current disconnect and re-plug in and then it works correctly. Do you think it may be by the software, which would have to upgrade?
Thank you very much

I have the same problem, today my tv did not start, led was green and i had to unplug it. After unplug it worked but i'm afriaid that some day will not start at all.
I really hope that a future firmware version will solve this if it's a firmware problem.
@Toshiba: if u're reading this please do what's best for your customes because it is in your best intrest.

Similar Messages

  • When I turn my phone the picture does not turn with the phone.

    When I turn my phone the picture or the screen on the phone does not turn.

    Possibly you have rotation lock on. Open Control Center (on the home screen swipe up with one finger from below the bottom of the screen up onto the screen). Rotation lock is the icon with a lock at the far right of the top row. That symbol will also appear near the battery status at the right of the status bar if it is locked. Also note that not all apps support rotation.

  • Ipod touch does not turn on the screen shows USB cable and ask to connect to the itune, itune message pops up can not connect because it is locked with pass code how can i turn on this device?

    My son's ipod touch 3 screen shows a USB cable image and ask to connect to the itune. Itune does not connect with the message shows: this device is locked and can not be connected to the itune before you unlock it" I have no idea how to turn on this device and how to connect this to the itune, any help is highly appreciated.

    Try to get it to recognize it by using DFU Mode. Then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • When I turn my iPod the screen does not turn with it  :(

    When I turn my iPod the screen does not turn with it  >:(

    Try here:
    iOS: Not responding or does not turn on

  • HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Okay, the Wi-Fi doesn't work.  Turn it on.
    Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
    When responding, post in your native language as your English makes very little sense.

  • Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

    Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

    Julien-
    I have the Apple MC184LL/A Bluetooth Wireless Keyboard.  The brigtness control works with mine, as do most of the other functions.
    Try cycling the keyboard off and on.  Hold the power button until the green LED goes out.  Then press it one more time to turn it back on.
    You might try resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  Then you may need to reconnect your WiFi and Bluetooth.
    If that doesn't help, try resetting/rebooting the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart in a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

    fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

    I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

  • SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

    I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
    I am trying to install Acrobat XI Std silently by SCCM.
    I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
    I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
    Is there a way to check the language specified for ym serial number?
    Bryndon

    Update on a couple of details:
    @Sabian,
    Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
    @Sebastian
    I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
    The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

  • Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

    I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
    It does the same thing when using msi with the command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    Here is my setup.ini file
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.1
    RequireIE=7.0.0000.0
    Require64BitVC10RT=1
    CmdLine=/spb /rs /sl"1036"
    [Product]
    msi=AcroPro.msi
    vcrtMsi=vc_red.msi
    vcrtDir=VC10RT_x64
    Languages=1033;1036
    2052=Chinese Simplified
    1028=Chinese Traditional
    1029=Czech
    1030=Danish
    1043=Dutch (Netherlands)
    1033=English (United States)
    1035=Finnish
    1036=French (France)
    1031=German (Germany)
    1038=Hungarian
    1040=Italian (Italy)
    1041=Japanese
    1042=Korean
    1044=Norwegian (Bokmal)
    1045=Polish
    1046=Portuguese (Brazil)
    1049=Russian
    1051=Slovak
    1060=Slovenian
    1034=Spanish (Traditional Sort)
    1053=Swedish
    1055=Turkish
    1058=Ukrainian
    1025=English with Arabic support
    1037=English with Hebrew support
    6156=French (Morocco)
    CmdLine=TRANSFORMS="AcroPro.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=3
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
    Does it means that the serial number provided was invalid for deploying ?
    NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that.  For now it's only not working at the command line.
    Another important point is that the install works great without customization !  If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
    So what goes wrong ?

    Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
    I retried installing the initial package in French on a Windows 7 English and the software installed properly in French. 
    As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
    Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
    That gave me the cue I needed to know.  I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
    I ran again the same command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    And everything works fine.
    NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first.  Otherwise the installation failed without any error message.
    Thanks again to you for your good hint,
    Bob

  • Recovery scenario - Voting disk  does not match with the cluster guid

    Hi all,
    Think of you can not start your guest VMs just because it has a corrupted system.img root image. And assume it contains 5 physical disk( which are all created by the RAC template) hence ASM on them.
    What is the simplest recovery scneario of the guest vms (RAC)?
    Can it be a feasible scenario for recover of the availablity? (Assume both of the RAC system images are corrupted and we prefer not a system level recovery rather than backup / restore)
    1. Create 2 RAC instances using the same networking and hostname details as the ones that are corrupted. - Use 5 different new disks.
    2 Shutdown the newly created instances. Drop the disks from the newly created instances using VM manager.
    3. Add the old disks whose system image is failing to be recoverd but ASM disks are still in use (from the newly created instances using VM manager.) to the newly created instances.
    4. Open the newly created instances
    Can we expect the ASM and CRS could be initialized and be opened without a problem?
    When I try this scenario I get the folllowing error from the cssd/crsd .
    - Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in voting disk does not match with the cluster guid a3eec66a2854ff0bffe784260856f92a obtained from the GPnP profile.
    - Found 0 configured voting files but 1 voting files are required, terminating to ensure data integrity.
    What could be the simplest way of recovery of a virtual machine that has healthy ASM disks but corrupted system image?
    Thank you

    Hi,
    you have a similar problem, when trying to clone databases with 11.2.
    The problem is that a cluster is uniquely identified, and this information is hold in the OCR and the Voting disks. So exactly these 2 are not to be cloned.
    To achieve what you want, simply setup your system in that way, that you have a separate diskgroup for OCR and Voting (and ASM spfile), which is not to be restored in this case of szeanrio.
    Only all database files in ASM will then be exchanged later.
    Then what you want can be achieved.
    However I am not sure that the RAC templates have the option to install OCR and Voting into a separated diskgroup.
    Regards
    Sebastian

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • Chart size does not extend with the data

    Hi,
    One of my reports has a horizontal bar and the chart size does not grow with the data. The chart displays fine if I have minimal amount of data. If the data grows, the display is bizarre, it's just messed up. Is there an option I need to set? Please provide your inputs.
    Thanks
    Arch

    Hi,
    I tried with all these options, but no success. I remember I used to get full visible charts initially. Not sure what has happened charts are getting chopped off by at least 50px right and bottom. Interestingly When I export the chart to Excel it looks perfect.
    Any suggestion. Has anyone faced this issues. I am using 11.1.1.5 version.

Maybe you are looking for